-
Vivitek D795WT - page 1
D7 Series U s e r M a n u a l 用戶手冊 用户手 册 M a n u a l d e l u s u a r i o M a n u e l d e l ' u t i l i s a t e u r B e n u t z e r h a n d b u c h 사 용 자 설 명 서 Р у к о в о д ст в о п о ль з о в ат е л я G e b r u i k e r s h a n d l e i d i n g I n s t r u k c j a o b s ł u g i U ž i v a t e ...
-
Vivitek D795WT - page 2
Copyright This publication, including all photographs, illustratio ns and software, is protected under international copy- right laws, with all rights reserved. Neither this man ual, nor any of the material contained herein, may be reproduced without written consent of the autho r. © Copyright 2010 Disclaimer The information in this document is su ...
-
Vivitek D795WT - page 3
DLP Projector – User’s Manual — ii — Important Safety Information Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector. Keep this manual for future reference. Symbols Used Warning symbo ...
-
Vivitek D795WT - page 4
Preface Projector Installation Notice ¾ Place the projector in a horizontal p osition The tilt angle of the projector should not excee d 15 degrees, nor should the p rojector be installed in any way other than the desktop and ceiling mou nt, ot herwise lamp life could decrease dramatically. ¾ Allow at least 50 cm clearance around th e exhaust ven ...
-
Vivitek D795WT - page 5
DLP Projector – User’s Manual Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the powe r cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control whe n storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can b e hazar ...
-
Vivitek D795WT - page 6
Preface – v – Main Features • Lightweight unit, easy to p ack away and transport. • Compatible with all m ajor video stan dards including NTSC, P AL, and SECAM. • A high brightness rating allows for presentations in daylight or in lit rooms. • Supports resolutions up to UXGA at 16.7 million colors to deliver crisp, clear im ages. • Fl ...
-
Vivitek D795WT - page 7
DLP Projector – User’s Manual — vi — Table of Contents GETTING STARTED .......................................................................................................................................................... 1 P ACKING C HECKLIST .............................................................................................. ...
-
Vivitek D795WT - page 8
Preface – vii – LED E RROR M ESSAGES ..................................................................................................................................................... 46 I MAGE P ROBLEMS ........................................................................................................................................... ...
-
Vivitek D795WT - page 9
DLP Projector – User’s Manual – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and che ck that the following items are included: DLP P RO JECTOR R EMOTE CONTROL (WITH TWO AAA BATTERIES) VGA CABLE P OWER CORD CD-ROM (T HIS U SER ’ S MANUAL ) Q UICK S TART C ARD W ARRANTY C AR D Contact your dealer immed iately if an ...
-
Vivitek D795WT - page 10
DLP Projector – User’s Manual Views of Projector Parts Front-right View 1 2 3 4 5 6 I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. Lamp cover Removes cover to re place lamp or color wheel 2. Kensington lo ck Secure to permanent obj ect wi th a Kensington® Lock system 44 3. Security bar For security and authorized usage 4. Lens Projection Lens 5. As ...
-
Vivitek D795WT - page 11
DLP Projector – User’s Manual Rear view 1 2 3 4 5 6 7 8 9 12 1 1 1 0 I TEM L ABEL D ESCRIPTIO N S EE PAGE : Connect the RGB CABLE to a disp lay (Loop Thru only for VGA IN-1 ) 1. VGA OUT 2. RS-232 Connect RS-232 serial po rt cable for remote con trol Connect the RGB CABLE from a computer and component s 3. VGA – 1 Connect the RGB CABLE from a ...
-
Vivitek D795WT - page 12
DLP Projector – User’s Manual Bottom view 70.00 1 10.00 126.00 228.00 20.00 56.00 146.00 236.00 100.0 240.0 1 2 3 3 3 2 I TEM L ABEL D ESCRIPTION S EE PAGE : 44 1. Security bar Helps protect t he projector f rom unaut horized use 2. Tilt adjustors Rotate adjusters lever to adjust angle position 3. Ceiling support ho les Contact your dealer for ...
-
Vivitek D795WT - page 13
DLP Projector – User’s Manual Remote Control Par ts Important: 1. Avoid using the projector with bright fluoresc ent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the re mote control and the proj ector. If the path be- tween the remote control ...
-
Vivitek D795WT - page 14
DLP Projector – User’s Manual – 6 – I TEM L ABEL D ESCRIPTIO N S EE PAGE : 1. IR transmitter Transmit s signals t o projector 2. Status LED Lights when th e remote control i s used 3. Laser Press to operate the on-screen pointer 4. Up Up arrow whe n connect ed through USB to a PC 5. Right Right ar row when co nn ected through USB to a PC 6. ...
