-
Uniden uh012sx - page 1
UNIDEN Model uh012sx UHF CB Radio ...
-
Uniden uh012sx - page 2
UNIDEN Model uh012sx UHF CB Radio Contents Introduction 2 Controls/Connectors 3 Indicators 4 Included with your uh012sx 5 Operation UHF CB Channels & Frequencies W arranty 1 1 Features 2 Preventative Maintenance 2 T roubleshooting 2 6 Setting the FM Squelch 6 Selecting a Channel 7 T ransmitting 7 Using Repeater Channels 7 Operating the uh012sx ...
-
Uniden uh012sx - page 3
UNIDEN Model uh012sx UHF CB Radio Introduction The Uniden uh012sx is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withst anding harsh environments. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit. T ransmit and Receive FM 40CH (UHF-C ...
-
Uniden uh012sx - page 4
TX BUSY CTCSS A S C Technology Advanced Signal Clarity uh012sx 8 9 5 6 7 UNIDEN Model uh012sx UHF CB Radio Controls/Connectors CTCSS Controls and Connectors Ref Item Page Ref Item Page Rotary Channel Selector 7 On/Off V olume & Squelch 6 Push to T alk (PTT) Switch 7 INST - Inst ant Channel Recall & Instant Channel Programming 9 DUP - Duplex ...
-
Uniden uh012sx - page 5
TX A S C Technology Advanced Signal Clarity uh012sx 1 2 3 4 2 3 1 4 UNIDEN Model uh012sx UHF CB Radio Indicators Indicators LED It is turned on when transmitting condition. LED It is turned on when receiving a signal or decoding a CTCSS code. It blinks while receiving a signal in scan mode. LED It is turned on when the current displayed channel has ...
-
Uniden uh012sx - page 6
UNIDEN Model uh012sx UHF CB Radio Included with your uh012sx Unid en Mod el uh012sx CB Rad io uh012sx Owners Manual Microphone Mounting Bracket, Knobs Rubber W asher , W asher S tars And Screws Microphone Hanger , Screws and W ashers 5 Optional Accessories DIN Mounting Kit (DMK8990) External S peaker (MS100) DC Power Cord with fuse ...
-
Uniden uh012sx - page 7
UNIDEN Model uh012sx UHF CB Radio Operation TX BUSY CTCSS A S C Technology Advanced Signal Clarity uh012sx CTCSS Setting the FM Squelch T urn the Unit ON by rotating the volume control clockwise. T urn the outer ring of the control to adjust the Squelch. Y ou must select a channel which is not in use before setting the SQUELCH control. (see p.7) Th ...
-
Uniden uh012sx - page 8
UNIDEN Model uh012sx UHF CB Radio Operation Selecting a Channel T urn the Rotary Channel Selector to select the desired channel. For your reference a list of the available channels, corresponding frequencies and guidelines for their use is printed on page 10. For Australia, Channels 05 and 35 are reserved for Emergency Calls. T ransmitting The uh01 ...
-
Uniden uh012sx - page 9
UNIDEN Model uh012sx UHF CB Radio Operation TX BUSY A S C Technolo g Advanced Signal Clari CTCS S TX A S C Technolo g Advanced Signal Cla r CTCS S BUSY 8 Operating the uh012sx in Duplex Mode For this example we are adopting CH01 as the channel being used in your area for repeater use. Press to switch Duplex On. "r" (for repeater) is displ ...
-
Uniden uh012sx - page 10
TX A S C Technology Advanced Signal Clarity uh012sx UNIDEN Model uh012sx UHF CB Radio Operation Programming the Inst ant Priority Channe Recalling the Inst ant Channel l T urn the Rotary Channel Selector to select the Priority Channel you prefer . Press and hold for 1.5 seconds to store the new setting. Momentarily press the key at any time to retu ...
-
Uniden uh012sx - page 11
UNIDEN Model uh012sx UHF CB Radio UHF CB CHANNELS & FREQUENCIES Simplex Mode Duplex Mode Simplex Mode CH No. T ransmit / Receive T ransmit CH No. T ransmit/Receive F requency (MHz) F requency (MHz) F requency (Mhz) 1 476.425 477.175 CH31 21 476.925 2 476.450 477.200 CH32 22 476.950 (RX only) 3 476.475 477.225 CH33 23 476.975 (RX only) 4 476.500 ...
-
Uniden uh012sx - page 12
© 2005 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UTZZ01932ZB(0) UNIDEN uh012sx UHF CB Radio T wo Y ear Limited W arranty Note: W arrantor: W arranty only available in original country of purchase Elements of W arranty: W arranty Duration: Parts Covered: Accessories: St atement of Remedy: Procedure for obt aining perf ...
-
Uniden uh012sx - page 13
UH047SX-2 Operating Guide T o bring outstanding wireless Communication products to people's lives throughout the world. ...
-
Uniden uh012sx - page 14
15 14 13 21 22 17 16 18 19 24 28 20 23 25 26 27 T ORS 1 Antenna 2 PTT(Push-T o-T alk) Key 3 Monitor Key 4 Keylock/Call Key 5 Memor y/Scan Key 6 Channel/Power Hi-L o Key 7 Speaker 8 Headset Jack 9 Select/Power On-Off Key 10 V olume/Select Up Key 11 V olume/Select Down Key 12 Microphone 13 Receive Indicator 14 T ransmit Indicator 15 Channel Indicator ...
