Bedienungsanleitung Sharp PGD210U

40 Seiten 0.49 mb
Download

Zur Seite of 40

Summary
  • Sharp PGD210U - page 1

    PG-D210U LCD PROJECT OR PROJECTEUR LCD PRO YECT OR LCD OPERA TION MANU AL MODE D’EMPLOI MANU AL DE OPERA CION ENGLISH E FRANÇAIS F ESP AÑOL ES Contents E • Impor tant Inf ormation ................................................................... 1 • Impor tant Saf eguards ................................................................... ...

  • Sharp PGD210U - page 2

    E-1 Dear SHARP Customer Welcome to the SHARP Family . W e are pleased that you ar e now the owner of a SHARP Color LCD Pr ojector built for outstanding quality , reliability and perfor mance. Every SHARP Color LCD Projector is adjusted for a pr oper pictur e and has passed through the most stringent quality contr ol tests at the factory . We have p ...

  • Sharp PGD210U - page 3

    E-2 Impor tant Safeguar ds Electrical energy can perfor m many useful functions. This unit has been engineered and manufactur ed to ensur e your personal safety . But IMPROPER USE CAN RESUL T IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguar ds incorporated into this LCD Pr ojector , observe the following basic rules ...

  • Sharp PGD210U - page 4

    E-3 14. Lightning—For added protection for this pr oduct during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will pr e- vent damage to the product due to lightning and power -line surges. 15. Overloading—Do not overload wall outlets, ex ...

  • Sharp PGD210U - page 5

    E-4 Notes on Operation About the T emperature Monitor Function: • If the projector starts to overheat due to set-up problems or a dirty air filter , “TEMP .” will flash in the upper -left corner of the picture. If the temperature continues to rise, then the lamp will turn off, the TEMPERA TURE WARNING indicator will flash, and after a 90-seco ...

  • Sharp PGD210U - page 6

    E-5 Location of Contr ols FR ONT VIEW Cautions: • The exhaust vent, the lamp cage cover and adjacent areas may be extremely hot during pr ojector operation. T o prevent injury , do not touch these areas until they have suf ficiently cooled. • Allow at least 4 ( (10 cm) of space between the cooling fan (exhaust vent) and the other near est wall ...

  • Sharp PGD210U - page 7

    E-6 P osition of MOUSE/ADJUSTMENT switc h BLACK SCREEN (RED) ON (RED) ADJ. MENU (RED) ENTER (RED) ADJ. ß / © , ƒ / ∂ (NOT LIT) — Operating the Wireless Mouse Remote Contr ol The functions of your personal computer’ s mouse have been built into the remote contr ol enabling you to operate your projector and personal computer with the r emote ...

  • Sharp PGD210U - page 8

    E-7 Inserting the batteries Remove the battery cover as shown and inser t four AA size batteries making sure their polarities match the ( ` ) and ( 1 ) marks inside the battery compar tment. Notes: Incorrect use of batteries may cause them to leak or burst. • Insert the batteries with the ( ` ) and ( 1 ) polarities as indi- cated. • Remove the ...

  • Sharp PGD210U - page 9

    E-8 Wireless Mouse Functions Connection Example The wireless mouse functions and laser pointer on the remote contr ol can help you create a mor e professional presentation. • By connecting the supplied computer control cable to the PC CONTROL terminal on your projector and the supplied mouse control cables to the mouse terminal on your personal c ...

  • Sharp PGD210U - page 10

    E-9 Setting Up the Pr ojector Using the Focus and Zoom • Zoom, Focus and Reversed/Inverted Image mode functions broaden your options for pr ojector placement. • See pages 10, 11 and 12 for details on projector setup. SIDE VIEW 1. T urn on the MAIN PO WER T ur n on the MAIN POWER switch on the back of the projector . 2. T urn on the PO WER Press ...

  • Sharp PGD210U - page 11

    E-10 Height of Projector Adjust to match the setup configuration. Pr ojector Distance and Picture Size Relationship • The zoom lens allows adjustment of the image size within the projector ’ s range. • For optimum picture adjustment, the pr ojector should be placed and adjusted at a distance between 4.6 ft (1.4 m) and 57.4 ft (17.5 m) from th ...