-
Vivitek D795WT - page 15
DLP Projector – User’s Manual – 7 – Remote Control Operating Range The remote control uses infrared transmission to cont rol the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the re mote will function well within ...
-
Vivitek D795WT - page 16
DLP Projector – User’s Manual S ETUP AND O PERATION Inserting the Remote Control Batteries – 8 – 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow. 2. Insert the battery with the positive side facing up. 3. Replace the cover. Caution: 1. Only use AAA batteries (Alkaline batteries are recommended). 2. ...
-
Vivitek D795WT - page 17
DLP Projector – User’s Manual – 9 – Connecting Input Devices A PC or note book computer and video devices can be connected to the projector at the same time. Video devices include DVD , VCD, and VHS players, as we ll as m ovie camc orders and di gital sti ll cam eras. Check the user manu al of the connectin g device to confirm it has the ap ...
-
Vivitek D795WT - page 18
DLP Projector – User’s Manual – 10 – I TEM L ABEL D ESCRIPTIO N K AUDIO IN Connect an au dio cable fr om the input device L AUDIO OUT Connect an a udio cable from the outp ut device ！ Warning: As a safety precaution, disconnect all power to the projector and connecti ng devices before making connections. ...
-
Vivitek D795WT - page 19
DLP Projector – User’s Manual – 11 – Starting and Shutting down t he Projec tor 1. Connect the power cord to the projector. Connect the other end to a wall outlet. The POWER LED on the projector light. 2. Turn on the connected devices. 3. Ensure the POWER LED displays a solid orange. Then press the POWER button of the remote to turn on the ...
-
Vivitek D795WT - page 20
DLP Projector – User’s Manual – 12 – 5. When the “Power Off? /Press Power again” message appears, press the POWER button. The projector turns off. Caution: Do not unplug the power cord until the POWE R LED change to orange–indicating the projector has cooled down. ...
-
Vivitek D795WT - page 21
DLP Projector – User’s Manual – 13 – Setting an Access Password (Security L ock) You can use the four (arrow) buttons to set a password and pr event un authorized use of the projector. When enabled, the password must be entered after you p ower on the projector. (See Navigating the OSD on page 18 and Setting the OSD Language on page 19 for ...
-
Vivitek D795WT - page 22
DLP Projector – User’s Manual 5. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password. Push the MENU button to exit the dialog box. 6. The password co ...
-
Vivitek D795WT - page 23
DLP Projector – User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector t able or stand should be level and sturdy . • Position the projector so that it is perpendicular t o the screen. • Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection angl ...
-
Vivitek D795WT - page 24
DLP Projector – User’s Manual Adjusting the Keystone 1. V olume + - Use the KEYSTONE buttons the remote control to correct image-trapezoid (wider top or bottom) effect. 2. The keystone control appears on the display. – 16 – ...
-
Vivitek D795WT - page 25
DLP Projector – User’s Manual – 17 – Adjusting the Volume 1. Press the Volume +/- buttons on the remote control. The volume control appears on the display. V olume + - 2. Press the MUTE button to turn off the volume ...
-
Vivitek D795WT - page 26
DLP Projector – User’s Manual O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control curs or buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The followi ...
-
Vivitek D795WT - page 27
DLP Projector – User’s Manual Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Installation I. 2. Press the cursor ▲▼ button until Language is highlighted. 3. Press the cursor ◄► button until the language you want is highlighted. ...
-
Vivitek D795WT - page 28
DLP Projector – User’s Manual OSD Menu Overview Use the following illustration to quickly find a se tting or determine the range for a setting. Image Brightness Contrast Sharpness PC, MAC, Video, Chart, B&W Computer Horizont al Positio n Vertical Position Frequency Tracking Auto Image Installation I Blank Screen Black, Re d, Green, Blue, Wh ...
-
Vivitek D795WT - page 29
DLP Projector – User’s Manual OSD Sub-Menu Overvie w – 21 – ...
-
Vivitek D795WT - page 30
DLP Projector – User’s Manual Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu . Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Display Mode Press the cursor ◄► button to set the Display Mode. ...
-
Vivitek D795WT - page 31
DLP Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ► . Press ▼▲ to move up and down in the Advanced menu. I TEM D ESCRIPTIO N Press the cursor ◄► button to adju st the color space. (Range: A ...
-
Vivitek D795WT - page 32
DLP Projector – User’s Manual Color Manager (Enter) / ► to enter the Color Manager sub menu. Press I TEM D ESCRIPTIO N Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Red Select to enter the Green Col or Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Green Se ...
