Bedienungsanleitung Emerson CF930ORB01

20 Seiten 5.24 mb
Download

Zur Seite of 20

Summary
  • Emerson CF930ORB01 - page 1

    1 1 1 -1 1 ...

  • Emerson CF930ORB01 - page 2

    YL ...

  • Emerson CF930ORB01 - page 3

    Supplied l. T wo 60-watt candelabra bulbs ...

  • Emerson CF930ORB01 - page 4

    k l ...

  • Emerson CF930ORB01 - page 5

    5 Y our new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds. General Y our Emerson ceiling fan comes supplied with a Fan/Light W all Control which consists of a wall control (transmitter) and a remote ...

  • Emerson CF930ORB01 - page 6

    6 1. Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the clevis pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 5. 2. Loosen setscrew in motor coupling if necessary . Separate, untwist and unkink the three ...

  • Emerson CF930ORB01 - page 7

    ...

  • Emerson CF930ORB01 - page 8

    ...

  • Emerson CF930ORB01 - page 9

    9 2. Carefully lift the fan and seat the hanger ball/downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 12). Be sure the groove in the ball is lined up with the tab on the hanger bracket (Figure 1 1). Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until brack ...

  • Emerson CF930ORB01 - page 10

    10 SW101 F AN/LIGHT WALL CONTROL (SUPPLIED) BLACK BLACK WHITE RED BLACK WHITE HANGER BALL GREEN WIRE (GROUND) FROM HANGER BALL AND HANGER BRACKET TWO-CONDUCTOR CABLE (WITH GROUND) BLACK (HOT) WHITE GROUND TO 120- VOL T SUPPL Y WHITE BLUE WHITE BLUE EMERSON ® HI MED LOW FAN OFF LIGHT ON OFF Figure 14 Check to see that all connections are tight, inc ...

  • Emerson CF930ORB01 - page 11

    ...

  • Emerson CF930ORB01 - page 12

    Do not connect any neutral (white) wire to this control. Incorrect wiring will damage this control. ! W ARNING 12 Installation of W all Control SINGLE-POLE INST ALLA TION (Figure 19) 1. Disconnect power at circuit breaker or remove fuse. 2. Remove faceplate and screws from existing wall control. Pull control out from the wall box. Determine the “ ...

  • Emerson CF930ORB01 - page 13

    5. Connect one black wire of the wall control to both remaining traveler wires in the wall box and secure with wire connector supplied. NOTE: Retrofit 3-way installations are likely to include two traveler wires between the two wall boxes. In new construction, only one traveler wire Is required. 3-WA Y WIRlNG DIAGRAM: NEW CONSTRUCTION 6. Place wall ...

  • Emerson CF930ORB01 - page 14

    14 ST ANDARD WIRING FOR EXISTING 3-WA Y CONTROL: HOT BLK F AN/LIGHT WALL CONTROL BLK TRA VELER WIRES BLK BLK BLACK LOAD BLACK LOAD TRA VELER WIRES HOT BLK EXISTING WALL CONTROL EMERSON ® EMERSON ® HI MED LOW FAN OFF LIGHT ON OFF HI MED LOW FAN OFF LIGHT ON OFF Figure 22 Operating Y our Ceiling Fan IMPORT ANT Fan installation must be completed, in ...

  • Emerson CF930ORB01 - page 15

    1. Downrod Extension Kits (see store or catalog). 2. Ceiling Fan Controls (see store or catalog). 3. Blades (see store or catalog). 15 Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock. ! W ARNING The use of any other control not specifically approved for this ...

  • Emerson CF930ORB01 - page 16

    ...

  • Emerson CF930ORB01 - page 17

    -1 -1 -1 762670-5 762670-5 762670-5 ...

  • Emerson CF930ORB01 - page 18

    18 T rouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Fuse or circuit breaker 1. Check main and branch start. blown. circuit fuses or circuit breakers. W ARNING: Make sure main power is turned off. 2. Loose power line 2. Check line power connections connections to the fan. to fan. 3. Fan/Light W all Control is OFF. 3. T ur ...

  • Emerson CF930ORB01 - page 19

    19 LIMITED WARRANTY What The W ar ranty Covers: This warranty covers the motor and the other components and accessories of your Emerson Electric Co. ceiling fan against all defects in workmanship and materials. Y ou must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: As it applies to the motor , this ...

  • Emerson CF930ORB01 - page 20

    -1 1 ...

Produzent Emerson Kategorie Fan

Dokumente, die wir vom Produzenten des Geräts Emerson CF930ORB01 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Emerson
- Bedienungsanleitungen CF930ORB01
- Produktkarten Emerson
- Informationsbroschüren
- oder Energieetiketten Emerson CF930ORB01
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Emerson CF930ORB01.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Emerson CF930ORB01, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Emerson CF930ORB01. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Emerson CF930ORB01 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Emerson CF930ORB01, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Emerson CF930ORB01 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Emerson CF930ORB01 verständlich ist.

Eine gänzliche Bedienungsanleitung von Emerson sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Emerson CF930ORB01 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Emerson CF930ORB01 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Emerson CF930ORB01, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Emerson CF930ORB01 - die uns die ersten Schritte während der Nutzung von Emerson CF930ORB01 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Emerson CF930ORB01 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Emerson CF930ORB01 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Emerson CF930ORB01?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Emerson CF930ORB01 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Emerson CF930ORB01 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)