  • Sharp PGD210U - page 12

    E-11 Using the Image In ver t/Re ver se Function This projector is equipped with an image invert/reverse function. The pr ojected image can be inverted or reversed by using the MENU button and the ADJUSTMENT ƒ / ∂ and ß / © buttons. 1 BLK SCRN DISP IMAGE ADJ. REVERSE INVERT INPUT DISPLAY [ OFF ] [ OFF ] [ OFF ] [ OFF ] :SEL. :ADJ. :END MENU BL ...

  • Sharp PGD210U - page 13

    E-12 Example of a ceiling-mount setup Before mounting the pr ojector , be sure to contact your near est Authorized Sharp Industrial LCD Products Dealer to obtain the manufacturer r ecommended ceiling mount bracket (sold separately). (AN-XGCM40 Ceiling Mount Bracket, AN-EP101AP Extension T ube for AN-XGCM40). T OP VIEW • If the relative positions ...

  • Sharp PGD210U - page 14

    E-13 2 1 Adjuster r elease Adjusting the Height of the Picture Use the adjuster r elease to adjust the angle of the projector and height of the pictur e. Minor adjustments can be made with the adjusters. 1. Press the adjuster release and lift the projector to the desired angle with both hands • The adjuster legs will extend to the surface of the ...

  • Sharp PGD210U - page 15

    E-14 ➔ Connecting the Pr ojector (VIDEO 1, VIDEO 2) T o playback audio and video with the projector connected to a VCR, Laser Disc Player or external audio amplifier , make the following connections. • Always turn off the LCD Pr ojector while connecting to video equipment, in order to pr otect both the pr ojector and the equipment being connect ...

  • Sharp PGD210U - page 16

    E-15 Connecting the Pr ojector (RGB 1, 2: Computer) COMPUTER AUDIO PC CONTROL COMPUTER RGB VIDEO S-VIDEO 12 L OFF ON R LR AUDIO IN 2 IN 1 AUDIO OUTPUT IN 1 OUT IN 2 WIRED REMOTE IN 1 IN 2 110-120V/ 200-240V~ 15-pin D-Sub RGB Signal Cable (Supplied) Audio Cable for Personal Computer (Supplied) Rear terminals • Please carefully r ead the manual of ...

  • Sharp PGD210U - page 17

    E-16 Connecting to the Computer RGB Input (RGB 1, 2)/Output T erminals Y ou can connect your projector to a computer for easy pr ojection of full-color computer images, and an external monitor for simultaneous viewing. 2 ! 1. Connecting to an IBM-PC (V GA, SV GA, XGA, SXGA) Series computer—1,280 @ 1,024 maxim um resolution Plug one end of the RGB ...

  • Sharp PGD210U - page 18

    E-17 5. Connecting an external monitor Connect your computer monitor to the projector’ s COM- PUTER RGB OUTPUT terminal to view images simulta- neously on the external monitor and the projection screen. Select either RGB 1 or RGB 2 to output the images to the monitor . 5 3. Connecting to other compatible computers When connecting the projector to ...

  • Sharp PGD210U - page 19

    E-18 Input Signals (Recommended Timing) For IBM and compatibles For Apple Macintosh Series Input signals: The video output signal timing of differ ent types of video signals are shown below for r efer ence. E D O M M B IM B IM B IM B IM B IM B IM B IM B IM B Ie l p p Ae l p p Ae l p p A A G VA S E VA G V SA G V SA G V SA G V SA G XA G XA G X h s o ...

  • Sharp PGD210U - page 20

    E-19 RGB Adjustment Contr ols When displaying computer patterns which repeat every other dot (tiling, vertical stripes, etc.), inter ference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur , use the ADJUSTMENT ß / © buttons for HORIZONT AL (LEFT/RIGHT) ...

  • Sharp PGD210U - page 21

    E-20 Computer Mode Memory Adjustments • The projector has been pr eset with dif fer ent modes for use with XGA and other compatible computers. However , 7 memory positions are provided to store mode adjustments. • Each memory position can be used to store mode adjustments to match the computer . 1. Press the ENTER button to select the Memory Ad ...

