Deutsch dropdown-ico

Bedienungsanleitung Lathem 5000E Plus

62 Seiten 2.26 mb
Download

Zur Seite of 62

Summary
  • Lathem 5000E Plus - page 1

    Lathem Time Cor p oratio n ...

  • Lathem 5000E Plus - page 2

    This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy ...

  • Lathem 5000E Plus - page 3

    PRECAUTIONS This user's manual is prepared for safe and proper use of the unit. Please follow all the instructions to avoid possible danger to yourself or others and damage to the unit. Signs Various warnings and cautions are provided throughout this manual along with signs. Remember each sign and its explanation listed below for your safety a ...

  • Lathem 5000E Plus - page 4

    If foreign matter should get in the unit (including a piece of metal, water, or liquid), disconnect the plug from the outlet immediately and contact your dealer for servicing. There is a danger that further use may cause a fire or electric shock. Do not place the unit on an uneven or tilted surface. This may result in injuries due to the unit dropp ...

  • Lathem 5000E Plus - page 5

    TABLE OF CONTENTS INTRODUCTION & FEA TURES BEFORE USING THE TIME RECORDER Attached Accessories Location of Name Print Position on T ime Card QUICK EASY SETUP OPTIONAL FUNCTIONS HOW TO PROGRAM THE TIME RECORDER SETTING THE TIME SETTING THE DA TE SETTING THE 12/24 HOUR FORMA T SETTING THE PRINT ORDER SETTING THE PRINT P A TTERN SETTING THE PREPRO ...

  • Lathem 5000E Plus - page 6

    1. INTRODUCTION & FEA TURES 2 1 I NTRODUCTON: Thank you for purchasing the 5000E plus. W e are confident this Time Recorder will give you full satisfaction. Items such as the time and date are prese t at the facto ry . Af ter plugging in the AC po wer the T ime Recorder can be used immediately . However, we recommend reading this manual before ...

  • Lathem 5000E Plus - page 7

    2.BEFORE USING THE TIME ST AMP 2 1 Package Contents Unpack the Time Recorder and check its contents to ensure that the Time Recorder unit and all accessories as shown below are included. • Keys ................2 pcs. ................1 pcs. .......4 pcs. ....1 sheet. • Ribbon Cassette • Wall-Mount Fittings Screw Template • The ribbon casette ...

  • Lathem 5000E Plus - page 8

    3. QUICK EASY SETUP 2 3 2 JAN 31 12:00 1 Unlock the key and remove the top case. 3 Replace the cover and lock. 2 Remove the PROTECTION P AD. 4 Plug the AC cord into the AC outlet and insert a card. C A U T I O N C A U T I O N (Print example) Protection PAD AC outlet AC cord Card ...

  • Lathem 5000E Plus - page 9

    4. OPTIONAL FUNCTIONS 3 Following optional functions are available by adding an optional board. External T ime Signal for Bell, Built-in Buzzer and Slave Clock. External T ime Signal and Built-in Buzzer External time signal and Built-in buzzer shall be controlled by Time table program and their duration settings. Refe r to th e "18. SETTI NG T ...

  • Lathem 5000E Plus - page 10

    5. HOW T O PROGRAM THE TIME RECORDER 2 5 2 T o enter the program setting mode, you must plug the AC cord into the AC outlet and remove the cover . Next press the [SELECT] button once. Then the Time Recorder goes into the program mode showing the " "on the display positioned under the "TIME" mark. Function of 3 control buttons [S ...

  • Lathem 5000E Plus - page 11

    6. SE T TING THE TIME 6 3 1 Press the [SELECT] button and position the " " under the "TIME" mark. At t hat m omen t, th e "Ho ur" fl ash es. (The flashing means it can be changed.) Change the "Hour". In c ase of the e xam ple , pr ess t he [SET] button because the hour is not to be changed. At that moment, th ...

  • Lathem 5000E Plus - page 12

    7. SET TING THE DA TE 6 7 1 Press the [SELECT] button and position the " " under the "DA TE" mark. At that moment, the "Y ear" flashes. (The flashing means it can be changed.) Change the "Y ear". In c ase of the e xam ple , pr ess t he [SET] button because the year 2003 is not to be changed. At that moment, t ...

