-
Digitus DN-16054-1 - page 1
OUTDOOR IR NETWORK CAMERA Series INST ALLA TION GUIDE Please read instructions thorou ghly before operation and ret ain it for future reference. ...
-
Digitus DN-16054-1 - page 2
2 1. O VERVIEW 1.1 Package Content □ Network camera □ Installation S ticker □ Installation Guide □ RJ45 cable extender adapter □ Ground Wire □ CD-ROM disc (including user manuals & CMS software “V ideo Viewer”) 1.2 Dimensions 1.2 Cable Overview ...
-
Digitus DN-16054-1 - page 3
3 CABLE DESCRIPTION RJ45 network cable Connect it to the supplied RJ45 cable ex tender adapt er for cable extension, and prepare an other RJ45 network cable with suit able length for your connection. Reset wires Remove the insulating coating of thes e two wires, and twist them together to reset default. This will re set all parameters, includi ng t ...
-
Digitus DN-16054-1 - page 4
4 1) Based o n your installation environment, put the power & cideo cable through the bracket, and determine the cabling of your cam era: 3-1 – The ca ble walks along the wall 3-1 – The ca ble is hidden on the other side of the wall. 2) Hoo k the bracket with the camera to the screws fastened in step 2, and push it down to fix the bracket. ...
-
Digitus DN-16054-1 - page 5
5 2.2 Connect to power Get a power cord and cut off it s female conn ector side. Then, remove the insulating coating to reveal positive, negative and ground wires. Find the two wires labeled “AC+” (red) & “A C-” (black) on your camera, and remove a small piece of their insulating coating to reveal the naked wires. T wist the camera’ s ...
-
Digitus DN-16054-1 - page 6
6 3. ETHERNET CONNECTION Before using this network camera, please follow the instructions below to finish the network connection settings based on your installation environment: T o configure the network settings, you must connect the camera to your PC by LAN. For details, please refer to “3.1 Ne twork Connection via LAN” at page 6. T o ...
-
Digitus DN-16054-1 - page 7
7 d) In the “General” tab, select “Use the following IP addres s”, and set the IP address as described below. Note: I t ’ s r e c o m m e n d e d t o n o t e d o w n t h e c u r r e nt settings first and then change as instructed. It’ s helpful when you need to restore the PC network settings for connecting to Internet later . e) Click ...
-
Digitus DN-16054-1 - page 8
8 b) In “LAN or Hi gh-Speed Internet”, right-click o n “Local Area Connection”, and select “Pro perties”. c) In the “General” tab, se lect “Internet Prot ocol (TCP/IP)”, and select “Properties”. d) In the “General” tab, sele ct “Use the following IP address”, and set the IP addre ss to “192.168.1. XXX ” ( XXX can ...
-
Digitus DN-16054-1 - page 9
9 d) In the “General” tab, sele ct “Use the following IP addres s”, and set the IP addre ss as described below. Note: I t ’ s r e c o m m e n d e d t o n o t e d o w n t h e c u r r e nt settings first and then change as instructed. It’ s helpful when you need to restore the PC network settings for connecting to Internet later . e) Clic ...
-
Digitus DN-16054-1 - page 10
10 3.2 Network Configurations via Wizard A quick installation wizard is available via your web browser for passwor d change, date & time settings, and network configurations. For details about the wizard, please refer to “3.2.1 Setting in Wizard” at page 10. For details about DDNS setting for PPPoE and DHCP , please refer to “3.2. ...
-
Digitus DN-16054-1 - page 11
11 Step5: In “Date and Time”, check if the date and time setting are correct and modify if necessary. Step6: In “Network”, select t he network type based on your network environment (Static IP / PPPoE / DHCP), and key in the information needed. Note: This camer a doesn’ t support POE router or hub. For Static IP: a) Enter the information ...
-
Digitus DN-16054-1 - page 12
12 For DHCP: a) Before selecting this optio n, you need to finish the DHCP router settings first. Get a router and connect it to the Internet via y our PC (with Static IP or PPPoE setting). There are different setting methods for different routers. Pl ea se refer to their respective use r manuals. b) Continue the DDNS setting as instructed in “3 ...
-
Digitus DN-16054-1 - page 13
13 Step2: In the live page, click “Configurat ion” to open the configuration page. Step3: Click “Network” “DDNS”, and check “DDNS Enable”. Step4: Select “default” in “System Name”. In “Hostname”, keep t he default value, i.e. the MAC address of this camera , or change the name to a meaningful one. It’s easier to me ...
-
Digitus DN-16054-1 - page 14
14 3.3 Network Configurations via V ideo Viewer 3.3.1 Install the software Step1: Place the supplied CD into your CD- ROM or DVD-ROM driv e. The program will be automatically run. Step2: Click “Program” in the “Video Viewer” se ction to install Video Vie wer, or click “Download The Latest Version” under “Program” to downl oad the la ...
-
Digitus DN-16054-1 - page 15
15 Step2: Select “Network” to make network settings based on your network environment . There are three network connection types: Static IP, PPPOE, and DHCP. Note: This camer a doesn’ t support POE router or hub. For Static IP: a) Enter the information of “S erver IP”, “G ateway” and “NetMa sk” obtained from your ISP (Internet Ser ...
-
Digitus DN-16054-1 - page 16
16 e) Click “Apply”, and cli ck “O K” to exit the setting page. For DHCP: a) Finish the DHCP route r setting. Get a router and connect it to the Internet vi a your PC (with Static IP or PPPoE setting). There are different setting methods for different routers. Please refer to their respective user manuals. b) Go to “N etwork” “DDN ...
-
Digitus DN-16054-1 - page 17
17 f) Click “Apply”, and click “OK” to exit the setting page. Step3: Disconnect your camera and your PC, and connect them to Internet separately. Step4: Add the IP address or hos t name of your camera in “ ” of Video Viewer with correct user name and password, and cli ck it twice to see if you can access to your camera. 3.3.3 Change the ...
-
Digitus DN-16054-1 - page 18
18 APPENDIX CREA TING AN ACCOUNT FOR DDNS SER VICE For PPPOE or DHCP , you should enter the host nam e which points to the IP address of your network camera for login first. Besides using the default DDNS service, you can also apply for new DNS services. There are many websites for free DDNS servic e application, and below shows an exam ple of DDNS ...
-
Digitus DN-16054-1 - page 19
19 S tep3: The system will automatically send a c onfirmation email to your email account. Please read this email within 48 hours and co mplete the procedure to activate your account according to the instructions in the email. When the account is confirmed, you will see “Account Confirmed”. Y our account is created successfully now . S tep4: Cl ...
-
Digitus DN-16054-1 - page 20
20 S tep6: Click “Activate Services” after checkout, and you’re ready to use DDNS services now . S tep7: Return to V ideo Vi ewer , and go to “Network” “DDNS”. ‧ Select “On” for DDNS. ‧ Select the system name you set when sub scribi ng the DDNS service from the drop-down list, for example, dyndns . ‧ Enter the user name ...
Haben Sie eine Frage bezüglich Digitus DN-16054-1?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Digitus DN-16054-1 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Digitus DN-16054-1 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.