-
JVC LYT0075-001A - page 1
COMPACT VHS CAMCORDER LYT0075-001A INSTRUCTIONS ENGLISH EN Com pa ct VHS The Logical Choice The only compact video cassettes that can be used with your VHS VCR* G R-A XM43 ...
-
JVC LYT0075-001A - page 2
2 EN Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder . W arning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge ...
-
JVC LYT0075-001A - page 3
EN 3 n LCD Colour Monitor ( Z pg. 14) n Program Manager II ( Z pg. 20 – 35) n Programme AE with Special Effects ( Z pg. 20, 21) •Auto Mode Lock •Auto Mode Release •Electronic Fog Filter •ND Ef fect •Sepia •T wilight •Sports •Nega/Posi •1/2000 sec. High Speed Shutter n Picture Stabiliser ( Z pg. 18) n Digital Hyper Zoom ( Z pg. 1 ...
-
JVC LYT0075-001A - page 4
4 EN 1 1 2 GETTING ST ARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power . NOTES: ● No function is available without power supply . ● Use only specified power supply . ● Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK SUPPL Y POWER 1 Connect th ...
-
JVC LYT0075-001A - page 5
EN 5 CHARGE MARKER A char ge marker is provided on the battery pack to help you remember whether it has been charged or not. T wo colours are provided (red and black)—you choose which one means char ged and which means dischar ged. NOTES: ● The recording time per char ge is affected by such factors as the time spent in Record-Standby mode and t ...
-
JVC LYT0075-001A - page 6
6 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Inser tion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab. REMOVE BA TTERY (when repl ...
-
JVC LYT0075-001A - page 7
EN 7 Date/T ime Setting ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “DA TE/TIME”, then press it. The DA TE/TIME Setting Menu appears. • If you decide you want to ret ...
-
JVC LYT0075-001A - page 8
8 EN GETTING ST ARTED (cont.) T ape Length Setting Set the tape length according to the length of the tape used. ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “T APE LENG ...
-
JVC LYT0075-001A - page 9
EN 9 1 2 2 3 3 4 4 5 Loading/Unloading A Cassette OPEN LCD MONITOR 1 Open the LCD monitor to an angle of over 45 degrees. OPEN CASSETTE HOLDER 2 Press EJECT until the holder opens. Do not use force to open. INSER T/REMOVE CASSETTE 3 Make sure the label is facing outward. CLOSE CASSETTE HOLDER 4 Press PUSH and make sure the holder is closed and lock ...
-
JVC LYT0075-001A - page 10
10 EN GETTING ST ARTED (cont.) Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Button. Refasten the V elcro strip. Viewfinder Adjustment POSITION ...
-
JVC LYT0075-001A - page 11
EN 11 CAUTION: When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder . T o prevent damage to the unit caused by falling over , do not use a small-sized tripod. 2 4 3 2 1 1 T ripod Mounting ALIGN AND TIGHTEN 1 Align the screw and camera direction stud on the tripod with the camera’ s mounting socket and stud hol ...
-
JVC LYT0075-001A - page 12
12 EN RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 4) ● T ape Length Setting ( Z pg. 8) ● Grip Adjustment ( Z pg. 10) LOAD A CASSETTE 1 First open the LCD monitor to an angle of over 45 degrees. Press EJECT to open the cassette holder , then i ...
-
JVC LYT0075-001A - page 13
EN 13 STOP RECORDING 4 Press the Recording Start/Stop Button again to stop recording. • The camcorder re-enters the Record-Standby mode. NOTES: ● When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 45 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power . ● A ...
-
JVC LYT0075-001A - page 14
14 EN RECORDING Basic Recording (cont.) Shooting while watching the LCD monitor Before the following steps, perform step 1 ( Z pg. 12). ENTER RECORD–ST ANDBY MODE 2 Make sure the LCD monitor is fully open. Slide the LENS COVER Open/Close Switch to open the lens cover , then set the Power Switch to CAMERA. • The power indicator lights and the ca ...