  • Lathem 5000E Plus - page 13

    8. SE T TING THE 12/24 HOUR FORMA T 8 3 1 Pr es s t he [S EL ECT ] b ut to n an d position the " " under the "HOUR" mark. At t hat m ome nt, t he f las hing dig it indicates "Hour Format Options". (The flashing means it can be changed.) 2 After you finish setting the 12/24 hour format, press the [SET] button once again ...

  • Lathem 5000E Plus - page 14

    9. SET TING THE PRINT ORDER 9 9 1 Press the [SELECT] button and position the " " under the "PRINT ORDER" mark. At t hat m om ent , th e fl as hi ng di gi t indicates "Print Order Options". (The flashing means it can be changed.) 2 After you finish setting the print order , press the [SET] button once again. Now the pri ...

  • Lathem 5000E Plus - page 15

    10. SE T TING THE PRINT P A T TERN 10 3 1 Press the [SELECT] button and position the " " under the "PRINT P A TTERN" mark. At t ha t mo men t, t he fl as hin g di git indicates "Y ear Digit Options". (The flashing means it can be changed.) 2 Change the "T ype of Minute". In c ase of t he e xamp le, p res s th ...

  • Lathem 5000E Plus - page 16

    10 11 3 Change the "Leading Zero". In c ase of t he e xam ple, p res s th e [CHANGE] button to set at "2". And then press the [SET] button. 4 Af ter yo u fi nis h s ett ing th e pr int pattern, press the [SET] button once again. Now the print pattern setting has been co mpl ete d. Rep lac e t he co ver an d lock. Important: If y ...

  • Lathem 5000E Plus - page 17

    1 1. SE T TING THE PREPROGRAMED COMMENTS 12 11 1 Press the [SELECT] button and position the " " under the "COMMENT" mark. At th at mo me nt, t he fla sh ing d igi t indicates "Comment Options". (The flashing means it can be changed.) 2 After you finish setting the comment, press the [SET] button once again. Now th e p ...

  • Lathem 5000E Plus - page 18

    12. SET TING THE CUST OMIZED COMMENTS 13 13 1 Press the [SELECT] button and position the " " under the "PRINT ORDER" mark. At t ha t mom en t, th e fl as hin g di git indicates "Print Order Options". (The flashing means it can be changed.) Press the [CHANGE] button to set at the "30" (Customized Comments). At ...

  • Lathem 5000E Plus - page 19

    14 14 3 Press the [SELECT] button and position the " " under the "COMMENT" mark. Setting the 1st comment line. At th e m ome nt , t he fl ash in g d igi t indicates "Character Position". And then press the [SET] button. At th e m omen t, t he fla shin g c han ges from "Character Position" to "Character C ...

  • Lathem 5000E Plus - page 20

    14 15 5 The 2nd character is "B", then enter the character code "03". Press the [CHANGE] button until the corr ect c harac ter co de app ears. A nd then press the [SET] button. SELECT CHANGE SE T 7 Follow the same procedure for further characters settings. 8 Setting the 2nd comment line Press the [SET] button to change the comme ...

  • Lathem 5000E Plus - page 21

    16 15 9 The 2nd character is "SP ACE", then enter the character code "01". Press the [CHANGE] button until the corr ect c harac ter co de app ears. A nd then press the [SET] button. SELECT CHANGE SE T Follow the same procedure for further characters settings. 12 11 10 Setting the 3rd comment line Press the [SET] button to change ...

  • Lathem 5000E Plus - page 22

    16 17 13 The 2nd character is "O", then enter the character code "10". Press the [CHANGE] button until the corr ect ch aract er cod e appe ars. And then press the [SET] button. SELECT CHANGE SE T 15 A ft e r yo u fi n is h s et t in g th e cu st om iz ed co mm en ts , p re ss th e [SET] button three times. Now the customized com ...

  • Lathem 5000E Plus - page 23

    18 18 Press the [SELECT] button and position the " " under the "PRINT ORDER" mark. At t ha t mom en t, th e fl ash ing dig it indicates "Print Order Options". (The flashing means it can be changed.) In c ase of the e xam ple , pr ess t he [SET] button because the "Print Order Options" not to be changed. At th ...

