Deutsch dropdown-ico

Bedienungsanleitung Axis Communications M3005-V

58 Seiten 1.17 mb
Download

Zur Seite of 58

Summary
  • Axis Communications M3005-V - page 1

    AXIS M3005-V Network Camera User Manual ...

  • Axis Communications M3005-V - page 2

    About this Document This manual is intended for administrators and users of AXIS M3005–V Network Camera, and is applicable to rmware 5.50 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based system ...

  • Axis Communications M3005-V - page 3

    Safety This product complies with IEC/EN/UL 60950-1, Safety of Information Technology Equipment. If its connecting cables are routed outdoors, the product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage ...

  • Axis Communications M3005-V - page 4

    AXIS M3005-V Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury . CAUTION Indicates a hazardous situation which, if not avoide ...

  • Axis Communications M3005-V - page 5

    AXIS M3005-V Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Message Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications M3005-V - page 6

    AXIS M3005-V Network Camera T able of Contents Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 P erformance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 6 ...

  • Axis Communications M3005-V - page 7

    AXIS M3005-V Network Camera Hardware Overview Hardware Overview 2 3 4 5 6 1 1 Status LED 2 Dome cover 3 Control button 4 microSD card slot 5 Network connector (P oE) 6 Focus ring Connectors and Buttons For technical specications, see page 54 . Control Button For location of the control button, see Hardware Overview on page 7 . The control button ...

  • Axis Communications M3005-V - page 8

    AXIS M3005-V Network Camera Hardware Overview Amber/Red Flashes amber/red if network connection is unavailable or lost. Red Flashes red for rmware upgrade failure. 8 ...

  • Axis Communications M3005-V - page 9

    AXIS M3005-V Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ® and • Chrome TM or Firefox ® with o ...

  • Axis Communications M3005-V - page 10

    AXIS M3005-V Network Camera Access the Product For Technical notes on this and other topics, visit the Axis Support web at www .axis.com/techsup Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which opens when the product is ...

  • Axis Communications M3005-V - page 11

    AXIS M3005-V Network Camera Access the Product The Manual T rigger button is used to trigger an action rule from the Live View page. For information about how to congure and enable the button, see Manual Trigger on page 1 1 . Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the AXIS Media Contr ...

  • Axis Communications M3005-V - page 12

    AXIS M3005-V Network Camera Access the Product Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer . Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specic area. Click i ...

  • Axis Communications M3005-V - page 13

    AXIS M3005-V Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Other applicat ...

  • Axis Communications M3005-V - page 14

    AXIS M3005-V Network Camera Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control P anel (f ...

  • Axis Communications M3005-V - page 15

    AXIS M3005-V Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 15 ...

  • Axis Communications M3005-V - page 16

    AXIS M3005-V Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all setti ...

  • Axis Communications M3005-V - page 17

    AXIS M3005-V Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 17 . • Stream proles. See page 18 . • Camera settings. See page 18 . • View area. See page 19 . • Overlay image. See page 19 . • Privacy mask. See page 2 1 . Set Up Video Streams To set up t ...

  • Axis Communications M3005-V - page 18

    AXIS M3005-V Network Camera Video H.264 H.264, also known as MPEG-4 P art 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas P-frames only contain the differences from pre ...

  • Axis Communications M3005-V - page 19

    AXIS M3005-V Network Camera Video The image Brightness can be adjusted in the range 0–1 00, where a higher value produces a brighter image. Increasing the Sharpness can increase bandwidth usage. A sharper image might increase image noise especially in low light conditions. A lower setting reduces image noise, but the whole image will appear less ...

  • Axis Communications M3005-V - page 20

    AXIS M3005-V Network Camera Video An overlay text can display the current date and time, or a text string. When using a text string, modiers can be used to display information such as the current bit rate or the current frame rate. For information about available modiers, see File Naming & Date/Time Formats in the online help . To enable ...