-
JVC LYT0075-001A - page 15
EN 15 Journalistic shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR 1 Make sure the LCD monitor is fully open. TIL T LCD MONITOR 2 T ilt the LCD monitor in the most convenient direction. • The LCD monitor can rotate almost full circle (270°: 90° downward, 180° upward). Brightn ...
-
JVC LYT0075-001A - page 16
16 EN MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST ZOOM SPEED FAST SLOW EX I T RECORDING Basic Features FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitly doubles the maximum 22x ma ...
-
JVC LYT0075-001A - page 17
EN 17 FEA TURE: Quick Review PURPOSE: T o check the end of the last record- ing. OPERA TION: 1) Press “ ” and release quickly during the Record–Standby mode. n T ape is rewound for about 2 seconds and played back automatically , then pauses in Record–Standby mode for the next shot. NOTE: Distortion may occur at start of playback. This is no ...
-
JVC LYT0075-001A - page 18
18 EN FEA TURE: Picture Stabiliser PURPOSE: T o compensate for unstable images caused by camera-shake, particularly at high magnification. OPERA TION: 1) Press P . ST ABILIZER . “ ”appears. n T o switch off the Picture Stabiliser , press P . STABILIZER . The indicator disappears. NOTES: ● Accurate stabilisation may not be possible if hand sha ...
-
JVC LYT0075-001A - page 19
EN 19 Auto Date Record mode Date-off mode (No display) Date display Time display Date/Time display The characters you have set using Character Generator ( Z pg. 25) 22:50:00 Date display Time display Date/Time display 25.12.98 25.12.98 22:50:00 Auto date record mode Auto date record executed 25.12.98 AUTO DATE Auto Date Record mode DA TE/TIME Displ ...
-
JVC LYT0075-001A - page 20
20 EN 1 / 2 0 0 0 F G N D A U T O M O D E L O C K R E L E A S E SEPIA Programme AE With Special Effects All you have to do to access any of the variety of shooting effects is to turn the Select Dial. SELECT MODE 1 T urn the Select Dial until the symbol of the function you want is aligned with the mark. • The selected mode’s name and its indicat ...
-
JVC LYT0075-001A - page 21
EN 21 Dial LCD monitor/ Mode symbol V iewfinder indication Auto Mode Lock LOCK AUTO LOCK Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. • In this mode the following controls are disabled; DA TE/TIME display select, and the Menu Jog Dial. Auto Mode Release REL ...
-
JVC LYT0075-001A - page 22
22 EN B K FADER Fades in/out to a black screen. MOSAIC (Fader) Gradually turns/returns the picture into/from a mosaic pattern. SHUTTER (Wipe) A black screen moves in from the top and bottom, closing over the image like a shutter , or a new image pushes open the black screen vertically from the centre. SLIDE (Wipe) A black screen moves in from the l ...
-
JVC LYT0075-001A - page 23
EN 23 NOTE (for Fade/W ipe, Wide, Super LoLux, Instant Titles and Picture Stabiliser) : When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings (Fade/W ipe-standby : “OFF”, W ide mode : off, Super LoLux : “MAX”, Instant T itle : off, Picture Stabiliser: off). Then when the Select Dial is returned ...
-
JVC LYT0075-001A - page 24
24 EN TITLE Instant T itles The camcorder has eight preset titles in memory . Y ou can superimpose one of them above a previously stored title as shown in the illustration to the left. SELECT PRESET TITLE 1 Press TITLE repeatedly to cycle through the preset titles until the desired title is displayed. MOVIE STAR HAPPY BIRTHDAY No display HAPPY HOLI ...
-
JVC LYT0075-001A - page 25
EN 25 MENU MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST 4 BACK REC T IME INT. T IME TALLY LAMP CHARACTER D. ZOOM COLOUR BAR JLIP ID NO. DEMO MODE 4 MENU END OFF OFF ON ON OFF 07 OFF CHARACTER A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Ä Ö Ü À È ...
-
JVC LYT0075-001A - page 26
26 EN Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. The Menu Screen appears. SELECT FUNCTION 2 Rotate the MENU Jog Dial to ...
