Deutsch dropdown-ico

Bedienungsanleitung Kenwood KDC-BT40U

40 Seiten 1.18 mb
Download

Zur Seite of 40

Summary
  • Kenwood KDC-BT40U - page 1

    CD-RECEIVER KDC-BT40U KDC-BT30 INSTRUCTION MANUAL © B64-4535-00/00 (EW/E0) ...

  • Kenwood KDC-BT40U - page 2

    2 | KDC-BT40U/KDC-BT30 Con te nt s Before Use 3 Component names and functions 4 General operation 5 Before Using Common Operation F unction Setting Operation Music Disc/Audio F ile/iP od Operation 6 Basic Operation Play function All Random Music Search Music Search for iP od Alphabet Search My Playlist for iP od Audio F ile/ iPod Setting iPod Contr ...

  • Kenwood KDC-BT40U - page 3

    English | 3 Before Use 2 W ARNING T o prev ent injury or fire, tak e the following precautions: T o prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, ...

  • Kenwood KDC-BT40U - page 4

    1 Release button The f aceplate of th e unit can b e deta ched an d taken with yo u, helping to deter the f t. Re fer to <Removing the Faceplate> (page 1 9). 2 [SR C ] b u t t on T o tu rn on th i s u ni t a nd se lect the Sour c e . T o t urn of f this unit (press th e but ton at leas t 1 second) . 3 Disc slot Whe n i n sert ed a d i sc (l a ...

  • Kenwood KDC-BT40U - page 5

    F unction Setting Operation The basic operating procedur e for using this function is described below . The individual function items are cov ered in the operating procedur es. 1 Select the source Press the [SRC] button. F unction items vary from source to source. F or a list of the function items. Refer to <F unction I tem List> (Page 30). 2 ...

  • Kenwood KDC-BT40U - page 6

    6 | KDC-BT40U/KDC-BT30 Music Disc/ A udio Fi le/iP od Operation Basic Operation Playing Disc Insert a disc into the disc slot (label side up). When inserted, the source is switched automatically and a song starts playing. When a disc is inserted, the “IN” indicator lights up. Playing USB devic e or iPod (KDC-B T40U only) Connect a USB device or ...

  • Kenwood KDC-BT40U - page 7

    English | 7 F unction of KDC-BT40U with iPod All Random All songs in iPod ar e played at random. Press the [3] button f or at least 1 second. Pr essing the button toggles the setting between All random play on (“ ALL RANDOM”) and off (“RANDOM OFF”). Pr ess this button again cancels the Random play. ⁄ • The time required to turn on the a ...

  • Kenwood KDC-BT40U - page 8

    8 | KDC-BT40U/KDC-BT30 Music Disc/ A udio Fi le/iP od Operation F unction of KDC-BT40U with iPod Alphabet Search Y ou can select a song by alphabet. T his function searches songs whose name contain the specified character(s) in the list of the selected browse item (artist, album, etc.). 1 Enter Music Search mode Press the [ ] button. “SEARCH” i ...

  • Kenwood KDC-BT40U - page 9

    English | 9 F unction of KDC-BT40U Audio F ile/ iPod Setting Y ou can select following setting items. 1 Enter F unction Setting mode Press the [VOL] knob for at least 1 second. “FUNC TION” is displayed. 2 Select the func tion item T urn the [ VOL] knob and press it when the desired item is display ed. Select “SE TTINGS” > Function item. ...

  • Kenwood KDC-BT40U - page 10

    10 | KDC-BT40U/KDC-BT30 T uner Operation Basic Operation Selecting T uner source Press the [SRC] button. Select the “ TUNER ” display. Selecting the Receiving Band Press the [BAND ] button. Each time you press the button, the r eceiving band alternates between the FM1, F M2, FM3 and A M. Selecting the Receiving station Press the [ 4 ] or [ ¢ ] ...

  • Kenwood KDC-BT40U - page 11

    English | 11 4 Make a setting T urn the [ VOL] knob and press it when the desired item is display ed. When select “ AUT O MEMORY”: T urn the [ VOL] knob to select “ YES” , and then press the [VOL] k nob. When 6 stations that can be received are put in the memory, auto memory entr y closes. 5 Exit Function Setting mode Press the [ ] button f ...