-
Vivitek D795WT - page 33
DLP Projector – User’s Manual Computer Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Com- puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Horizontal Position Press the cursor ◄► button to adju ...
-
Vivitek D795WT - page 34
DLP Projector – User’s Manual Video/Audio Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Video AGC Press the ◄► buttons to enabl e or di ...
-
Vivitek D795WT - page 35
DLP Projector – User’s Manual Audio (Enter) / ► to enter the Audio sub menu. Press I TEM D ESCRIPTIO N Volume Press the ◄► buttons to adju st the audi o volum e. Mute Press the ◄► buttons t o turn on o r off the s peaker. Press the cursor ◄► button to select audio input. (Range: Mini ~ RCA) Audio In put – 27 – ...
-
Vivitek D795WT - page 36
DLP Projector – User’s Manual Installation I Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄► to change values for settings. I TEM D ESCRIPTIO N Language Press the cursor ◄► button ...
-
Vivitek D795WT - page 37
DLP Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation I menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu. Press ◄► to change values for setting. I TEM D ESCRIPTIO N Security Lock Pr ...
-
Vivitek D795WT - page 38
DLP Projector – User’s Manual Installation II Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu. I TEM D ESCRIPTIO N Auto Source Press the cursor ◄► button to enab le or disable automati c sourc ...
-
Vivitek D795WT - page 39
DLP Projector – User’s Manual – 31 – Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu. Press ◄► to change values for setting. I TEM D ESCRIPTIO N OSD ...
-
Vivitek D795WT - page 40
DLP Projector – User’s Manual OSD Menu Setting I TEM D ESCRIPTIO N Menu Position Press ◄► button to select diffe rent OSD locati on. Translucent Menu Press ◄► butt on to select O SD backgrou nd translucent l evel. Menu Disp lay Press ◄► button to select O SD timeout delay. Peripheral Test I TEM D ESCRIPTIO N Remote Control Test Pres ...
-
Vivitek D795WT - page 41
DLP Projector – User’s Manual – 33 – Lamp Hour Reset Please refer to Resetting the Lamp on page 42 to reset the lamp hour count er. 3D I TEM D ESCRIPTIO N 3D Press ◄► to select Off, DLP-Link or IR. 3D Sync In vert Press ◄► to turn 3D Sy nc Invert O n or Off. ...
-
Vivitek D795WT - page 42
DLP Projector – User’s Manual Network I TEM D ESCRIPTIO N Network State Displays the network conn ection status. Press ◄► to turn DHCP On or Off. DHCP Note: If you select DHCP Off, complete the IP Address, Subnet Mask , Gateway, and DNS fields. IP Address Enter a valid IP a ddress if DHCP is turned off. Subnet Mask Enter a valid Subnet Mask ...
-
Vivitek D795WT - page 43
DLP Projector – User’s Manual For simplicity and ease of operation, the proj ector provides diverse networking and rem ote management features. The LAN/RJ45 function of the pr ojector through a network, such as remotely manage: Power On/Off, Brightness and Contra st settings. Also, projector stat us inform ation, such as: Video-Source, Sound-Mu ...
-
Vivitek D795WT - page 44
DLP Projector – User’s Manual 3. Right-click on Local Area Connection , and select Properties . 4. In the Properties window, select the General tab, an d select Internet Protocol (TCP/IP) . 5. Click Properties . 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK . – 36 – ...
-
Vivitek D795WT - page 45
DLP Projector – User’s Manual 7. Press the Menu button on the projector. 8. Select Installation II → Advanced → Ne twork . 9. After getting into Net work , input the following: ` DHCP: Off ` IP Address: 10.10.10.10 ` Subnet Mask: 255.255.255.0 ` Gateway: 0.0.0.0 ` DNS Server: 0.0.0.0 10. Press (Enter) / ► to confirm settings. Open a web b ...
-
Vivitek D795WT - page 46
DLP Projector – User’s Manual C ATEGORY I TEM I NPUT -L ENGTH IP Address 14 – 38 – IP ID 2 Crestron Control Port 5 Projector Name 10 Location 9 Projector Assigned To 8 DHCP (Ena bled) (N/A) IP Address 15 Subnet Mas k 15 Network C onfigurati on Default Gateway 15 DNS Server 15 Enabled (N/A) New Password 15 User Password Confirm 15 Enabled (N ...
-
Vivitek D795WT - page 47
DLP Projector – User’s Manual Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory Reset sub menu and press (Enter) / ► to reset all the menu items to the factory default values (expect Language and Security Lock). Status Press the cursor ▲▼ button to move up and down in the Inst ...
-
Vivitek D795WT - page 48
DLP Projector – User’s Manual – 40 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in this produc t contains a small amount of ...
