-
EverFocus IP 99 Series - page 1
IP 99 Series EVS1 10 1CH V ideo Server EIP220 Network Camera User ’ s Manual Copyright © EverFocu s Electronics Corp, V ersion Release: Dec. 2008 ...
-
EverFocus IP 99 Series - page 2
IP99 series 1 Product Name: IP99 EverFocus Network Cameras Model Number(s): EVS1 10, EIP220 FCC Notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the lim its for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag ...
-
EverFocus IP 99 Series - page 3
IP99 series 2 About this document All the safety and operating instructions should be read and followed before the unit is operated. This m anual should be retained for future reference. The information in this m anual was current wh en published. The m anufacturer reserves the right to revise and impr ove its products. All specifica tions are ther ...
-
EverFocus IP 99 Series - page 4
IP99 series 3 power source ratings. Do not use the app liance in an extreme environm ent where high temperature or high humidity exists. Use the applian ce at temperature within -10 ℃ ~ 50 ℃ / 14 ~ 1 ℉ 22 and a humidity below 90%. The input power source ℉ for this appliance is 12VDC. Use only the recommended power supp lies. Power supplies ...
-
EverFocus IP 99 Series - page 5
IP99 series 4 For example: (This web site may change without notices.) http://www .microsoft.com/downloads ...
-
EverFocus IP 99 Series - page 6
IP99 series 5 T ABLE OF CONTENTS 1. ST AR TING THE CAMERA O R VIDEO SER VER ............................................. 7 1.1 I NST ALL IP99 SEARCHER IN PC ............................................................................. 7 1.2 A SSIGN N EW IP ADDRESS ( OPTIONAL ) .................................................................. 7 1. ...
-
EverFocus IP 99 Series - page 7
IP99 series 6 3.12 PTZ SETTING ..................................................................................................... 26 3.13 A DMINIS TRA TOR ............................................................................................... 27 3.14 C HANGE P ASSW ORD ..................................................................... ...
-
EverFocus IP 99 Series - page 8
IP99 series 7 1. S tarting the camera or video server 1.1 Install IP99 sear cher in PC Though you can simply enter 192.168.1.99 in IP addre ss bar to access camera when you connect to only one IP99 device.( Default IP address is: 192.168.1.99 Port is: 80) . However , it is recommended that you use IP search to m anage IP camera and encoder . Please ...
-
EverFocus IP 99 Series - page 9
IP99 series 8 Note: Please consult your ne twork administrator f or avoi ding IP address conflict Diagram 1.2 Assign new IP address 1.3 Access ing the camera Double click selected camera in IP99 searcher or Enter IP address in IP address bar , as shown in diagram 1.3: Diagram 1.3 enter IP address Enter IP address and click Enter to conf irm, login ...
-
EverFocus IP 99 Series - page 10
IP99 series 9 In login window , enter user name and password, （ default user name is admin, p a s s w o r d i s 11111111 ） . Click “ Confirm ＂ button to enter web window , as shown in diagram 1.5: Diagram 1.5 Camera W eb page 1.4 Reset and Factory Default Y ou can physically push” RST” butt on on IP99 camera or click “Default” on IP ...
-
EverFocus IP 99 Series - page 11
IP99 series 10 2.1 Add more videos If you wish to add one video display in the same web page, click “Add New” button, as shown in diagram 2.2: Diagram 2.2 Add video display 2.2 Change video resour ce Y ou can change video resource and simultaneously view multiplies cameras and encoders at same time. Right click mouse on display center point and ...
-
EverFocus IP 99 Series - page 12
IP99 series 11 2.3. Edit and Change Display Layout 2.3.1 Edit layout If you wish to add more vi deo displays, please click , then interface changes to ， you can freely set the layout of vide o display in this window . Enter the number of channels you want for each row . Use comma to separate them. And click to make the actual layout change. For e ...