  • Kenwood KDC-BT40U - page 12

    12 | KDC-BT40U/KDC-BT30 Operation of Hands-F ree Ph oning Connecting a Bluetooth Devic e Before use the Bluetooth devic e, you need to connect Bluetooth device to this unit. The following 3 steps procedur e is necessary. Step 1. Pairing (Registering from Bluetooth devices) T o make your Bluetooth device (cell-phone) usable with this unit, you need ...

  • Kenwood KDC-BT40U - page 13

    English | 13 3 Select the name Operation type Operation Move to the next phone number . T urn the [VOL] knob. Move to the next name. Press the [ 4 ] or [ ¢ ] button. 4 Make a call Press the [VOL] knob. ⁄ • T o use the Phone Book , it must be downloaded to this unit in advance. Refer to <Downloading the Phone Book> (page 22). • During s ...

  • Kenwood KDC-BT40U - page 14

    14 | KDC-BT40U/KDC-BT30 Speed Dialing (Preset Dial) 1 Select the number you want to recall from the memory Press the [1] – [6] button. 2 Make a call Press the [VOL] knob. ⁄ • Y ou need to register the preset dial number . Receiving a C all Answering a Phone C all Press the [VOL] knob. ⁄ • The following operations disconnect the line: - I ...

  • Kenwood KDC-BT40U - page 15

    English | 15 Aud io Adju st m en ts Audio Con trol Y ou can adjust following Audio C ontrol items. 1 Select the source Press the [SRC] button. Select the “ TUNER ”/“USB” or “iPod”/ “CD”/“ AUX” display. 2 Enter F unction Setting mode Press the [VOL] knob for at least 1 second. “FUNC TION” is displayed. 3 Select the func tion ...

  • Kenwood KDC-BT40U - page 16

    16 | KDC-BT40U/KDC-BT30 Display Settings Display Selec tion Changing displayed inf ormation on each source following . 1 Enter F unction Setting mode Press the [VOL] knob for at least 1 second. “FUNC TION” is displayed. 2 En ter Display Select mode T urn the [ VOL] knob and press it when the desired item is display ed. Select “DISP SELECT ” ...

  • Kenwood KDC-BT40U - page 17

    English | 17 Display Setting Y ou can select following Display Setting items. 1 Enter F unction Setting mode Press the [VOL] knob for at least 1 second. “FUNC TION” is displayed. 2 Select the func tion item T urn the [ VOL] knob and press it when the desired item is display ed. Select “SE TTINGS” > “DISPLA Y” > F unction item. Fun ...

  • Kenwood KDC-BT40U - page 18

    18 | KDC-BT40U/KDC-BT30 Othe r F unct ions Clock Adjustment 1 T urn on this unit. Press the [SRC] button. 2 Enter F unction Setting mode Press the [VOL] knob for at least 1 second. “FUNC TION” is displayed. 3 Cancelling “ TIME SYNC” mode T urn the [ VOL] knob and press it when the desired item is display ed. Select “SE TTINGS” > “C ...

  • Kenwood KDC-BT40U - page 19

    English | 19 “RUSSIAN SET” When this is set to ON, the following character strings are display ed in Russian. (Folder name/ F ile name/ Song title/ Ar tist name/ Album name) OFF/ON “P-OFF W AIT” Setting the timer to turn this unit’ s power OFF automatically when S tandby mode continues. U sing this setting can save the vehicle ’ s batt ...

  • Kenwood KDC-BT40U - page 20

    20 | KDC-BT40U/KDC-BT30 Bluetooth Setup Bluetooth Setup Y ou can select following Bluetooth Setup items. 1 Enter Bluetooth mode Press the [VOL] knob. “BT MODE” is displayed. 2 Enter F unction Setting mode Press the [VOL] knob for at least 1 second. “FUNC TION” is displayed. 3 Select the func tion item T urn the [ VOL] knob and it when the d ...

  • Kenwood KDC-BT40U - page 21

    English | 21 Registering Bluetooth Devic e (Pairing) T o make your Bluetooth device (cell-phone) usable with this unit, you need to reg ister it (pairing). Y ou can register up to 5 Bluet ooth devices to this unit. Registering from this unit 1 Select Bluetooth device registration mode F or how to select setup item, refer t o <Bluetooth Setup> ...

  • Kenwood KDC-BT40U - page 22

    22 | KDC-BT40U/KDC-BT30 Bluetooth Setup Registering PIN C ode By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Select PIN code edit mode F or how to select setup item, refer t o <Bluetooth Setup> (page 20). Select “SE TTINGS” > “DET AILED SET ” (“DET AIL SET ”) > “PIN CODE EDIT ...