  • Lathem 5000E Plus - page 24

    18 19 Confirming the 1st comment line T o confirm the customized comments that have been set, press the [SELECT] button a n d p o s i t io n t h e " " u n d e r t h e "COMMENT" mark. At that moment, the "Character Position" flashes, and press the [CHANGE] button. While t he "Chara cter Posit ion" chan ges, th ...

  • Lathem 5000E Plus - page 25

    20 19 Changing the Customized Comments I n c a se o f e x a mp l e , p r e s s t h e [C HA NGE ] b ut ton to se t at "5 ". And th en pr es s t he [S ET ] b ut ton . A t t ha t mo me nt, fl ash in g cha ng es fr om th e " C h a r a c t e r P o s i t i o n " t o t h e "C ha rac te r C od e" . Press the [CHANGE] button to ...

  • Lathem 5000E Plus - page 26

    13. SET TING THE LANGUAGE 20 21 1 Press the [SELECT] button and position the " " under the "LANGUAGE" mark. At th at mo me nt, t he fla sh ing d igi t indicates "Print Language Options". (The flashing means it can be changed.) 2 After you finish setting the language, press the [SET] button once again. Now th e la ngua ...

  • Lathem 5000E Plus - page 27

    14. SET TING THE PRINT METHOD 22 21 1 Press the [SELECT] button and position the " " under the "PRINT METHOD" mark. At t ha t mo men t, t he fl as hin g di git indicates "Print Direction Options". (The flashing means it can be changed.) 2 Change the "Print Activation". In c ase of t he e xam ple, pr ess the [ ...

  • Lathem 5000E Plus - page 28

    22 23 3 Af ter yo u fi nis h s ett ing th e pr int method, press the [SET] button once again. Now the print method setting has been co mpl ete d. Rep lac e t he co ver and lock. Important: If you do not complete Step 3, the T ime Recorder will not print. Au to ma ti c w il l a llo w t he Tim e Recorder to print by simply inserting a card or piece o ...

  • Lathem 5000E Plus - page 29

    15. SET TING THE DA YLIGHT SA VING TIME 24 23 1 Press the [SELECT] button and position the " " next to the "DA YLIGHT SA VING TIME" mark. (The flashing means it can be changed.) SELECT CHANGE SE T Year Month Date Daylight Saving T ime function D.S.T . execution time At 2:00 a.m. on the first day of DST , the clock automatically ...

  • Lathem 5000E Plus - page 30

    24 25 2 Change the "Y ear". In c ase of the e xam ple , pr ess t he [SET] button because the year 2003 is not to be changed. At the moment, the flashing changes from "Y ear" to "Month". 4 Change the "Date". Push the [CHANGE] button to set at "6" and push the [SET] button. At the moment, the "st ...

  • Lathem 5000E Plus - page 31

    26 25 5 Change the "Y ear". In c ase of the e xam ple , pr ess t he [SET] button because the year 2003 is not to be changed. At the moment, the flashing changes from "Y ear" to "Month". 7 Change the "Date". Push the [CHANGE] button to set at "26" and push the [SET] button. At the moment, the "e ...

  • Lathem 5000E Plus - page 32

    26 27 1 Press the [SELECT] button and position th e " " n ext to t he "D A YL IGH T SA VING TIME" mark. (The flashing means it can be changed.) 3 Press the [CHANGE] button to set at " ". Pre ss t he [ SET] b utt on tw ice . T his ca nce ls th e day lig ht sa vin g t ime settings. SELECT CHANGE SE T 2 Press the [SET] bu ...

  • Lathem 5000E Plus - page 33

    16. SET TING THE NUMBER 28 27 1 Press the [SELECT] button and position the " "next to the "NUMBER" mark. At t ha t mom en t, th e fl as hin g di git indicates "Number Digit". (The flashing means it can be changed.) 2 Change the "Repeat T imes". The Repeat T imes can be set to 0 to 9. In c ase of t he e xam pl ...

  • Lathem 5000E Plus - page 34

    28 29 3 Change the "Reset Options". In c ase of t he e xam ple, p res s th e [CHANGE] button to set at "3". And then press the [SET] button. 4 After you finish setting th e number , press the [SET] button once again. No w th e n umb er s ett ing ha s be en co mpl ete d. Rep lac e t he co ver an d lock. Important: If you do not c ...