  • Sharp PGD210U - page 22

    E-21 Basic Operation of the Pr ojector 1 1. Connect the A C cord Connect the supplied AC cord to the AC inlet on the back of the projector . OFF ON 110-120V/ 200-240V~ 1 AC cord 2 2. T urn on the MAIN PO WER Press the MAIN POWER switch on the back of the projector . The POWER indicator lights red and the projector enters ST ANDBY mode. ON OFF POWER ...

  • Sharp PGD210U - page 23

    E-22 4. Select one of eight ON-SCREEN DISPLA Y languages Y ou can return to the previous scr een by se- lecting the uppermost item (turquoise) with the ADJUSTMENT ƒ / ∂ buttons (in this case, “LAN- GUAGE”) and then pressing the ENTER button. The on-scr een display is set to English at the fac- tory . The language for the unit’ s ON-SCREEN ...

  • Sharp PGD210U - page 24

    E-23 6. Select input Press the INPUT SELECT button on the pr ojector to switch the pictur e input. When you press the but- ton, the current input mode is displayed for about 4 seconds. If you press the button again while the input mode is displayed, the mode changes as shown on the left. Confirm the selected input ter minal and press the INPUT SELE ...

  • Sharp PGD210U - page 25

    E-24 Adjusting the Picture • This projector ’ s picture is factory pr eset to standard settings. However , you can adjust it to suit your own prefer ences with the ADJUSTMENT buttons on the projector and the r emote contr ol. • The adjustments can be memorized in RGB 1, RGB 2, VIDEO 1 or VIDEO 2 separately . • Four picture modes can be adju ...

  • Sharp PGD210U - page 26

    E-25 • The projector’ s audio is factory preset to the standard setting. However , you can adjust it to suit your own prefer ence with the ADJUSTMENT buttons on the projector or the r emote contr ol. • Y ou can adjust the “BALANCE”, “TREBLE” and “BASS”. Adjusting the A udio • T o return to the factor y preset mode, pr ess the AD ...

  • Sharp PGD210U - page 27

    E-26 Functions on the Pr ojector Setting Up the System Using this function, you can check the input signal and lamp usage time, and select the remote mouse. Chec king the system and lamp usage time • Press the MENU button. Select “SYSTEM SETUP” with the ADJUSTMENT ƒ / ∂ buttons. Then press the ENTER button to change to the picture indicate ...

  • Sharp PGD210U - page 28

    E-27 Using the Blac k Screen Function This projector is equipped with a Black Scr een Function. This function can be used to black out the presentation image. • Press the BLACK SCREEN button on the pr ojector or the remote contr ol to display the black scr een. Press the BLACK SCREEN button again to return to the presentation image. Note: • Whe ...

  • Sharp PGD210U - page 29

    E-28 Using the Blue Screen Function This projector is equipped with a Blue Scr een function that will turn the screen blue when the video input termi- nal is not connected to anything, or the video component is turned off. • Press the MENU button. While the MENU scr een is displayed, press the ADJUSTMENT ƒ / ∂ buttons to select “IMAGE ADJ.? ...

  • Sharp PGD210U - page 30

    E-29 Air Filter Maintenance • The air filter should be cleaned every 100 hours of use. Clean the filter more often when the projector is used in a dusty or smoky location. • Have your near est Authorized Sharp Industrial LCD Products Dealer or Ser - vice Center exchange the filter (PFILD0080CEZZ) when it is no longer pos- sible to clean it. Cle ...

  • Sharp PGD210U - page 31

    E-30 Lamp/Maintenance Indicator s Lamp The lamp operating life differs, depending on the usage envir onment. It is r ecommended that the lamp be replaced after 4,000 cumulative hours of use. • When the lamp is nearing the end of its operating life, the picture and color quality will deteriorate. At this point, r eplace the lamp. (See pages 31 and ...

  • Sharp PGD210U - page 32

    E-31 Lamp Replacement The lamp in the projector has a finite service life. The lamp operating life dif fers, depending on the usage environment. It is r ecommended that the lamp be r eplaced after 4,000 cumulative hours of use. The lamp usage time can be checked at the On-Screen display . (See page 26.) • Replace the lamp when the picture starts ...