  • Kenwood KDC-BT40U - page 23

    English | 23 Selecting the Bluetooth Device Y ou W ish to C onnect When 2 or more Bluetooth devices hav e already been register ed, you need to select the Bluetooth device you wish to use . 1 Select Bluetooth device selection mode F or how to select setup item, refer t o <Bluetooth Setup> (page 20). Select “SE TTINGS” > “PHONE SELECT ...

  • Kenwood KDC-BT40U - page 24

    24 | KDC-BT40U/KDC-BT30 Bluetooth Setup SMS (Short Message Ser vice) The SMS arrived at the cell-phone is displa yed on the receiver . A newly arrived message is displayed . ¤ • T o prevent car accidents, the driver should not read the SMS while driving. When a new message arriv es “SMS RECEIVED” (“NEW SMS”) is displayed. The display dis ...

  • Kenwood KDC-BT40U - page 25

    English | 25 ⁄ • If your voice cannot be recognized , a message is displayed. P ressing the [ VOL] k nob allows you to retry voice input. (page 37) Select “PB NAME CHK” (Play) 6 Press the [VOL] knob. Play the reg istered voice and r eturn to step 3. Select “PB NAME DEL ” (Delete) 6 Delete a voice tag Press the [VOL] knob. Exit Phone boo ...

  • Kenwood KDC-BT40U - page 26

    26 | KDC-BT40U/KDC-BT30 Basic Operation s of Remote Con trol General C ontrol Volume contr ol [VOL] button Sou rce se le c t [SR C ] b u t t on Vo l u m e r e d u ce [A TT] button “ A T T “ indic ator is blink s when th e at tenuator func tion is on. (K DC - BT40U only). When the bu t ton is press ed again, the volum e returns to the previ ous ...

  • Kenwood KDC-BT40U - page 27

    English | 27 Preparing the remote c ontrol unit Pull the battery sheet out from the remote contr ol unit to the direction of the arrow . Changing the battery of the remote control unit Use a commercially available button battery (CR2025). 1 I nser t something narrow like a paperclip into the hole and pull out the battery tray. Press Pull out 2 I ns ...

  • Kenwood KDC-BT40U - page 28

    28 | KDC-BT40U/KDC-BT30 Appendix About Audio file • Playable A udio file AAC-L C (.m4a), MP3 (.mp3), WM A (.wma) • Playable disc media CD-R/R W/ROM • Playable disc file f ormat ISO 9660 Level 1/2, Joliet, Romeo , Long file name. • Playable USB devic e (KDC-BT40U only) USB mass storage class • Playable USB devic e file system F A T16, F A ...

  • Kenwood KDC-BT40U - page 29

    English | 29 About the Cell-Phone This unit conforms to the following Bluet ooth specifications: Version Bluet ooth Standar d Ver . 2.0 Profile HFP (Hands Fr ee Pr ofile) OPP (Object Push Pr ofile) PBAP (Phone book Access P rofile) SYNC (Synchr onization Pr ofile) F or the cell-phones verified for compatibility , access the following URL: http://ww ...

  • Kenwood KDC-BT40U - page 30

    30 | KDC-BT40U/KDC-BT30 Appendix Function Item List In Standby 1st hierarchy 2nd hierarchy 3rd hierarchy Page “DISP SELECT” 16 “SETTINGS” “CL OCK” “CL OCK ADJUST” (“CL OCK ADJ”) 18 “TIME SYNC” “DISPLA Y” “DIMMER SET” 17 “TEXT SCROLL ” “BT DV C ST A TUS” (“DVC ST A TUS”) “INITIAL SET” “PRESET TYPE” ...

  • Kenwood KDC-BT40U - page 31

    English | 31 In Hands-Fr ee BT mode 1st hierarchy 2nd hierarchy 3rd hierarchy Page “DISP SELECT” 16 “SETTINGS” “PHONE SELECT” (“PHONE SEL ”) 20 “SMS DOWNL OAD” (“SMS DL ”) “SMS INBOX” “VOICE T AG ” “DET AILED SET” (“DET AIL SET”) “DEVICE REGIST” (“DVC REGIST”) “S-DVC SELECT” (“S-DVC SEL ”) “ ...

  • Kenwood KDC-BT40U - page 32

    32 | KDC-BT40U/KDC-BT30 Ac cessories / Installation P rocedure Ac cessories 1 ..........1 2 ..........2 Installation Proc edure 1. T o prevent shor t circuits, r emove the key from the ignition and disconnect the - terminal of the battery. 2. Mak e the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness ...