  • Lathem 5000E Plus - page 35

    17. SE T TING THE INITIAL NUMBER 30 29 1 Press the [SELECT] button and position th e " " ne xt t o th e "I NI TI AL NUMBER" mark. At t hat m ome nt, t he fl ash ing " " in dic ates th e 1 st di git of th e i nit ial number . (The flashing means it can be changed.) 2 Set the "Initial Number". In c ase of t he ...

  • Lathem 5000E Plus - page 36

    18. SE T TING THE TIME T ABLE PROGRAM 30 31 1 Pr es s t he [S EL ECT ] b ut to n an d pos iti on t he " " ov er t he "TI ME T ABLE PROGRAM" mark. At t hat m ome nt, t he fl ash ing d igit indicates "Program No.". (The flashing means it can be changed.) Setting program No. 1 (1) Set the "Day of the week". Pres ...

  • Lathem 5000E Plus - page 37

    32 2 (2)Set the "Action". Press the [CHANGE] button to set at "1". And then press the [SET] button. At that moment, the display changes to the following figure. • The "Ext. Signal" and the "Built-in Bu zze r" a re a vai la ble o nl y wh en "Optional Board" is connected to the time recorder . (3)Se ...

  • Lathem 5000E Plus - page 38

    32 33 3 Setting program No. 2 Press the [CHANGE] button twice. At that moment, the display changes to the following figure. Make settings for Program No.2 in the same manner as for Program No.1, as illustrated in the following figure, and press the [SET] button. MO TU WE TH FR SA SU SELECT CHANGE SE T TIME TABLE PROGRAM Example 2: The time table pr ...

  • Lathem 5000E Plus - page 39

    34 33 1 Press the [SELECT] button and position th e " " ove r the " TI ME T A BLE PROGRAM" mark. At t hat mom ent , th e fla sh ing d ig it indicates the "Program No.". (The flashing means it can be changed.) 2 Setting program No. 1 (1) Set the "Day of the week". Press the [SET] button. At that moment, the fl ...

  • Lathem 5000E Plus - page 40

    34 35 (3)Set the "Hour". In case of example, press the [CHANGE] button to set at "9". And then press the [SET] button. 3 Setting program No. 2 Press the [CHANGE] button twice. At that moment, the display changes to the following figure. (4)Set the "Minute". In c as e o f ex am pl e, p re ss t he [CHANGE] button to set ...

  • Lathem 5000E Plus - page 41

    36 35 Setting program No. 3 Make settings for Program No.3 in the same manner as for Program No.1, as illustrated in the following figure, and press the [SET] button. 6 After you finish setting the time table program, press the [SET] button once again. 5 Setting program No. 4 Make settings for Program No.4 in the same manner as for Program No.1, as ...

  • Lathem 5000E Plus - page 42

    36 37 Confirming the T ime T able Program settings T o confirm the programs that have been set, press the [SELECT] button and position the " " over the "TIME T ABLE PROGRAM" mark. At that moment, the "Program No." flashes. And then press the [CHANGE] button. After you finish confirming the program, press the [SET] butt ...

  • Lathem 5000E Plus - page 43

    19. S E T T I N G T H E E X T E R N A L T I M E S I G N AL / BU I L T - I N B U Z Z E R 38 37 1 Press the [SELECT] button and position the " " ove r t he " EXT . S IGN AL / BUIL T -IN BUZZ." mark. At t ha t mo men t, t he fl as hin g di git indicates the "Ext. Signal". (The flashing means it can be changed.) 2 Change t ...

  • Lathem 5000E Plus - page 44

    20. SE T TING THE SLA VE CLOCK 38 39 1 Press the [SELECT] button and position the " " over t he "SLA VE CLOC K" mark. At that moment, the flashing digit indicates "Clock Options". (The flashing means it can be changed.) 2 Set the "Clock Options". In c ase of t he e xamp le, p res s th e [CHANGE] button to set ...

