Bedienungsanleitung Xantech XVCS100IR

10 Seiten 0.52 mb
Download

Zur Seite of 10

Summary
  • Xantech XVCS100IR - page 1

    XVCD50 XVCD100 XVCD100IR XVCS50 XVCS100 XVCS100IR XVC50 XVC100 XVCO100 INST ALLA TION INSTRUCTIONS XANTECH VOLUME CONTROLS Installation Instructions XV Volume Controls Xantech’s premier product line of XV volume controls are in-wall mountable stereo speaker volu me control with impedance matching capability. From one to eight pairs or stereo spea ...

  • Xantech XVCS100IR - page 2

    XVCD50 XVCD100 XVCD100IR XVCS50 XVCS100 XVCS100IR XVC50 XVC100 XVCO100 INST ALLA TION INSTRUCTIONS XANTECH VOLUME CONTROLS Installation Instructions XVC Series Volume Controls Xantech’s premier product line of XV volume controls are in-wall mountable stereo speaker volu me control with impedance matching capability. From one to eight pairs or ste ...

  • Xantech XVCS100IR - page 3

    Installation Requirements You will need at the very least, a ⅛ ” slotted screwdriver, a ¼” slotted screwdriver, wire cu tters and wire strippers. The recommended speaker wire to be used is 16-gauge stranded copper speaker wire. For runs longer than 100 feet, we recommend 14-gauge stranded copper speaker wire. Never use solid-core wire such a ...

  • Xantech XVCS100IR - page 4

    Installation Requirements You will need at the very least, a ⅛ ” slotted screwdriver, a ¼” slotted screwdriver, wire cu tters and wire strippers. The recommended speaker wire to be used is 16-gauge stranded copper speaker wire. For runs longer than 100 feet, we recommend 14-gauge stranded copper speaker wire. Never use solid-core wire such a ...

  • Xantech XVCS100IR - page 5

    Example 1: Two pairs of 8 Ohm ceiling s peakers are to be used with two volume controls, all driven by a single amplifier rated for 8 Ohm minimum safe operating load impedance. 1) Refer to “CHART A”, 8 Ohm Minimum Amplifier. 2) In the first colu mn, find “8 Ohms”. 3) Follow the row to the ri ght until you find “2 PAIR”. 4) Follow the co ...

  • Xantech XVCS100IR - page 6

    CHART B: 4 Ohm M inimu m Ampl ifie r Example 1: Two pairs of 8 Ohm ceiling s peakers are to be used with two volume controls, all driven by a single amplifier rated for 8 Ohm minimum safe operating load impedance. 1) Refer to “CHART A”, 8 Ohm Minimum Amplifier. 2) In the first colu mn, find “8 Ohms”. 3) Follow the row to the ri ght until yo ...

  • Xantech XVCS100IR - page 7

    Multiple Zone, Single Speaker Pair Volume Control Application Single Zone, Single Speaker Pair Volume Control and IR Receiver Application Note: Applies to Model XVCD100IR, XVCS100IR only 9 8 1 234567 CB18 Left Right R+ R L L+ INPUT R+ R L L+ OUTPUT R+ R L L+ INPUT R+ R L L+ OUTPUT R+ R L L+ INPUT R+ R L L+ OUTPUT ...

  • Xantech XVCS100IR - page 8

    Multiple Zone, Single Speaker Pair Volume Control Application Single Zone, Single Speaker Pair Volume Control and IR Receiver Application Note: Applies to Model XVCD100IR, XVCS100IR only 9 8 1 234567 CB18 Left Right R+ R L L+ INPUT R+ R L L+ OUTPUT R+ R L L+ INPUT R+ R L L+ OUTPUT R+ R L L+ INPUT R+ R L L+ OUTPUT ...

  • Xantech XVCS100IR - page 9

    CB18 Connecting Block (not included) The CB18 provides a convenient way to parallel many wires onto a 4 conductor bus. You can easily connect many home run leads from volume controls to the output terminals of a main amplifier. The CB18 features the following: - Nine 4-terminal plug-in connectors on a 4-conductor bus. - One-in eight-out or eight-in ...

  • Xantech XVCS100IR - page 10

    CB18 Connecting Block (not included) The CB18 provides a convenient way to parallel many wires onto a 4 conductor bus. You can easily connect many home run leads from volume controls to the output terminals of a main amplifier. The CB18 features the following: - Nine 4-terminal plug-in connectors on a 4-conductor bus. - One-in eight-out or eight-in ...

Produzent Xantech Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts Xantech XVCS100IR erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Xantech
- Bedienungsanleitungen XVCS100IR
- Produktkarten Xantech
- Informationsbroschüren
- oder Energieetiketten Xantech XVCS100IR
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Xantech XVCS100IR.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Xantech XVCS100IR, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Xantech XVCS100IR. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Xantech XVCS100IR ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Xantech XVCS100IR, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Xantech XVCS100IR hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Xantech XVCS100IR verständlich ist.

Eine gänzliche Bedienungsanleitung von Xantech sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Xantech XVCS100IR bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Xantech XVCS100IR befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Xantech XVCS100IR, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Xantech XVCS100IR - die uns die ersten Schritte während der Nutzung von Xantech XVCS100IR erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Xantech XVCS100IR hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Xantech XVCS100IR im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Xantech XVCS100IR?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Xantech XVCS100IR nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Xantech XVCS100IR hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)