  • Axis Communications M3005-V - page 21

    AXIS M3005-V Network Camera Video 1. Go to Video > Overlay Image . 2. Select the image to use from the Use overlay image list and click Save . To display the overlay image: 1. Go to Video > Video Stream and select the Image tab . 2. Under Overlay Settings , select Include overlay image at the coordinates . 3. To control the image’s position ...

  • Axis Communications M3005-V - page 22

    AXIS M3005-V Network Camera Video Important Adding many privacy masks may affect the product’s performance. 22 ...

  • Axis Communications M3005-V - page 23

    AXIS M3005-V Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 18 . • Default Viewer for Browser . See page 23 . • Viewer Settings. See page ...

  • Axis Communications M3005-V - page 24

    AXIS M3005-V Network Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to the location specied in the AMC Control P anel. See AXIS Media Control (AMC) on page 13 . User Dened Links To display user-de ...

  • Axis Communications M3005-V - page 25

    AXIS M3005-V Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 19 . Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic positio ...

  • Axis Communications M3005-V - page 26

    AXIS M3005-V Network Camera PTZ (Pan Tilt Zoom) • Tilt control • Zoom control To disable specic controls, deselect the options under Enable/Disable controls . 26 ...

  • Axis Communications M3005-V - page 27

    AXIS M3005-V Network Camera Detectors Detectors Camera T ampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera T ampering . 2. Set ...

  • Axis Communications M3005-V - page 28

    AXIS M3005-V Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detectio ...

  • Axis Communications M3005-V - page 29

    AXIS M3005-V Network Camera Detectors Note • T o trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • T o avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high histor ...

  • Axis Communications M3005-V - page 30

    AXIS M3005-V Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, downlo ...

  • Axis Communications M3005-V - page 31

    AXIS M3005-V Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 3 1 ...

  • Axis Communications M3005-V - page 32

    AXIS M3005-V Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule. ...

  • Axis Communications M3005-V - page 33

    AXIS M3005-V Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 30 . • Detectors - Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page ...

  • Axis Communications M3005-V - page 34

    AXIS M3005-V Network Camera Events • Record Video – Record video to a selected storage. • Send Images – Send images to a recipient. • Send Notication – Send a notication message to a recipient. • Status LED – Flash the LED indicator . This can for example be used to validate triggers such as motion detection during product ins ...

  • Axis Communications M3005-V - page 35

    AXIS M3005-V Network Camera Events To set up an email recipient using one of the listed providers: 1. Go to Events > Recipients and click Add . 2. Enter a Name and select Email from the T ype list. 3. Enter the email addresses to send emails to in the To eld. Use commas to separate multiple addresses. 4. Select the email provider from the Pro ...

  • Axis Communications M3005-V - page 36

    AXIS M3005-V Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 36 . • To set up action rules, see page 32 . • To access recordings, see Recording List on page 36 . • To congure camera controlled storage, see Sto ...

  • Axis Communications M3005-V - page 37

    AXIS M3005-V Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Sele ...

  • Axis Communications M3005-V - page 38

    AXIS M3005-V Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may a ...

  • Axis Communications M3005-V - page 39

    AXIS M3005-V Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired pr ...

  • Axis Communications M3005-V - page 40

    AXIS M3005-V Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained. To install a self-signed certicate: 1. Go to Setup > System Options > Security > Ce ...

  • Axis Communications M3005-V - page 41

    AXIS M3005-V Network Camera System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > TCP/IP > Basic . DHCP (Dynamic Host Conguration Protocol) allows network administra ...

  • Axis Communications M3005-V - page 42

    AXIS M3005-V Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar . 6. Open a browser and type http://<IP address> in the Location/Address eld. For other methods of assigning the IP address, see the document Assign an IP Address and Access the Video Stream on Axis ...

  • Axis Communications M3005-V - page 43

    AXIS M3005-V Network Camera System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server . To m ...

  • Axis Communications M3005-V - page 44

    AXIS M3005-V Network Camera System Options Use manually selected NA T router - Select this option to manually select a NAT router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NA T routers on your network. If more than one router is found, the default router is selected. Al ...

