-
Harbor Freight Tools 92281 - page 1
2.5 HP CHIPPER/SHREDDER ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yright 2004 by Harbor F reight T ools ® . All rights reser v ed. No por tion of this manual or any artwork contained herein may be reproduced in any shape or form without the e xpress ...
-
Harbor Freight Tools 92281 - page 2
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this man ual f or the safety w ar nings and precautions , assembly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. K eep your in voice with this manual. Wr ite the inv oice number on the inside of the front cov er . K eep this manual and in voi ...
-
Harbor Freight Tools 92281 - page 3
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY 1. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding pr ong or modify the plug in any wa y . Do not use any ad ...
-
Harbor Freight Tools 92281 - page 4
2. Dress properl y . Do not wear loose clothing or je welry . Contain long hair . Keep y our hair , clothing, and glo ves awa y fr om moving parts. Loose clothes, je welr y , or long hair can be caught in mo ving par ts. 3. A v oid accidental star ting. Be sure the P o wer Switch is off bef ore plugging in. Plugging in power tools with the Power Sw ...
-
Harbor Freight Tools 92281 - page 5
any other condition that ma y affect the tool’ s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 7. Use only accessories that are recommended by the manufacturer for your model. Accessor ies that ma y be suitable f or one tool may become hazardous when used on another tool. SER V ...
-
Harbor Freight Tools 92281 - page 6
2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’ s grounding system and must ne ver be attached to an electr ically “live” terminal. (See Figure A.) 3. Y our tool m ust be plugged into an appropria ...
-
Harbor Freight Tools 92281 - page 7
FIGURE B SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 7 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable f or outdoor use. 7. Make sure your extension cord is properly wired and in good electrical condition. Always replace a dama ...
-
Harbor Freight Tools 92281 - page 8
SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 8 1. Maintain labels and nameplates on the Chipper/Shredder . These carr y impor tant information. If unreadable or missing, contact Harbor F reight T ools f or a replacement. 2. Use the right product f or the right job. There are cer tain applications f or which this product was ...
-
Harbor Freight Tools 92281 - page 9
14. Never leave the Chipper/Shredder unattended when it is plugged into an electrical outlet. T ur n off the machine, and unplug it from its electrical outlet. SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 9 12. Keep all electrical connections dry and off the ground. 13. Do not handle the Power Switch (47) with wet hands. 15. ...
-
Harbor Freight Tools 92281 - page 10
26. W ARNING! Some dust created b y pow er sanding, sawing, grinding, drill- ing, and other construction activities, contain chemicals known (to the State of Calif or nia) to cause cancer , bir th def ects or other reproductiv e har m. Some ex- amples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and ...
-
Harbor Freight Tools 92281 - page 11
SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 11 ASSEMBL Y INSTR UCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembl y Diagram on page 17 . W ARNING! Alw a ys make sure the P ow er Switch (47) of the Chipper/Shred- der is in its “OFF” position and the unit is u ...
-
Harbor Freight Tools 92281 - page 12
SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 12 3 . Attach the Right Suppor t Leg (35)) to the r ight side of the Motor Suppor t (26), using two Scre ws (27), two W ashers (34), and two Lock Nuts (33). (See Figure F .) 2 . Attach the Left Suppor t Leg (61) to the left side of the Motor Suppor t (26), using two Scre ws (27), ...
-
Harbor Freight Tools 92281 - page 13
SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 13 OPERA TING INSTR UCTIONS 1. W ARNING! Use safety equipment. Alw a ys wear ANSI approv ed saf ety impact glasses under an ANSI approv ed full f ace shield, ANSI approv ed hear ing and breathing protection, heavy duty work gloves, and nonskid safety shoes and work pants and wor ...
-
Harbor Freight Tools 92281 - page 14
and turn the Power Switch to its “ON” position to resume cutting. NEVER attempt to disable the Circuit Breaker . (See Figure H.) 11. NO TE: The Motor is equipped with a Saf ety Shut-Off Switch (42) located on the top portion of the Motor Support (26). Should the Motor not restart, check to make sure the Body (13) is firmly secured to the Motor ...
-
Harbor Freight Tools 92281 - page 15
INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Mak e sure the P ow er Switch (47) of the Chipper/Shredder is in its “OFF” position and that the machine is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 2. Before eac h use, inspect the general condition of the Chipper/Shredder . Ch ...
-
Harbor Freight Tools 92281 - page 16
P ARTS LIST SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 16 NOTE: Some parts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts. PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUT OR HAS PR O VIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS ...
-
Harbor Freight Tools 92281 - page 17
ASSEMBL Y DIA GRAM SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 17 NOTE: Some parts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts. 69: 5MM ALLEN WRENCH NO T SHO WN. 70: 6MM ALLEN WRENCH NO T SHO WN. 71: 13MM DOUBLE END WRENCH NOT SHOWN. 72: 16MM DOUBLE END WRE ...
-
Harbor Freight Tools 92281 - page 18
WIRING DIA GRAM SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 18 ...
Haben Sie eine Frage bezüglich Harbor Freight Tools 92281?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Harbor Freight Tools 92281 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Harbor Freight Tools 92281 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.