-
Epson 821P - page 1
Epson PowerLite 821p Projector 9/04 Epson PowerLite 821p Pro jector - 1 Projector Parts Specifications General Type of display Poly-silicon TFT active matrix Lens F=1.75 to 2.42, focal length=24 to 38.2 mm Resolution 1024 × 768 pixels (native format) Color Full color, 16.8 million colors reproduction Brightness 2600 lumens (High brightness mode) ( ...
-
Epson 821P - page 2
Epson PowerLite 821p Projector 2 - Epson PowerLite 82 1p Projector 9/04 Electrical Rated frequency 50/60 Hz Power supply 100 to 120 VAC, 3.2 A 200 to 240 VAC, 1.6 A Power Operating: 280 W consumption Standby: 5 W Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH ...
-
Epson 821P - page 3
Epson PowerLite 821p Projector 9/04 Epson PowerLite 821p Pro jector - 3 Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. ❏ Place the projector on a stur dy, level surface, between 2.8 and 48.3 feet from the screen. ...
-
Epson 821P - page 4
Epson PowerLite 821p Projector 4 - Epson PowerLite 82 1p Projector 9/04 The P Power light on top of the projector turns orange, indicating that the projector is receiving power but not yet turned on. Wait until the light stops flashing, but stays lit orange. 3. Press the P Power button on top of the projector or on the remote control. The projector ...
-
Epson 821P - page 5
Epson PowerLite 821p Projector 9/04 Epson PowerLite 821p Pro jector - 5 Selecting the Image Source If multiple devices are connected to the projector, the easiest way to select the image source is to press the Source Search button on either the projector or remote control until the correct image is projected. You can also press one of the following ...
-
Epson 821P - page 6
Epson PowerLite 821p Projector 6 - Epson PowerLite 82 1p Projector 9/04 Adjusting the Image Shape The projector automatically correc ts images that are distorted when the projector is tilted up or down (up to a 15° tilt). The Keystone window appears on the screen while the projector makes the correction. If the projected image still isn’t rectan ...
-
Epson 821P - page 7
Epson PowerLite 821p Projector 9/04 Epson PowerLite 821p Pro jector - 7 Sleep Mode When the projector has not re ceived any input signals for 30 minutes, it automa tically turns off the pr ojector lamp and enters “sleep mode.” This co nserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector ...
-
Epson 821P - page 8
Epson PowerLite 821p Projector 8 - Epson PowerLite 82 1p Projector 9/04 Changing the Image’s Aspect Ratio If you’re projecting a wide scre en format image, you can use the Resize button on the remote control to change the aspect ratio. Follow these steps: 1. Press the Resize button once to change the aspect ratio to 16:9 for wide screen format. ...
-
Epson 821P - page 9
Epson PowerLite 821p Projector 9/04 Epson PowerLite 821p Pro jector - 9 Using Password Protection If you assign a password for the projector, a screen app ears requesting the password whenever you turn on the projector. If you enter the password incorrectl y three times in succession, the projector’s operation is locked . Disconnect the projector ...
-
Epson 821P - page 10
Epson PowerLite 821p Projector 10 - Epson PowerLite 821p Projecto r 9/04 Starting the Projector with a Password Caution: If you lose the remote control, you will no t be able to enter the password; so keep the r emote control in a safe place at all times. When the password fu nction is enabled, you see this screen when you turn on the projector: Ho ...
-
Epson 821P - page 11
Epson PowerLite 821p Projector 9/04 Epson PowerLite 821p Projec tor - 11 Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. ❏ Use a canister of compressed air to remove dust. ❏ To remove dirt or smears on the lens, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner a nd gently wipe the l ...
-
Epson 821P - page 12
Epson PowerLite 821p Projector 12 - Epson PowerLite 821p Projecto r 9/04 4. If you need to replace the filter, slide it off as shown. 5. Align the new filter carefully as you slide it in until it clicks into place. Replacing the Lamp The projection lamp typically lasts for about 2000 hours of use (in high brightness mode) or 3000 hours (in low brig ...
-
Epson 821P - page 13
Epson PowerLite 821p Projector 9/04 Epson PowerLite 821p Projec tor - 13 Warning: This product includes a lamp component that contains mercury (Hg). Please consult you r state and local regulations r egarding disposal or recycling. Do not put it in the trash. 7. Gently insert the new lamp. If it doesn’t fit easily, make sure it’s facing the cor ...
-
Epson 821P - page 14
Epson PowerLite 821p Projector 14 - Epson PowerLite 821p Projecto r 9/04 Optional Accessories Epson provides the following optional accessories for the PowerLite 821p: Related Documentation CPD-18615 Epson PowerLite 821p User’s Guide CPD-18614 Epson PowerLite 821p Quick Setu p Product Part number Replacement lamp V13H010L30 Air filter set (includ ...
¿Tienes una pregunta acerca de Epson 821P?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Epson 821P, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Epson 821P probablemente compartirá una forma de solucionarlo.