  • Sharp PGD210U - page 33

    E-32 Caution: • Because some parts may not be sufficiently cooled, be sur e to remove the lamp cage by the handle while taking car e not to touch the metallic areas. Installing the lamp unit 1. Hold the lamp cage (i) by the handle (h) and press it in firmly while making sure that gr ooves on the side of the lamp cage (j) are pr operly aligned wit ...

  • Sharp PGD210U - page 34

    E-33 Connection Pin Assignments Analog RGB 1 and 2 Signal Input and Analog RGB Output T erminal: 15-pin mini D-sub female connector Computer Input Analog 1. V ideo input (red) 2. V ideo input (gr een/sync on green) 3. V ideo input (blue) 4. Reserve input 1 5. Composite sync 6. Earth (r ed) 7. Earth (green/sync on gr een) 1 15 5 6 11 10 8. Ear th (b ...

  • Sharp PGD210U - page 35

    E-34 RS-232C T erminal Specifications 1. PC control A personal computer can be used to contr ol the projector by connecting the supplied computer contr ol cable to the PC CONTROL 1 terminal on the projector and an RS-232C cable (cr oss type) (not supplied) to the computer , and then connecting the RS-232C cable to the computer control cable. (RS-23 ...

  • Sharp PGD210U - page 36

    E-35 → ← Unit CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS 1 C2 C3 C4 C1 P2 P3 P4 P VOLUME ADJUSTMENT _ _ * VOLUME (0 – 60) _ _ _ MUTE OFF _ _ _ MUTE ON AUDIO ADJUSTMENT _ * * BALANCE ( ! 30 – ~ 30) _ * * TREBLE ( ! 30 – ~ 30) _ * * BASS ( ! 30 – ~ 30) _ _ _ AUDIO DISPLAY _ _ _ RESET RGB 2 ADJUSTMENT _ * * PICTURE ( ! 30 – ~ 30) _ ...

  • Sharp PGD210U - page 37

    E-36 Wired Remote Contr ol T erminal Specifications 1. Specifications of wired remote control input • 3.5ø minijack • External: ` 5 V (1 A) • Internal: GND 2. Function and transmission codes Wir ed remote contr ol function code 1 0 1 1 0*** * **** 1 0 C1 System Code C5 C6 Data Code C13 C14 C15 LSB MSB • System codes C1 to C5 are fixed at ? ...

  • Sharp PGD210U - page 38

    E-37 Specifications Product T ype Model Video system Display method LCD panel Lens Projection lamp Contrast ratio Video input signal S-video input signal Horizontal resolution Audio output Computer RGB input signal Computer Control Cab le (Supplied) RS-232C input terminal Mouse input terminal (for IBM/Mac) Mouse input terminal (for PC98) Speaker sy ...

  • Sharp PGD210U - page 39

    E-38 10.3 (261) 0.2 (5) 4.0 (101)(Max.) 1.9 (49) 10.5 (267) 1.9 (47) 0.8 (21) 13.0 (329) 1.1 (29) 2.8 (71) 0.7 (18) 8.0 (204) 5.4 (137) Dimensions Side View (Lens housed) (Lens extended) [Units: inches (mm)] Fr ont View Rear View T op View Bottom View ...

  • Sharp PGD210U - page 40

    SHARP CORPORA TION OSAKA, J AP AN Printed in Japan Imprimé au Japon Impreso en J apón TINS-6785CEZZ T2184-A 9P06-JWG ...

Produzent Sharp Kategorie Projector

Dokumente, die wir vom Produzenten des Geräts Sharp PGD210U erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Sharp
- Bedienungsanleitungen PGD210U
- Produktkarten Sharp
- Informationsbroschüren
- oder Energieetiketten Sharp PGD210U
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Sharp PGD210U.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Sharp PGD210U, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Sharp PGD210U. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Sharp PGD210U ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Sharp PGD210U, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Sharp PGD210U hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Sharp PGD210U verständlich ist.

Eine gänzliche Bedienungsanleitung von Sharp sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Sharp PGD210U bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Sharp PGD210U befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Sharp PGD210U, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Sharp PGD210U - die uns die ersten Schritte während der Nutzung von Sharp PGD210U erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Sharp PGD210U hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Sharp PGD210U im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Sharp PGD210U?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Sharp PGD210U nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Sharp PGD210U hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)