-
StarTech.com NETRS2321EEU - page 1
Manual Revision: 02/14/2012 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.co ...
-
StarTech.com NETRS2321EEU - page 2
Instruction Manual FCC C ompliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment genera tes, uses and can radiate rad ...
-
StarTech.com NETRS2321EEU - page 3
Instruction Manual i T able of C ontents Introduction ............................................................................................ 1 Packaging Conten ts ................................................................................................................................. 1 System Requirements ............................. ...
-
StarTech.com NETRS2321EEU - page 4
Instruction Manual 1 Introduction The NETRS23 21E 1 Port R S-232/4 22/485 Serial ove r IP E thernet Devic e Server is th e idea l solu tion f or r emote ly con troll ing se rial d evices ove r you r LAN/ W AN or even the in ternet . F eaturi ng use r-frie ndly b rows er-bas ed co ngura tion of netw ork se ttings , seri al port line sett ings, UA ...
-
StarTech.com NETRS2321EEU - page 5
Instruction Manual 2 T op V iew Left Side View Right Side View *actual product may vary from photos ...
-
StarTech.com NETRS2321EEU - page 6
Instruction Manual 3 LED Indicators • PWR (Green) - P ower indicator • Data (Red) - Data sent and receiv ed indicator • 10 / 10 0 ( G r ee n) - N e tw o rk si g na l i n di c at o r . Wh en i ll um i na t ed , n et w or k co nn ec ti o n is p r es e nt . • LED (Red) - Device status indicator . When operating under normal status ...
-
StarTech.com NETRS2321EEU - page 7
Instruction Manual 4 Installation Device Management Utility The Devic e Manag ement Utility that is inc luded with N ETRS2321 E (ETM. exe) is use d to det ect and setup the in stalle d adap ter . When this tool is ins talled and act ivate d, it will det ect the exist ence of the instal led ad apter , and depict its st atus includi ng IP Addr ess, S ...
-
StarTech.com NETRS2321EEU - page 8
Instruction Manual 5 T o refresh the status of the adapter network connection, click ‘R efr esh’ on the lower right corner . This shold be per formed follo wing any conguration changes. T o congure the IP address assigned to NETRS2321E, left click on the available device, then a window would pop up . Assign an IP Address with with the sam ...
-
StarTech.com NETRS2321EEU - page 9
Instruction Manual 6 NOTE: Because the Device Management Utility uses broadcast UDP packets, conguration is only allowed when the devic e’ s password is left empty. W eb Console C onguration In addition to basic IP Address and subnet mask, specic device settings can be set using an Internet browser , such as I nternet Explor er or Netsca ...
-
StarTech.com NETRS2321EEU - page 10
Instruction Manual 7 The Setup Page Once the correct password has been ent ered in the Setup Login password eld, click on Login to ent er the Setup Page, which oers advanced c ongurability. The elements that can be congured are as f ollows: IP Address Allows you to modify the assig ned IP Address of the adapter . Do not enter a value th ...
-
StarTech.com NETRS2321EEU - page 11
Instruction Manual 8 Network link speed This eld indicates the Ethernet phy sical link speed. “ Auto” indicates that the speed has automatically been assigned by the NETRS2321E adapter . Y ou can also specify 10Mbps or 100Mbps, depending on the speed of the hub to which the adapter is connected. DHCP client This eld will indicate either e ...
-
StarTech.com NETRS2321EEU - page 12
Instruction Manual 9 • Serial I/O Interface: RS-232: T xD, RxD f or data stream, no ow control RS-232 (RTS/CTS): T xD , RxD for data stream, RTS/CTS for ow control RS-232 (RTS/CTS, DTR/DSR): T xD, RxD for data str eam, R TS/CTS for ow con trol. DTR f or socket status, DSR for socket open/close control RS-485 (Half duplex): Half duplex ...
-
StarTech.com NETRS2321EEU - page 13
Instruction Manual 10 Contr oller Update Once you hav e entered the necessary parameters, press the Update button. NETRS2321E will save all parameters in internal non-v olatile memor y and then reboot. It will take roughly 5 or 10 seconds to complete the whole proc ess following which a new login page will be presented , indicating that the Control ...
-
StarTech.com NETRS2321EEU - page 14
Instruction Manual 11 3. Right-click on the blank window and select the option to “ Add Port” . 4. In t he “ Ad d Po rt ” wi ndow , si mply c lick t he OK button . Y ou cho ose t o manu ally se lect a CO M port n umber or hav e Wind ows m anage it. F urther c ongur ation will occur later . 5. Window s may prompt you for permission to ins ...
-
StarTech.com NETRS2321EEU - page 15
Instruction Manual 12 port should also be visible in the Windo ws Device Manager. 7. Right-click on the COM port in the virtual COM software and select “ Add Net ” . ...
-
StarTech.com NETRS2321EEU - page 16
Instruction Manual 13 8. The “ Add Net” window will allow you to congur e the COM port to the settings used by the NETRS2321E unit you wish to associate with. Select the proper operating mode, network settings used to congure the NETRS2321E unit previously (see Web Console Conguration). F actor y Default Setting If you forget the setup ...
-
StarTech.com NETRS2321EEU - page 17
Instruction Manual 14 Self- T esting Hyper T erminal for TCP/IP WinSock After completing the wiring and parameter settings, it is advisable to c onrm that all settings are correct. T o use a single computer to test if NETRS2321E is per forming properly: 1. Initiate a Hyper T erminal from the Start Menu in W indows. This can be done by clicking o ...
-
StarTech.com NETRS2321EEU - page 18
Instruction Manual 15 Once the necessary settings have been made, click on OK. The Hyper T erminal window will appear - if all settings are correct, the time clock at the lower left corner of the terminal window will indicate “ connected” and the hh:mm:ss timer will begin counting. Hyper T erminal for C OM Port Initiate another Hyper T erminal ...
-
StarTech.com NETRS2321EEU - page 19
Instruction Manual 16 Specications Connectors 1 x DB9 male 1 x 4-wire T erminal Block 1 x RJ45 Ethernet female 1 x DC Pow er LEDs Pow er , Data, LAN Link , Sy stem Supported Serial Protocol RS232/422/485 Ethernet Link Speed 10/100 Mbps Maximum Data T ransfer Rate 115.2 Kbps Pow er Adapter 9VDC, 500mA, type M plug Operating T emp er ature 0°C ~ ...
-
StarTech.com NETRS2321EEU - page 20
Instruction Manual 17 T echnical Suppor t StarT ech.com’ s lifetime technical suppor t is an integral part of our commitmen t to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensiv e selection of online tools, documentation, and downloads. For the la test drivers/ ...
-
StarTech.com NETRS2321EEU - page 21
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one -stop source for ever y connectivity par t you need. From the latest technology t o legac y pr oduc ts — and all the par ts that bridge the old and new — we can help you nd the parts that connect your solutions. We make it easy t ...
¿Tienes una pregunta acerca de StarTech.com NETRS2321EEU?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con StarTech.com NETRS2321EEU, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con StarTech.com NETRS2321EEU probablemente compartirá una forma de solucionarlo.