  • Lathem 5000E Plus - page 45

    21. SETTING THE P ASSWORD 40 41 1 Press the [SELECT] button and position the " " over the "P ASSWORD" mark. At the moment, the first two digits flash. (The flashing means it can be changed.) Change the first two digits. In c ase of the e xam ple , pr ess t he [CHANGE] button to set at "12". And then press the [SET] but ...

  • Lathem 5000E Plus - page 46

    42 41 1 Pre ss t he [ SELE CT] b utto n, a t th at moment "9999" is displayed and the first two digits flash. (The flashing means it can be changed.) Set the first tow digits. In the example, press the [CHANGE] button to set at "12". And then press the [SET] button. At that moment, the flashing changes to the last two digits. 2 ...

  • Lathem 5000E Plus - page 47

    42 43 1 Pre ss t he [ SELE CT] b utto n, a t th at moment "9999" is displayed and the first two digits flash. (The flashing means it can be changed.) In the example, press the [CHANGE] button to set at "12". And then press the [SET] button. At that moment, the flashing changes to the last two digits. 3 Press the [SELECT] button ...

  • Lathem 5000E Plus - page 48

    22. RESET TING 44 43 T o return all setting to the factory defaults, push the reset switch with a pointed implement. NOTICE: All your custom settings will be deleted and will revert to the factory defaults when the reset switch is pushed. T o make new settings, please refer to "Setting ···". Reset Switch ...

  • Lathem 5000E Plus - page 49

    WALL 23. W ALL MOUNTING 44 45 Caution: The supplied screws are intended for use on a thick wooden wall or wooden column. Do not use any other materials. The Time Recorder may come off if used on other materials. 1 Install the supplied wall-mount screws into a wall by using the template. Be sure to keep about (1/4") 6mm of the screw head away f ...

  • Lathem 5000E Plus - page 50

    24. REPLACING THE RIBBON CASSET TE 46 45 1 Unlock the key and remove the cover . 2 Hold the ribbon cassette by its tab and pull straight out to remove it. 3 T urn the knob of the new cassette in the direction of the arrow (clockwise) to tighten the ribbon. 4 Pl ace t he c ass ette i nsi de t he Tim e Recorder as shown in the figure. Push the ribbon ...

  • Lathem 5000E Plus - page 51

    46 47 5 T urn the knob of the cassette in the direction of the arrow to tighten the ribbon. 6 Replace the cover and lock. NOTICE: Install the cassette so that the ribbon is between the print head and the ribbon mask. Printing will not come out properly if the ribbon is placed behind the ribbon mask. Ribbon Ribbon mask Print head ...

  • Lathem 5000E Plus - page 52

    25. CHARACTER CODE FOR ALPHANUMERIC 48 Num: Sequential number HH: Hour MM: Minute SS: Second DOW : Day of the week 1 15: Language-Specific Character Code Character Code Meaning Code Character Code Meaning NULL SPACE – 3 Insert Character Delete Character Insert Line Delete Line A B C D E F G H I J K L M N O P Q R S T U V W X Y 8 8 8 8 8 8 8 8 5 8 ...

  • Lathem 5000E Plus - page 53

    48 Code Character A B C D E F G H I J K L M N O P Q R S T U V W X Y 7 7 7 7 7 7 7 7 4 7 7 7 8 7 7 7 7 7 7 6 7 7 8 7 6 - - - - - - - - - - - - 3 6 6 4 6 4 6 4 4 5 9 4 5 6 7 8 9 10 11 12 13 14 15 ´ + , - . / : ; _ & Large Character Max. Dots Note: ( ) is to indicate the following meanings. Code=6F: 2 digits setting of YEAR, Code=73 and 74:AM/PM ...

  • Lathem 5000E Plus - page 54

    50 Code Character A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 26 ( 37 ) 40 ( 57 ) 6x ( n ) 6x ( n ) 6x ( n ) 6x ( n ) 6x ( n ) - - - - - - - - - - - - - - - 3 6 6 4 5 4 6 4 4 4 8 HH:MM HH:MM:SS Number Number Number Number Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ...