  • Axis Communications M3005-V - page 45

    AXIS M3005-V Network Camera System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that ...

  • Axis Communications M3005-V - page 46

    AXIS M3005-V Network Camera System Options The Axis product supports microSD/microSDHC/microSDXC cards. The following SD card le systems are supported: • ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a th ...

  • Axis Communications M3005-V - page 47

    AXIS M3005-V Network Camera System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www .axis.com/products/cam_companion_software/suppor ...

  • Axis Communications M3005-V - page 48

    AXIS M3005-V Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 50 . System Overview To get an overview of the Axis product’s status and settings, ...

  • Axis Communications M3005-V - page 49

    AXIS M3005-V Network Camera System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a le, go to System Options > Advanced > File Upload . Uploaded les are accessed through http://<ip address>/local/<user>/<file name> where <user> ...

  • Axis Communications M3005-V - page 50

    AXIS M3005-V Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The cur ...

  • Axis Communications M3005-V - page 51

    AXIS M3005-V Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the insta ...

  • Axis Communications M3005-V - page 52

    AXIS M3005-V Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client Check ...

  • Axis Communications M3005-V - page 53

    AXIS M3005-V Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . To identify the source of the problem, check the System Log under System Options > Support > Logs & Repo ...

  • Axis Communications M3005-V - page 54

    AXIS M3005-V Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Model AXIS M3005–V Image sensor 1/2.7” progressive scan RGB CMOS Lens M12 mount, xed iris, megapixel resolution 2.8 mm, 1 18° horizontal angle of view , F2.8 V ertical angle of view: 65° Light sensitivity 1.5 - 1 00000 lux, ...

  • Axis Communications M3005-V - page 55

    AXIS M3005-V Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specications at www .axis.com ONVIF 1.0 2, specication available at www .onvif.org AXIS Video Hosting S ...

  • Axis Communications M3005-V - page 56

    AXIS M3005-V Network Camera T echnical Specifications Function/group Item Specications Casing IP42 water- and dust-resistant, IK08 impact-resistant polycarbonate/ABS casing Color: White NCS S 1 002-B For repainting instructions, contact your Axis partner P olycarbonate/ABS inner camera module with encapsulated electronics Memory 256 MB RAM, 128 ...

  • Axis Communications M3005-V - page 57

    AXIS M3005-V Network Camera T echnical Specifications • Using HTTPS may reduce frame rate, in particular if streaming Motion JPEG. • Heavy network utilization due to poor infrastructure. Bandwidth affected. • Viewing on poorly performing client computers lowers perceived performance. Frame rate affected. • Running multiple AXIS Camera Appl ...

  • Axis Communications M3005-V - page 58

    User Manual V er . M6.4 AXIS M3005-V Network Camera Date: April 20 15 © Axis Communications AB, 20 12 - 20 15 P art No. 63355 ...

Produzent Axis Communications Kategorie Security Camera

Dokumente, die wir vom Produzenten des Geräts Axis Communications M3005-V erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Axis Communications
- Bedienungsanleitungen M3005-V
- Produktkarten Axis Communications
- Informationsbroschüren
- oder Energieetiketten Axis Communications M3005-V
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Axis Communications M3005-V.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Axis Communications M3005-V, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Axis Communications M3005-V. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Axis Communications M3005-V ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Axis Communications M3005-V, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Axis Communications M3005-V hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Axis Communications M3005-V verständlich ist.

Eine gänzliche Bedienungsanleitung von Axis Communications sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Axis Communications M3005-V bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Axis Communications M3005-V befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Axis Communications M3005-V, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Axis Communications M3005-V - die uns die ersten Schritte während der Nutzung von Axis Communications M3005-V erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Axis Communications M3005-V hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Axis Communications M3005-V im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Axis Communications M3005-V?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Axis Communications M3005-V nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Axis Communications M3005-V hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)