  • Kenwood KDC-BT40U - page 33

    English | 33 S TEE R I NG W HEE L R E MO TE I NPU T MUTE ANT . CONT P .CONT REMOTE CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 L R Con necting Wires to T erminals USB connector AUX input (Ster eo) Use the mini-plug cable which is stereo type and does not have any resistance. Battery wire ( Yellow) Ignition wire (Red) FM/AM antenna input (JASO) Antenna Cor ...

  • Kenwood KDC-BT40U - page 34

    34 | KDC-BT40U/KDC-BT30 Connector F unction Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power Connector A-4 Y ellow Battery A-5 Blue/White Power Control A-7 Red Ignition (AC C) A-8 Black Earth (Ground) Connection Speaker Connector B-1 Purple Rear Right (+) B-2 Purple/Black Rear R ight (–) B-3 Gray Fr ont Right (+) B-4 Gra ...

  • Kenwood KDC-BT40U - page 35

    English | 35 Installation /Removing the Un it Installation Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Removing the Hard Rubber F rame 1 Engage the catc ...

  • Kenwood KDC-BT40U - page 36

    36 | KDC-BT40U/KDC-BT30 T roubleshoot ing Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoof er . • Cannot set up the low pass filter . • No output from the subwoofer . ▲ • “SUBWOOFER SE T ”/(“SUB-W SE T ”) of <Audio Control> (page 15) is not set to ON. • Pre ...

  • Kenwood KDC-BT40U - page 37

    English | 37 The messages shown belo w display y our systems condition. TOC ERROR: • No disc has been loaded in the disc magazine. • The CD is quite dirt y. The CD is upside - down. The CD is scratched a lot. ERROR 05: The disc is unreadable . ERROR 77: The unit is malfunctioning for some r eason. ➪ Press the reset butt on on the unit. If the ...

  • Kenwood KDC-BT40U - page 38

    38 | KDC-BT40U/KDC-BT30 FM T uner Sec tion Fr equency Range (50 kH z Space) : 87.5 MHz – 108.0 MH z Usable Sensitivity (S/N = 26dB) : 1.0 V/75 Ω Quieting Sensitivity (DIN S/N = 46dB) : 2.5 V/75 Ω Fr equency Response (±3.0 dB) : 30 Hz – 15 kH z Signal to Noise Ratio (MONO) : 63 dB Stereo Separation (1 kHz) : 40 dB MW T uner S ection F ...

  • Kenwood KDC-BT40U - page 39

    English | 39 USB Interface (KDC-BT40U) USB Standard : USB1.1/ 2.0 (F ull Speed) File Syst em : F A T16/ 32 MP3 Decode : Compliant with MPEG-1/2 Audio Layer -3 WMA Decode : Compliant with Windows Media Audio AAC Decode : AAC-L C “ .m4a ” files Maximum Supply Current : 500 mA Bluetooth Section Version : Bluetooth Ver . 2.0 Certified Fr equency Ra ...

  • Kenwood KDC-BT40U - page 40

    F or T urkey Bu ürün 26891sayılı Resmi Gazete ’ de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Y önetmeliğe uygun olarak üretilmiştir . This product complies with Directive, Number 26891 regarding “REGULA TION ON THE RESTRICTION OF THE USE OF CERT AIN HAZARDOUS ...

Produzent Kenwood Kategorie Car Stereo System

Dokumente, die wir vom Produzenten des Geräts Kenwood KDC-BT40U erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Kenwood
- Bedienungsanleitungen KDC-BT40U
- Produktkarten Kenwood
- Informationsbroschüren
- oder Energieetiketten Kenwood KDC-BT40U
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Kenwood KDC-BT40U.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Kenwood KDC-BT40U, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Kenwood KDC-BT40U. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Kenwood KDC-BT40U ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Kenwood KDC-BT40U, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Kenwood KDC-BT40U hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Kenwood KDC-BT40U verständlich ist.

Eine gänzliche Bedienungsanleitung von Kenwood sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Kenwood KDC-BT40U bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Kenwood KDC-BT40U befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Kenwood KDC-BT40U, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Kenwood KDC-BT40U - die uns die ersten Schritte während der Nutzung von Kenwood KDC-BT40U erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Kenwood KDC-BT40U hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Kenwood KDC-BT40U im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Kenwood KDC-BT40U?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Kenwood KDC-BT40U nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Kenwood KDC-BT40U hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)