-
PYLE Audio Mobile Audio System PLMR18 - page 1
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Ster eo Radio • Automatic Memory Storing • Pr eset Equalization • USB Interface • Auxiliary Input Function • Remote Contr ol PLMR18 www .pyleaudio.com ...
-
PYLE Audio Mobile Audio System PLMR18 - page 2
Installation ........................................3 T ake out screw befor e installation......3 DIN Front-Mount (Method A) .............3 Installing the unit ............................3 Removing the unit...........................4 DIN Rear -Mount (Method B) ..............5 Wiring Connection ...........................6 Operation ............. ...
-
PYLE Audio Mobile Audio System PLMR18 - page 3
3 Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly . • Use only the parts included with the unit to ensure pr oper ...
-
PYLE Audio Mobile Audio System PLMR18 - page 4
6 . Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appr opriate tabs behind the dashboard to secur e the sleeve in place. 7. Reconnect the wire ha ...
-
PYLE Audio Mobile Audio System PLMR18 - page 5
5 Dashboard or Console Side view showing Screw Holes marked T , N Factory Radio Mounting Bracket Screw Screw DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (T oyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets ...
-
PYLE Audio Mobile Audio System PLMR18 - page 6
WIRING CONNECTION 6 FRONT Lch SPEAKER GREEN GREEN/BLACK MEMORY BACK-UP (B+) MAIN UNIT IGNITION SWITCH (ACC+) POWER ANTENNA RED GROUND (B–) YELLOW BLACK BLUE RCA CABLE ANTENNA CONNECTOR (GREY) Rch RED Lch WHITE WHITE WHITE/BLACK REAR Lch SPEAKER VIOLET VIOLET/BLACK GREY GREY/BLACK FRONT Rch SPEAKER REAR Rch SPEAKER FUSE FUSE ...
-
PYLE Audio Mobile Audio System PLMR18 - page 7
7 OPERA TION LOCA TION OF KEYS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 23 18 24 25 ...
-
PYLE Audio Mobile Audio System PLMR18 - page 8
8 OPERA TION FM1 FM2 FM3 AM • SWITHCHING ON/OFF THE UNIT Switch on the unit by pressing any button. When system is on, press button (1) to turn off the unit. • SOUND ADJUSTMENT Press SEL button (3) shortly to select the desired adjustment mode. The adjustment mode will change in the following order: By rotating the audio knob (3) it is possible ...
-
PYLE Audio Mobile Audio System PLMR18 - page 9
It supports the MP3/WMA file in the device, the operation please refer to the following instruction. • SELECTING TRACKS IN SINGLE STEP Press button (24) or button(2) to move to the previous track or the following track. T rack number shows on display . • SELECTING TRACKS IN SINGLE STEP Press M5 button (16) or M6 button (15) to select directory ...
-
PYLE Audio Mobile Audio System PLMR18 - page 10
OPERA TION 10 name are displayed (selected). The user can select the directory or file in the directory by volume knob.The selected file can be played by pressing BND/LOU/ENT button. • DISPLA Y INFORMA TION Press DISP button (9) to show following information, such as the clock, ID3 T AG (if available: song title, directory name, artist name, othe ...
-
PYLE Audio Mobile Audio System PLMR18 - page 11
11 OPERA TION SUPPORTED MP3/WMA DECODING MODES The main unit supports MP3/WMA (Windows Media Audio) decoding modes as below . Supports Mode Stereo Stereo Standard MPEG1 Audio Layer 3 (44.1kHz) Windows Media Audio (44.1kHz) Bit Rate (kbps) 32, 48, 64, 96, 128, 192, 256, 320 64, 96, 128, 192 The USB solution can support: 1. Folder: 500 max. 2. File: ...
-
PYLE Audio Mobile Audio System PLMR18 - page 12
12 GENERAL P o wer Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output P ow er : 4 x 40 Watts Current Drain : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 45 ...
-
PYLE Audio Mobile Audio System PLMR18 - page 13
TROUBLE SHOOTING 13 Before going thr ough the checklist, check wiring connection. If any of the pr oblems persist after checklist has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is not on. connected to the car accessory circuits, but the engine is not moving, swit ...
-
PYLE Audio Mobile Audio System PLMR18 - page 14
8800-0C3023-02 ...
¿Tienes una pregunta acerca de PYLE Audio Mobile Audio System PLMR18?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con PYLE Audio Mobile Audio System PLMR18, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con PYLE Audio Mobile Audio System PLMR18 probablemente compartirá una forma de solucionarlo.