-
Vivitek D795WT - page 49
DLP Projector – User’s Manual 3. Remove the two screws from the lamp module. 4. Lift the module handle up. 5. Pull firmly on the module handle to remove the lamp module. 6. Reverse steps 1 to 5 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module ...
-
Vivitek D795WT - page 50
DLP Projector – User’s Manual – 42 – Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the cursor ŻŹ button to move to the Installation II menu. Press the cursor button to move down to Advanced . 3. Press the cursor ? ...
-
Vivitek D795WT - page 51
DLP Projector – User’s Manual – 43 – Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. 2. Use only a dampened cloth when cleaning. Do not ...
-
Vivitek D795WT - page 52
DLP Projector – User’s Manual Using the Physical Lock ® Using the Kensington – 44 – Lock If you are concerned about security, attach the proj ector to a permanent obje ct with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitable Kensi ngton security cable. The security lock corresponds to ...
-
Vivitek D795WT - page 53
DLP Projector – User’s Manual – 45 – T ROUBLESHOOTING Common problems and solut ions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a ...
-
Vivitek D795WT - page 54
DLP Projector – User’s Manual – 46 – LED Error Messages E RROR C ODE M ESSAGE S W ARNING LED L AMP LED B LINK P OWER LED B LINK Power On 0 0 Blue Power Off 0 0 Oran ge Cooling 0 0 Flashing Over Temperat ure ON 0 0 Thermal Break Sensor error 0 0 4 Burner Fan er ror 0 1 6 Lamp Fan erro r 0 2 6 Lamp Door O pen 0 0 7 DMD error 0 0 8 In the even ...
-
Vivitek D795WT - page 55
DLP Projector – User’s Manual – 47 – Lamp Problems Problem: There is no light from the projector 1. Check that the power cable is secure ly connected. 2. Ensure the power source is goo d by te sting with another electrical devi ce. 3. Restart the projector in the co rrect order and check that the Powe r LED is green. 4. If you have replaced ...
-
Vivitek D795WT - page 56
DLP Projector – User’s Manual – 48 – HDMI TM Q & A Q. What is the difference between a “Standard” HDMI TM cable and a “High-Speed” HDMI TM cable? Recently, HDMI TM Licensing, LLC announced that cables would be test ed as Standard or High-Speed cables. ․ Standard (or “category 1”) HDMI TM cables have been tested to perform ...
-
Vivitek D795WT - page 57
DLP Projector – User’s Manual – 49 – S PECIFICATIONS Specifications Model name D795WT Display ty pe TI DMD 0.65" WXGA Resolution WXGA 1280 x 800 Native Projection distance 22.4 mm ~ 62.3 mm(+/-10mm ) Projection screen size 87 to 97 inches Projection lens Fix Vertical keystone correcti on +/- 15 degrees Projection methods Front, Rear, D ...
-
Vivitek D795WT - page 58
DLP Projector – User’s Manual – 50 – Projection Distance vs. Projection Si ze D L H Image Height W Image Width Projection Distance and Size Table WXGA D795WT 16:10 Distance 62.3+/-1 0mm 22.4+/-10m m Diagonal 97" 87" Image height 2089mm 1868mm Image Width 1305mm 1 167mm H 440+/-50m m 342+/ -50mm ...
-
Vivitek D795WT - page 59
DLP Projector – User’s Manual – 51 – Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB ( ANALOG ) DVI/ HDMI TM ( DIGITAL ) NTSC — 15.734 60.0 O — － ...
-
Vivitek D795WT - page 60
DLP Projector – User’s Manual – 52 – S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO C OMPONENT RGB ( ANALOG ) DVI/ HDMI TM ( DIGITAL ) 720p 37.5 50.0 — O — O 720p 45.0 60.0 — O — O 1080i 33.8 60.0 — O — O 1080i 28.1 50.0 — O — O 1080p 27 24 — O — O 1080p 28 25 — O — O 1080p 33.7 30 — O — ...
-
Vivitek D795WT - page 61
DLP Projector – User’s Manual Projector Dimensions 319.00 354.00 41 1.00 219.00 157.00 – 53 – ...
-
Vivitek D795WT - page 62
DLP Projector – User’s Manual – 54 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful interference when the equipm ent is operated in a commer ...
-
Vivitek D795WT - page 63
2 0 1 0 0 9 2010 V ivitek Corporation. All rights reserved. All trademarks are the property of their respective owners. All specifications are subject to change without prior notice. ...
¿Tienes una pregunta acerca de Vivitek D795WT?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Vivitek D795WT, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Vivitek D795WT probablemente compartirá una forma de solucionarlo.