-
Uniden uh012sx - page 15
GETTING ST ARTED Uniden does not represent this product to be waterproof . Do not expose this product to Rain or Moisture. If you don't use the UH047SX for long periods, Uniden recommend removing the batteries. The UH047SX is designed to retain the previous user settings. This feature will continue to use a small amount of batter y power while ...
-
Uniden uh012sx - page 16
INST ALLING THE CHARGE CRADLE 1. Plug the AC adaptor into the rear of the charge cradle and into the mains power . UH047SX 2. Place the UH047SX into the charge cradle. The charge light will come on to indicate the unit is charging. 3. Before operating the , charge the batter y pack for 16 hours. Do not charge alkaline or non rechargeable batteries. ...
-
Uniden uh012sx - page 17
BEL T CLIP LOW BA TTERY ALERT T o attach the belt clip: T o remove the belt clip: Slide the belt clip until it snaps into place. T o remove the belt clip, press and hold belt clip locker , slide the belt clip at the same time until released. If the batter y level becomes low , the batter y indicator icon on the display begins flashing. When the bat ...
-
Uniden uh012sx - page 18
OPERA TION POWER ON/OFF VOL UME ADJUSTING THE KEY BEEPS ROGER BEEP 1. Press and hold key to turn the radio on. A channel number will appear on the display . 2. Press and hold key to turn the radio off . 1. Press or key to increase or decrease the volume level. ‘VOL ’ icon appears on the display while volume is being adjusted. There are 8 volume ...
-
Uniden uh012sx - page 19
(6) SELECTING A CHANNEL 1. Press key momentarily to activate channel select mode. The displayed channel will flash. 2. Press or key to select the desired channel. 3. Press key momentarily to exit channel select mode. If no button is pressed within 5 sec the UH047SX will exit from the channel select mode. The UH047SX uses the 40 UHF-CB Channels ( ). ...
-
Uniden uh012sx - page 20
AUTOMA TIC S QUELCH FEA TURE MONITOR The UH047SX is equipped with an Automatic Squelch System which shuts off weak transmissions and unwanted noise. This feature enables users to listen for weak signals on the current channel at the press of a button. 1. Press button. The icon will flash. 2. Release within 1.5 seconds and the unit exits Monitor mod ...
-
Uniden uh012sx - page 21
(8) REPL Y DELAY While scanning, the UH047SX stops at a busy channel and receives a transmission. When the received signal is over , the unit will wait for 2 seconds for the return of the signal, other wise, the radio resumes scanning. 1. Press key six times. appears on the display . 2. Press or to change to . 3. Press to confirm T o deactivate the ...
-
Uniden uh012sx - page 22
CTC SS & DC S (Continuous T one Coded Squelch System) (Digital Coded Squelch) & CTC SS DCS is a digital extension of CTC S S. It provides 104 extra, digitally coded, squelch codes that follow after the 38 CTC SS codes. CTC S S 1- 38, followed by DCS 1-99 plus DC S 100-104 (represented by o0- o4 on the display). is a feature that allows a gr ...
-
Uniden uh012sx - page 23
(10) VOX VOX is the automatic transmitting function by inputting voice into the VOX headset mic without pressing the PTT button. 1. Press key momentarily twice while in standby mode to enter VOX Sensitivity mode. select/ The current selected VOX setting will flash on the display . 2. Press or key to adjust the VOX sensitivity . 1 is the highest sen ...
-
Uniden uh012sx - page 24
(11) PRIORITY SCAN CHANNEL T o set a priority scan channel: PRI 1. Press momentarily four times while in standby mode to enter Priority Scan Channel mode. The current priority channel will be indicated. 2. Press or key to increase or decrease the desired channel number . 3. Press three times to confirm and exit to standby mode. will be displayed wh ...
-
Uniden uh012sx - page 25
UHF CB CHANNELS & FREQUENCIES Simplex Mode Duplex Mode Simplex Mode CH No. T ransmit / Receive T ransmit CH No. T ransmit/Receive F requency (MHz) F requency (MHz) Frequency (Mhz) 1 476.425 477.175 CH31 21 476.925 2 476.450 477.200 CH32 22 476.950 (RX only) 3 476.475 477.225 CH33 23 476.975 (RX only) 4 476.500 477.250 CH34 24 477.000 5 476.525 ...
-
Uniden uh012sx - page 26
(13) CTC S S & DC S Code List ...
-
Uniden uh012sx - page 27
W ARRANTY UNIDEN UH047SX UHF CB RADIO Limited One Y ear W arranty Please keep your sales docket as it provides evidence of warranty. W arrantor: W arranty only available in original countr y of purchase. Elements of W arranty: W arranty Duration: Parts Covered: Accessories: Procedure for Obtaining P erformance or Warranty: UNIDEN AUSTRALIA PTY LIMI ...
-
Uniden uh012sx - page 28
© 2005 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UTZZ01929ZA(0) ...
¿Tienes una pregunta acerca de Uniden uh012sx?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Uniden uh012sx, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Uniden uh012sx probablemente compartirá una forma de solucionarlo.