-
EverFocus IP 99 Series - page 13
IP99 series 12 Diagram 2.5 Layout selection 2.4 Zoom in/zoom out 2.4.1 Integer z oom in/zoom out Click buttons at top right side of the page to zoom in or zoom out the entire screen. 2.3.2 Single display zoom in/zoom out T o zoom in/zoom out single channel screen, direct the mouse to at top of that channel display , and click on , slide the tilt wh ...
-
EverFocus IP 99 Series - page 14
IP99 series 13 Diagram 2.6 Record 2.4.2 S top recording Method 1: Click on button located at top right corn er of the image, it will stop recording immediately , button changes to . Method 2 ： Double click on the green area of , it returns to original color meaning th at recording is stopped. 2.4.3 Snapshot Click button to snapshot the image ， ...
-
EverFocus IP 99 Series - page 15
IP99 series 14 Click “ Search NVR ＂ button to search the NVR device used for archiv ing recording files. If you do not have NVR devi ce, please ignore this selection. Open the file to be played, click “ Play ＂ to play recorded video. ¾ Click fast forward button , to adjust playback speed. ¾ Click fast reverse button , to adjust reverse sp ...
-
EverFocus IP 99 Series - page 16
IP99 series 15 Note 2 ： PTZ control can also be preformed by using PC’ s keyboard, please refer to section 5 of 2.4.7 for more details. Note3: PTZ control is functioning only if PTZ Function is set On in PTZ Setting, please refer to section 3.12. 2.4.6 On-Screen PTZ Control (for V ideo Server only) On Screen PTZ function is available when you c ...
-
EverFocus IP 99 Series - page 17
IP99 series 16 Diagram 2.10 Display size 2 ） Change source: Click “ Change source ＂ to f ill out information for the IP camera to be controlled, as shown in diagram 2.1 1: Diagram 2.1 1 Change source First row: Camera name Second row: IP address of camera to be connected Third row: User name Fourth row: Login password When you finish filling ...
-
EverFocus IP 99 Series - page 18
IP99 series 17 4 ） Sound ON ： used to enable/disable sound transmission. 5 ） PTZ(for V ideo Server only) ： Click “ PTZ ＂ option which allows you to check keyboard keys of PC used to control speed dome, as shown in diagram 2.13: Diagram 2.13 PTZ contraol keys and functions 6 ） File .av to A VI ： Click “ File .av to A VI ＂ option, ...
-
EverFocus IP 99 Series - page 19
IP99 series 18 Diagram 3.1 status information 3.2 V ideo/audio setting Select 2. V ideo & Audio from the drop-down menu at top right corner , as shown in diagram 3.2: Diagram 3.2 V ideo & Audio settings Enable settings for video stream, snapshot, OSD, Record and Audio. 1 ） CBR setting: Set CBR enabled or disabl ed, default value is Disabl ...
-
EverFocus IP 99 Series - page 20
IP99 series 19 2 ） Resolution: Set record resolution D1: 720x480 (NTSC) / 720x576 (P AL) Half D1: 720x240 (NTSC) / 720x288 (P AL) CIF: 352x240 (NTSC) / 352x288 (P AL) QCIF: 176x120 (NTSC) / 176x144 (P AL) 3 ） Limit frame rate to: S et frame rate according o resolution. 4 ） OSD setting: Set OSD text and font size. 5 ） Record: Set REC File pa ...
-
EverFocus IP 99 Series - page 21
IP99 series 20 Diagram 3.3 （ b ） Device setting Diagram 3.3 （ b ） shows the functions of IP camera, it is for IP camera NOT for V ideo Server . It has some additional functions compared to other cam eras, as shown in diagram 3.3 (c): Diagram 3.3 （ c ） Extension functions of device setting Mirror: Enable or Disable Mirro r function by se ...
-
EverFocus IP 99 Series - page 22
IP99 series 21 selected area, click “Remove regi on”. Please refer to diagram 3.4: Diagram 3.4 Alarm event 1 ） Motion detection event: No ev ent, send JPEG file by e-mail or upload to FTP . Note: W hen sending JPEG by e-mail or upload to FTP , file will be sent to the assigned e-mail adress. 2 ） Alarm I/O setting: Set Alarm Input/Output set ...
