Bedienungsanleitung Cresta DTX600

11 Seiten Betrifft nicht
Download

Zur Seite of 11

Summary
  • Cresta DTX600 - page 1

    DTX600 WEA THERST A TION USER MANUAL Thank you for purchasing this device, Please read the operating instructions carefully to familarize yourself with the features and modes of operation before using the instrument. Package Contents Carefully unpack and remove the contents: • 1x weather station main unit • 1x stainless steel mast • 1x thermo ...

  • Cresta DTX600 - page 2

    • Batter ies : 2 x AA, LR 06 1.5V Installation • Installing the Batteries • Open the main unit battery cover located at the back of the unit and insert 2XAA batteries into the battery compartment and close the battery cover . • Pull away the shower proof casing of the thermo-hrgro sensor to reveal the 2 sockets.( for the wind sensor and rai ...

  • Cresta DTX600 - page 3

    • First insert the batteries of main unit, then insert the batteries of the outdoor sensor in 3 minutes after the main unit is powered on, to assure of the sensor data received well. In case of the outdoor sensor data received failure, pls press ALARM key for more than 3 seconds to synchronize the RF signal. • Every time the batteries are repla ...

  • Cresta DTX600 - page 4

    3. Mounting the rain sensor to the second plastic bracket: there are vertical engraved lines at the bottom edge of the round cover and the sensor part, you only need adjust the two line into one position, then turn clockwise, the rain sensor part will be connected well, then fix them with 4 screws onto the plastic bracket ( don’t use only 2 screw ...

  • Cresta DTX600 - page 5

    Note : please don’t put in or take off the plug very of fen,or put the plug outside in the air so long time to avoid any damage of the plug , if so, there will be bad connection. 5. Mounting all the sensors onto the stainless steel mast and fix the whole parts at outdoor open area :(note: please make sure all the cables are connected well into th ...

  • Cresta DTX600 - page 6

    LCD overview 1. Weather Forecast 2. Living space humidity 3. Indoor humidity trend 4. Indoor low battery 5. Rainfall 6. Air Pressure 7. Wind direction 8. Date 9. Wind speed 10. Month 1 1. Day of week 12. Moon Phase 13. Dual alarm 14. Time 15. RCC symbol 16. Summer time 17. Outdoor low battery 18. Outdoor humidity 19. Outdoor humidity trend 20. Indo ...

  • Cresta DTX600 - page 7

    23. RF symbol 24. Indoor temperature alert 25. Outdoor temperature trend 26. Indoor temperature 27. Indoor temperature trend A=MODE B= + C=- D= ALARM E= ALERT F=SNOOZE/LIGHT Initial Operation • After inserting the batteries, the main unit will connect with the outdoor sensor by RF signal. The RF signal symbol at the out area will flash. • This ...

  • Cresta DTX600 - page 8

    • The clock automatically changes from set-up mode to time display mode if no keys are pressed for 20 seconds. • Explanation for the time zone display: Y ou can manually adjust the clock to the time zone of a country (up to 1500km distance to Frankfurt/Main) where the clock receives the DCF signal but where the actual time differs from the time ...

  • Cresta DTX600 - page 9

    • Press “ALERT” for more than 3 seconds, the upper limit of inside temperature is flashing, use “ + “ and “ - “ to set the maximum alert temperature. • Press “ALERT “ , the lower limit of inside temperature is flashing, use “ + “ and “ - “ to set the minimum alert temperature. • Press “ALERT” , the upper limit of o ...

  • Cresta DTX600 - page 10

    Illumination • Press the key “ SNOOZE/LIGHT “ to activate the display illumination for 8 seconds. Moon phase display The weather station uses saved data to show the moon phase A B C D E F G H A: New moon B: increasing cr escent C: First half D: increasing 3/4 E: Full moon F: decr easing 3/4 G: Last half H: decreasing cr escent Living space hu ...

  • Cresta DTX600 - page 11

    • Press “ + “ , “ - “ for more than 3 seconds to enter or quit the Radio controlled signal reception • The clock synchronizes with the DCF radio signal automatically and daily from AM 1:00 to 3:00 to correct potential time deviations each hour . If the synchronization is unsuccessful (“radio tower“ symbol disappears), a further sync ...

Produzent Cresta Kategorie Weather station

Dokumente, die wir vom Produzenten des Geräts Cresta DTX600 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Cresta
- Bedienungsanleitungen DTX600
- Produktkarten Cresta
- Informationsbroschüren
- oder Energieetiketten Cresta DTX600
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Cresta DTX600.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Cresta DTX600, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Cresta DTX600. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Cresta DTX600 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Cresta DTX600, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Cresta DTX600 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Cresta DTX600 verständlich ist.

Eine gänzliche Bedienungsanleitung von Cresta sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Cresta DTX600 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Cresta DTX600 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Cresta DTX600, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Cresta DTX600 - die uns die ersten Schritte während der Nutzung von Cresta DTX600 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Cresta DTX600 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Cresta DTX600 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Cresta DTX600?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Cresta DTX600 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Cresta DTX600 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)