-
JVC LYT0075-001A - page 27
EN 27 OFF ON F AST SLOW FOCUS AUT O Adjusts focus automatically. MANU Allows you to adjust focus manually ( Z pg. 30, 31). EXPOSURE AUT O Adjusts exposure automatically . MANU Allows you to adjust exposure manually ( Z pg. 29). DA TE/TIME Allows you to set the current date and time ( Z pg. 7). TELE MACRO Usually the distance to a subject where the ...
-
JVC LYT0075-001A - page 28
28 EN Menu Screen Explanations (cont.) = Factory setting and when the Select Dial is set to AUTO LOCK REC TIME This feature allows you to set the parameters for Animation and T ime-Lapse recording ( Z pg. 35). INT . TIME This feature allows you to set the parameters for Self-T imer ( Z pg. 34) and T ime- Lapse recording ( Z pg. 35). T ALL Y LAMP ON ...
-
JVC LYT0075-001A - page 29
EN 29 Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override and make the adjustment manually . ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial. The Menu Screen appears. ACCESS EXPOSURE MENU SCREEN 2 Rotate the MENU Jog Dia ...
-
JVC LYT0075-001A - page 30
30 EN RECORDING Advanced Features (cont.) Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene. • When illumination ...
-
JVC LYT0075-001A - page 31
EN 31 MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST AUTO MANU EX I T FOCUS Manual Focus NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg. 10). If you haven’ t, do so before continuing. ACCESS MENU SCREEN 1 T urn the Select Dial to ...
-
JVC LYT0075-001A - page 32
32 EN Manual White Balance Adjustment (M.W .B.) The white balance is usually adjusted automatically . However , the more advanced camcorder operator would prefer to control this function manually and achieve a more professional colour/tint reproduction. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUTO LOCK, then press the MENU ...
-
JVC LYT0075-001A - page 33
EN 33 MWB MWB sets the colour temperature for the subject’ s light source so you can shoot with natural colours that are unaffected by surroundings, even when there are multiple subjects with different colour temperatures. PREP ARE WHITE OBJECT 1 Point the camcorder at a white, flat object such as a sheet of white paper . SELECT MWB 2 Follow step ...
-
JVC LYT0075-001A - page 34
34 EN RECORDING Advanced Features (cont.) Self-Timer Y ou can set the delay between pressing the Recording Start/Stop Button and the actual start of recording. If you secure the camcorder , you (or whomever is operating the camcorder) can enter the scene before recording starts. NOTE: Make sure the camcorder is in the Record-Standby mode before per ...
-
JVC LYT0075-001A - page 35
EN 35 Animation Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Make sure the camcorder is in the Record-Standby mode before performing the following steps. ACCESS MENU SCREEN 1 T urn the Select Dial to an ...
-
JVC LYT0075-001A - page 36
36 EN M–0: 23 : 45 4 PLA YBACK Basic Playback PLA Y/P AUSE STOP FF REW LCD Monitor in Retracted Position T ape running indicator 4 : Playback 3 : Fast-Forward/ Forward Search 2 : Rewind/Reverse Search 6 : Still Playback T ape counter Battery pack remaining power indicator* LCD monitor/ viewfinder indications LOAD A CASSETTE 1 First open the LCD m ...
-
JVC LYT0075-001A - page 37
EN 37 AT PLA YBACK Features Adjust the brightness of the LCD monitor T o brighten the image, turn the BRIGHT Dial towards “ + ”. T o darken the image, turn the Dial towards “ – ”. Speaker volume control Y ou can adjust the speaker volume by turning the VOLUME Dial. ADJUST VOLUME 1 If you want to turn up the volume . . . T urn the Dial tow ...
-
JVC LYT0075-001A - page 38
38 EN PLA YBACK Featur es (cont.) FEA TURE: Still Playback PURPOSE: T o pause during playback. OPERA TION: 1) Press PLA Y/P AUSE during playback. 2) T o resume normal playback, press PLA Y/P AUSE again. NOTE: Noise bars appear and pictures may become monochrome during Still Playback. This is normal. FEA TURE: Shuttle Search PURPOSE: T o allow high- ...
