-
Yamaha SW-3 - page 1
O WNER’S MANU AL MODE D’EMPLOI Active Servo Processing Subwoofer System Enceinte pour très basses fréquences de traitement à asservissement actif SW - 3 Active Servo Technology Thank you f or selecting this Y AMAHA Subwoof er System. Nous v ous remercions d’av oir por té v otre choix sur cette enceinte pour très basses fréquences Y AMAH ...
-
Yamaha SW-3 - page 2
1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All oper ...
-
Yamaha SW-3 - page 3
3 English 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or ano ...
-
Yamaha SW-3 - page 4
4 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, d ...
-
Yamaha SW-3 - page 5
5 English • This subwoofer system employs YAMAHA Active Servo Technology which YAMAHA developed for reproducing higher quality super-bass sound. (Refer to page 12 for details on Active Servo Technology.) This unit does not only enhance bass frequency response of sound output in your audio system, but, by reproducing the bass frequencies, the subw ...
-
Yamaha SW-3 - page 6
6 • Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made. • When making connections between this unit and other components, be sure all connections are made correctly and consistently, that is to say L (left) to L , R (r ...
-
Yamaha SW-3 - page 7
7 English If y our amplifier has tw o sets of speaker terminals For connections, cut the speaker wires as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wires are reversed, the sound will be un ...
-
Yamaha SW-3 - page 8
CONNECTING T O LINE OUTPUT (PIN JA CK) TERMINALS OF THE AMPLIFIER • Leave the main speakers connected to the amplifier. • Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT. * For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of ...
-
Yamaha SW-3 - page 9
9 English 1 POWER indicator Lights in green when the POWER switch is turned ON, and goes off when turned OFF. * STANDBY mode: If the AUTO POWER ON/OFF switch on the rear panel is set to ON, this indicator lights in red when no signal is input to this unit. 2 AUTO POWER ON/OFF switch By setting this switch to the ON position, this unit’s automatic ...
-
Yamaha SW-3 - page 10
1 Set the VOLUME control to minimum. 2 Turn on the power supply to all the components. 3 Play any source and adjust the amplifier’s volume control to the desired listening level. 4 Turn up the VOLUME control gradually to adjust the volume balance between this unit and the main speakers. 5 Adjust the HIGH CUT control to the position where the desi ...
-
Yamaha SW-3 - page 11
11 English This unit’s frequency characteristics • When combined with a 4” or 5” acoustic suspension, 2 way system • When combined with a 6” or 8” acoustic suspension, 2 way system VOLUME 0I 0 HIGH CUT I50 Hz 50 Hz VOLUME 0I 0 HIGH CUT I50 Hz 50 Hz 20 50 100 200 500Hz 40 50 60 70 80 90 dB HIGH CUT 50 Hz HIGH CUT 100 Hz HIGH CUT 150 Hz ...
-
Yamaha SW-3 - page 12
12 A CTIVE SER V O TECHNOLOGY The theory of Active Servo Technology is based upon two major factors, the Helmholtz resonator and negative- impedance drive. Active Servo Processing speakers reproduce the bass frequencies through an “air woofer”, which is a port or opening in the speaker’s cabinet. This opening is used instead of, and performs ...
-
Yamaha SW-3 - page 13
13 English If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. TR OUBLESHOO TI ...
-
Yamaha SW-3 - page 14
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 7731 ...
¿Tienes una pregunta acerca de Yamaha SW-3?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Yamaha SW-3, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Yamaha SW-3 probablemente compartirá una forma de solucionarlo.