-
Patton electronic 1058 - page 1
USER MANUAL MODEL 1058 VLINK Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M1058-B Doc# 058091UB Revised 6/10/02 An ISO-9001Cer tified Company ...
-
Patton electronic 1058 - page 2
2 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference ............................................................ 3 1.2 CE Notice ...................................................................................... 3 1.3 FCC Part 68 (1058DV Only) ............................. ...
-
Patton electronic 1058 - page 3
3 1.0 W ARRANTY INFORMATION P atton Electronics warrants all Model 1058 components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment. This warranty is limited to def ects in w orkmanship or mater ials, and does not cov er customer damage, ab use or ...
-
Patton electronic 1058 - page 4
4 1.3 FCC PART 68 (1058DV ONLY) This equipment complies with P art 68 of the FCC Rules. Please note the f ollowing: 1. Y ou are required to request service from the telephone company bef ore you connect the Model 1058D V to a network. When you request ser vice, y ou must pro vide the telephone company with the f ollowing data. — The required Univ ...
-
Patton electronic 1058 - page 5
5 3. If your Model 1058D V causes harm to the telephone network, the telephone company ma y temporarily discontinue y our service. If possible , they will notify y ou in adv ance , but if adv ance notice is not practical, y ou will be notified as soon as possible and will be inf ormed of your right to file a complaint with the FCC. 4. If you e xp ...
-
Patton electronic 1058 - page 6
6 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor . If any questions or prob lems arise during installation or use of this product, contact P atton Electronics T echnical Suppor t at +1 (301) 975-1007. ...
-
Patton electronic 1058 - page 7
7 automatically add and delete MA C addresses , only passing pac k ets across the VDSL link that are meant for the remote peered LAN. Figure 1. T ypical application The 1058D V/CO and 1058D V/CP work together to create a transparent e xtension betw een tw o peered Ethernet LANs. PO TS/ISDN calls can be made ov er a VDSL link without interfering wit ...
-
Patton electronic 1058 - page 8
8 3.0 INSTALLATION Because the Model 1058 requires no configuration, it can be installed quickly . If you are installing a standalone unit, ref er to section 3.1 “Standal- one unit installation”. Otherwise, ref er to section 3.2 “Rac k card installation”. 3.1 STANDALONE UNIT INSTALLATION Do the f ollowing: 1. Connect the line interf ace be ...
-
Patton electronic 1058 - page 9
9 2. Secure the rear card using the supplied metal screws . 3. Slide the front card into the chassis until you f eel resistance as the front card engages the rear card. When that happens , gently push the front card f orw ard until it is fully seated in the card-edge recepta- cle of the rear card (it should click into place). 4. Secure the front ca ...
-
Patton electronic 1058 - page 10
10 3.3 CONNECTING THE T WISTED-PAIR LINE INTERFACE The Model 1058 suppor ts communication between two peer Ethernet LAN sites ov er a distance of up to 4,652 ft (1,418 m) ov er 24 AWG (0.5 mm) twisted-pair wire. Note Actual distance and link performance ma y vary depending on the environment and type/gauge of wire used. F ollow the steps belo w to ...
-
Patton electronic 1058 - page 11
11 Figure 5. Model 1058D (T er minal Block) twisted pair line interface . 3.4 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE The shielded RJ-45 por t labeled Ethernet is the 10/100Base-T interf ace . This por t is designed to connect directly to a 10/100Base-T network. Figure 6 shows the signal/pin relationships on this interf ace . Y ou may connec ...
-
Patton electronic 1058 - page 12
12 straight-through RJ-45 cab le. Figure 7 diagrams the cab le wiring for con- necting the Model 1058 to a 10/100Base-T hub . Figure 7. Wiring diagram for connecting the Model 1058 to a 10/100Base-T hub Connecting the 10/100Base-T Ethernet P ort to a PC (DTE) The Model 1058 10/100Base-T interf ace is configured as DTE (Data T er- minal Equipment). ...
-
Patton electronic 1058 - page 13
13 work. The RJ-45 connector in the model 1058’ s PO TS/ISDN interface is wired as shown in Figure 9. Figure 9. Model 1058D V (RJ-45) POTS/ISDN interf ace 3.6 CONNECTING POWER An e xternal AC or DC pow er supply is av ailab le separately . This connec- tion is made via the barrel jack on the rear panel of the Model 1058. No configuration is nece ...
-
Patton electronic 1058 - page 14
14 4.0 OPERATION Once the Model 1058s are properly installed, they should operate trans- parently . No user settings required. This section describes reading the LED status monitors. 4.1 POWER UP Bef ore applying power to the Model 1058, please re view section 3.6, “Connecting P ower” on page 13 to v erify that the unit is connected to the appr ...
-
Patton electronic 1058 - page 15
15 Figure 11. Model 1058 rack card front panel T able 1: F ront panel LED description LED Description P ower Solid GREEN to indicate the unit is powered on. VLINK Link (Active Green) Solid g reen (ON) to indicate that the end-to-end VDSL link between the Model 1058s is established. The VLINK LED is OFF when the link is down. VLINK QOL (Active Y ell ...
-
Patton electronic 1058 - page 16
16 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Shielded RJ-45, 10/100Base-T , IEEE 802.3 Ethernet • VDSL Connection: RJ-45 and T er minal Block A.2 T RANSMISSION LINE T wo-wire unconditioned twisted pair. A.3 VDSL LINE RATE 12.5 Mbps, symmetric upstream/downstream. A.4 ACTUAL DATA RATE 10 Mbps, symmetric upstream/downstream. A.5 VDSL DISTANC ...
-
Patton electronic 1058 - page 17
17 APPENDIX B MODEL 1058 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSORIES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 1058DRC/CO CO VDSL Rack Card; data only 1058DRC/CP CP VDSL Rack Card; data only 1058D VRC/CO CO VDSL Rack Card; v oice and data 1058D VRC/CP CP VDSL Rack Card; v oice and data ...
-
Patton electronic 1058 - page 18
18 ...
-
Patton electronic 1058 - page 19
19 APPENDIX C MODEL 1058 SERIES INTERF ACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.2 VDSL INTERFACE RJ-45 • Pin 4: RING • Pin 5: TIP • Pins 1, 2, 3, 6, 7, 8: no connection T erminal Block See Figure 5 on page 11. C.3 POTS/ISDN INTERFACE RJ ...
-
Patton electronic 1058 - page 20
20 Cop yright © 2001, 2002 P atton Electronics Company All Rights Reser ved. ...
Haben Sie eine Frage bezüglich Patton electronic 1058?
Nutzen Sie das untere Formular
Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Patton electronic 1058 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Patton electronic 1058 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.