-
JVC LYT0075-001A - page 39
EN 39 PLA YBACK Using The Cassette Adapter Cassette Adapter Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading. INSER T BA TTERY 1 Slide the battery cover up to remove it, ...
-
JVC LYT0075-001A - page 40
40 EN There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR A (Editing, Dubbing and Playback) NOTE: Use the provided Audio and V ideo cables. CONNECT CAMCORDER TO VCR 1 As shown in the illustration to the left, connect the Audio and V ideo cables between the ...
-
JVC LYT0075-001A - page 41
EN 41 T APE DUBBING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration to the left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power Switch to “PLA Y”, turn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR. SELECT VCR MODE 3 Engage the VCR’ s AUX and Rec ...
-
JVC LYT0075-001A - page 42
42 EN 1 4 6 8 2 ! # % & 3 5 7 9 0 @ $ ^ 1 1 2 3 1 2 3 1 A B USING REMOTE CONTROL UNIT RM-V700U (optional) Lock hole Release tab INST ALLING THE BA TTERY PULL OUT BA TTERY HOLDER 1 T ype A : Pull out while sliding the lock hole. T ype B : Pinch the release tab and pull out. INSER T BA TTER Y 2 Making sure the plus (+) side is up, insert the lith ...
-
JVC LYT0075-001A - page 43
EN 43 INDEX 1MIN 1 2S 15 ° 5m 15 ° 30 ° 30 ° FEATURE: Self-Timer , Animation and T ime-Lapse PURPOSE: The remote control lets you set/release Interval T imer and Rec Time functions as well as the Menu Screen. OPERATION: Self-Timer 1) Set Instead of performing steps 1 through 4 on pg. 34 (“Self-T imer”), press INT . TIME on the remote contro ...
-
JVC LYT0075-001A - page 44
44 EN 1 2 3 4 5 6 7 8 9 0 VCR BRAND NAME BUTTONS (A) (B) 6 2 6 4 7 7 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 GRUNDIG 1 4 3 4 HITACHI 6 6 6 3 PANASONIC 1 3 1 7 1 1 9 4 1 8 JVC 9 1 9 6 9 3 BLAUPUNKT AKAI 9 7 9 8 3 2 FERGUSON 1 3 VCR BRAND NAME SANYO 3 6 3 5 SHARP 1 5 1 ` TOSHIBA 6 9 6 1 SONY 6 5 6 ` 3 9 ...
-
JVC LYT0075-001A - page 45
EN 45 MAKE CONNECTIONS CONNECT TO . . . 1 A JVC VCR EQUIPPED WITH REMOTE P AUSE TERMINAL Connect the editing cable to the Remote P AUSE terminal. B JVC VCR NOT EQUIPPED WITH REMOTE P AUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR Connect the editing cable to the R.A.EDIT connector . C VCR OTHER THAN TYPE A OR B Connect the editing cable to the ...
-
JVC LYT0075-001A - page 46
46 EN IN OUT 1 0:00:25 - - : - - : - - 2 3 4 5 6 7 8 COUNTER 0:00:25 TOTAL 0:00:00 IN OUT 1 0:00:25 0:01:05 2 0:03:18 0:03:31 3 0:02:33 0:02:53 4 0:04:11 - - : - - : - - 5 6 7 8 COUNTER 0:04:11 TOTAL 0:01:13 USING REMOTE CONTROL UNIT (cont.) SELECT SCENES ACCESS R.A. EDIT COUNTER DISPLA Y 1 Press PLA Y/PAUSE , then press ON/OFF and the counter disp ...
-
JVC LYT0075-001A - page 47
EN 47 1 3 2 IN OUT IN OUT IN OUT Original tape (camcorder) Edited tape (VCR) AUTOMA TIC EDITING TO VCR ENGAGE VCR’S RECORD-P AUSE MODE 1 Point the remote control towards the VCR’ s infrared sensor and press VCR REC STBY , or manually engage the VCR’ s Record-Pause mode. BEGIN AUTOMA TIC EDITING 2 Press the MENU Jog Dial on the camcorder , and ...