-
EverFocus IP 99 Series - page 23
IP99 series 22 3.5 Networki ng Set camera’ s IP address, DNS setting, HTTP port information, as shown in diagram 3.6: Diagaram 3.6 Networking DHCP will automatically get the IP addr ess. If you are not using DHCP , you can manually assign IP address and port. Primary DNS server has to be the same as HTTP port set in IP address. Default HTTP port ...
-
EverFocus IP 99 Series - page 24
IP99 series 23 3.6 W ireless LAN Assignment will be made accord ing to local wireless router , as shown in diagram 3.7: Diagram 3.7 W i reless settings 3.7 PPPOE setting Select whether to enable PPPoE function. If PPPoE function is enabled, please enter user name and password: Diagram 3.8 PPPOE setting ...
-
EverFocus IP 99 Series - page 25
IP99 series 24 When network is connected, it will show IP address, default router and DNS server after connection in status section. Enable “ Email notif ication when IP is changed ＂ function, so when the system re-connects to network, it will automatically notif y the IP address to user by e-mail. 3.8 DDNS setting Dynamic DNS setting as shown ...
-
EverFocus IP 99 Series - page 26
IP99 series 25 Diagram 3.10 SMTP setting Enter user name and password of login mail server . Once SMTP is set, it can be used when snapshot, alarm and PPPoE are enabled. 3.10 FTP setting Select “ FTP server setting ＂ page, as shown in diagram 3.1 1 ： Diagram 3.1 1 FTP setting ...
-
EverFocus IP 99 Series - page 27
IP99 series 26 Set FTP server , user name, password, FTP comm and port and path & file name. User can upload recorded video and event file to FTP server . 3.1 1 Date & Time setting Set camera’ s current date, time and time zone, as shown in diagram 3.12: Dirgram 3.12 Date & T ime settings 3.12 PTZ setting Define PTZ protocol, PTZ ba u ...
-
EverFocus IP 99 Series - page 28
IP99 series 27 Diagram 3.13 PTZ settings Since IP address is the only fixed one, ther efore PTZ address is se t as “1”. Protocols are Pelco-D and Pelco-P wh ich are in common use. Note: When using Everfocus speed dome, us er only needs to set the protocol as AUTO in order to control the speed dom e. 3.13 Administrator Add user , set user ’ s ...
-
EverFocus IP 99 Series - page 29
IP99 series 28 Diagram 3.14 Management 3.14 Change password Change user ’ s login password, as shown in diagram 3.15: Diagram 3.15 change password 3.15 Special setting Set compression, set camera type and transf orm to A VI for mat, as shown in diagram 3.16: ...
-
EverFocus IP 99 Series - page 30
IP99 series 29 Diagram 3.16 Special setting Default compression rate is 8. The lowest compression rate is 5 for clearer image. compression 15 is the highest rate for smoother im age. 3.16 Maintenance Maintenance and system upgrade, as shown in diagram 3.17: Diagram 3.17 Maintenance server an d Upgrade server Note: Please only use *.img file provide ...
-
EverFocus IP 99 Series - page 31
IP99 series 30 4. Fr equently Asked Questions 4.1 I have problem r ecording and playback on W indows V ista. Answer: Y ou need to turn off User Account Control (UAC) 1. Open Control Panel. 2. Under User Account and Family settings click on the "Add or remove user account". 3. Click on one of the user accounts, for example you can use the ...
-
EverFocus IP 99 Series - page 32
IP99 series 31 EverFocus Electronics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chi, T aipei, T aiwan TEL: 886-2-26982334 F AX: 886-2-26982380 www .everfocus.com.tw USA Office: 1801 Highland A ve. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .everfocus.com USA N.Y . Office: 415 Oser A venue Unit ...
¿Tienes una pregunta acerca de EverFocus IP 99 Series?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con EverFocus IP 99 Series, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con EverFocus IP 99 Series probablemente compartirá una forma de solucionarlo.