  • Lathem 5000E Plus - page 55

    50 Language-Specific Character 51 Character Dots Bold Large Small # 9 7 6 $ 9 6 6 @ 9 7 6 [ 7 6 5 8 6 6 ] 7 6 5 ^ 8 6 4 ` 5 4 3 { 7 6 5 | 5 4 4 } 7 6 5 ~ 7 6 6 EURO 8 7 6 English Character Dots Bold Large Small Pt 11 8 8 $ 9 6 6 @ 9 7 6 ¡ 5 4 4 Ñ 8 7 6 ¿ 7 6 6 ´ 5 4 3 ` 5 4 3 ¨ 9 7 7 ñ 7 7 6 } 7 6 5 ~ 7 6 6 EURO 8 7 6 Spanish Character Dots ...

  • Lathem 5000E Plus - page 56

    26. INST ALLING THE Ni-Cd BA T TER Y (OPTIONAL) 52 51 1 Unlock the key and remove the cover . 3 Replace the cover and lock. 2 Insert the ba ttery connector into the compartment connector to install the battery . ...

  • Lathem 5000E Plus - page 57

    27. CONNECTING THE OPTIONAL FUNCTIONS 52 53 1 Unlock the key and remove the cover . 3 Insert wires into two left terminals for the mas ter c loc k, a nd t igh ten b oth screws. 4 Replace the cover and lock. 2 The con nect or fo r the mas ter c lock signals is on the back of the Time Recorder . MASTER CLOC K UNIT Insert the " - " signal ca ...

  • Lathem 5000E Plus - page 58

    54 53 1 Unlock the key and remove the cover . 3 Insert wires into two right terminals for external time signal, and tig hten both screws. 4 Replace the cover and lock. 2 Th e c onn ec to r fo r ex te rn al t im e sig nals is on t he b ack of t he Time Recorder . Connecting the External T ime Signal connector CAUTION: Be sure to pull out AC cord fro ...

  • Lathem 5000E Plus - page 59

    54 53 1 Remove two screws holding the wire clamp. 2 Make wires go through the hole of the wire clamp and secure it with screws. (See the Figure 1.) If diameter of wires is too small to fix by the above method, turn the wire clamp upside down and feed wires through the clamp. Then secure it with screws. (See the Figure 2.) Attaching the Wire Clamp C ...

  • Lathem 5000E Plus - page 60

    28. TROUBLESHOOTING Error No. appears Refer to the following list for proper operation. Conta ct the st ore from w hom you b ought th e unit. Correctly insert the card. Make sure that the ribbon cassette is correctly inserted in place. Press the push bar . Enter the correct password again. Make sure the correct starting and ending date of daylight ...

  • Lathem 5000E Plus - page 61

    29. SPECIFICA TIONS 56 55 Monthly accuracy ± 15sec. (at ordinary temperatures) Y ear up to 2099. Automatically adjusted to leap years, 31-day months and months with thirty or fewer days, and the days of the week. Dot matrix Three years of cumulative power failure hours after the date of shipment. Optional Ni-Cd battery , 200-time printing or 24 ho ...

  • Lathem 5000E Plus - page 62

    Lathem warrants the hardware products described in this guide against defects in material and workmanship for a period of one year from date of original purchase from Lathem or from an authorized Lathem reseller . The conditions of this warranty and the extent of the responsibility of Lathem T ime Corporation ("Lathem") under this warrant ...

Produzent Lathem Kategorie Time Clock

Dokumente, die wir vom Produzenten des Geräts Lathem 5000E Plus erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Lathem
- Bedienungsanleitungen 5000E Plus
- Produktkarten Lathem
- Informationsbroschüren
- oder Energieetiketten Lathem 5000E Plus
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Lathem 5000E Plus.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Lathem 5000E Plus, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Lathem 5000E Plus. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Lathem 5000E Plus ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Lathem 5000E Plus, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Lathem 5000E Plus hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Lathem 5000E Plus verständlich ist.

Eine gänzliche Bedienungsanleitung von Lathem sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Lathem 5000E Plus bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Lathem 5000E Plus befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Lathem 5000E Plus, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Lathem 5000E Plus - die uns die ersten Schritte während der Nutzung von Lathem 5000E Plus erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Lathem 5000E Plus hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Lathem 5000E Plus im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Lathem 5000E Plus?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Lathem 5000E Plus nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Lathem 5000E Plus hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)