-
JVC LYT0075-001A - page 48
48 EN M– 0:1 2:3 4 USING REMOTE CONTROL UNIT (cont.) Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points. The original audio remains unchanged. NOTE: Use the RM-V700U remote control unit to perform this procedure. SELECT ...
-
JVC LYT0075-001A - page 49
EN 49 e 4 M – 0 :05:20 e 4 M – 0 :05:20 Audio Dubbing Y ou can record a new soundtrack on a prerecorded tape (normal audio only). Perform steps 1 , 2 and 3 of the Insert Editing procedure ( Z pg. 48) before continuing. • The sound comes from the built-in microphone (or an external microphone if connected). FIND EDIT -IN POINT 1 Press REW to g ...
-
JVC LYT0075-001A - page 50
50 EN TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) POWER RECORDING PLA YBACK T APE TRANSPORT No power is supplied. The power suddenly goes off and doesn’t come back on by itself. Recording cannot be performed. Recording does not start. The tape is running, but there’ s no playback picture. Playback picture is blurred or interrupted. The counter in ...
-
JVC LYT0075-001A - page 51
EN 51 SYMPTOM POSSIBLE CAUSE(S) OTHER The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly . In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Char ger, etc.) and clock battery; and then re-connect it an ...
-
JVC LYT0075-001A - page 52
52 EN INDEX 3 2 p Q i q T Y o 1 # & * ( @ ! 0 ) $ W w e r t % R ^ u y E U 9 7 8 6 4 5 ...
-
JVC LYT0075-001A - page 53
EN 53 Controls 1 Power Zoom Button ........................... Z pg. 16 2 Multi-Function Control • EFFECT Button ................................. Z pg. 22 • WIDE Button ................................... Z pg. 23 • TITLE Button .................................... Z pg. 24 • SUPER LOLUX Button ..................... Z pg. 23 3 Select Dial ...
-
JVC LYT0075-001A - page 54
54 EN FINE 1 2 REC 30MIN 444 4 S.L X T 3 0 01 MWB P NORM 5MIN 1 4S LENS COVER PAUSE 25. 12. 98 2 2 : 50 : 00 MERRY CHRISTMAS TAPE END T WILIGHT 1 * 5 * 6 2 3 4 % * ^ & 8 $ 9 # @ ( * ) 7 0 ! INDEX (cont.) LCD monitor/Viewfinder Indications # Instant T itle Display ........................... Z pg. 24 $ Date/Time/Character Display ............. Z ...
-
JVC LYT0075-001A - page 55
EN 55 General Batter y Precautions • When the C-P6U or C-P7U (cassette adapter) is not functioning even when correctly operated, the battery is exhausted. Replace it with a fresh one. • Use only the following battery: C-P6U or C-P7U ..................... R6 (AA) size Please make note of the following rules for battery use. When misused, battery ...
-
JVC LYT0075-001A - page 56
56 EN CAUTIONS (cont.) 4. T o protect the unit, DO NOT . . . .... allow it to become wet. .... drop the unit or strike it against hard objects. .... subject it to shock or excessive vibration during transportation. .... keep the lens directed at extremely bright objects for long periods. .... direct the eyepiece of the viewfinder at the sun. .... c ...
-
JVC LYT0075-001A - page 57
EN 57 SPECIFICA TIONS GENERAL Format : VHS PAL standard Power source : DC 6V Power consumption LCD monitor off, viewfinder on : 6.0 W LCD monitor on, viewfinder off : 6.3 W LCD monitor on, viewfinder on : 7.0 W Signal system : P AL-type V ideo recording system Luminance : FM recording Colour : Converted sub-carrier direct recording Conforms to VHS ...
-
JVC LYT0075-001A - page 58
...
-
JVC LYT0075-001A - page 59
...
-
JVC LYT0075-001A - page 60
GR-AXM43 COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD. EG Printed in Japan 0398MKV * UN * SN V ICTOR COM P ANY OF JAPAN, LIMITED EN ...
¿Tienes una pregunta acerca de JVC LYT0075-001A?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con JVC LYT0075-001A, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con JVC LYT0075-001A probablemente compartirá una forma de solucionarlo.