-
AT&T TL72408 - page 1
User’s manual TL72108/TL72208/ TL72308/TL72408 5.8 GHz cor dless tel ephone/answering syst em with caller ID/call waiting ...
-
AT&T TL72408 - page 2
Congr atulations on your pur chase of this A T&T product. Befor e using this A T&T product, please read the Import ant safety inf ormation on pages 65-67 of this manual. Please thor oughly r ead this user’s manual for all the feat ure oper ations and troubl eshooting information nec essary to install and operate your new A T&T product ...
-
AT&T TL72408 - page 3
User’ s manu al TL721 08/TL7 2208/ TL723 08/TL7 2408 5.8 GHz cor dle ss tel epho ne/an sweri ng sy stem with calle r ID/c all w aiting User's manual Quick start guide Quick start guid e TL721 08/TL7 2208/ TL723 08/TL7 2408 5.8 GHz cor dle ss tel epho ne/an sweri ng sy stem with calle r ID/c all w aiting T elephone line cord Power adapter for ...
-
AT&T TL72408 - page 4
User’s manual TL72108/TL72208/ TL72308/TL72408 5.8 GHz cor dless tel ephone/answering syst em with caller ID/call waiting Getting s tarted Quick ref erence guide handset .............................................. 2 telephone base .............................. 3 Installation prepar ation ................... 4 T elephone base & charger ins ...
-
AT&T TL72408 - page 5
CID Press to display call er ID information (page 34). DIR Pr ess to dis pla y d ir ect ory en tr ies (page 28). PH ONE /FL ASH Pr ess to mak e or answ er a ca ll. Duri ng a ca ll, pr ess t o re cei ve an inc omin g c all if c all wa itin g i s ac tiv at ed (page 15). MUTE/REMOVE During a call, pre ss to mute micr ophone (page 16). While revi ewing ...
-
AT&T TL72408 - page 6
3 IN USE On when handset is in use, when the answering system is answering an incoming call or when you are registering a handset. Flashes when another telephone is in use on the same line or when you are deregistering handset(s) from the telephone base. Flashes quickly when there is an incoming call. • • • VOICEMAIL Flashes when you have new ...
-
AT&T TL72408 - page 7
S T OP! Avoid placing the t elephone base t oo close to: • Communication devices such as: television sets, VCRs, or other cordless t el ep ho ne s. • Ex ce ss iv e h ea t so ur ce s. • No i se so ur c e s su ch a s a w in do w wi th tr a ff ic ou ts id e, m ot or s, m i cr o w a v e o ve ns , r ef ri g er a t or s , o r fl uo r es c en t li g ...
-
AT&T TL72408 - page 8
Getting st arted T elephone base & char ger installation If you subscribe to high-speed Internet servic e (Digital Subscriber Line - DSL) through your t elephone lines, you must install a DSL fil ter between the telephone base and the tel ephone wall jack. The filter will pr event noise and caller ID probl ems caused by DSL interf erence. Pleas ...
-
AT&T TL72408 - page 9
Getting st arted Bat t ery inst allation & char ging Install the battery as shown below . After installing the battery , you can make and r eceive short calls, but r eplace the handset in the telephone base or additional char ger when not in use. F or optimal performance, charge the handset batt ery for at least 16 hours before use. When fully ...
-
AT&T TL72408 - page 10
Getting st arted Belt clip & optional headset Plug a 2.5 mm headset into the jack on the side of the handset. Lift the rubber flap her e. Side of handset. For handsfree headset conversations, use any industry standar d 2.5 mm headset (pur chased separat ely). For best results, use an A T&T 2.5 mm headset. T o purchase a headset, visit our w ...
-
AT&T TL72408 - page 11
WALL WALL DESK DESK Getting st arted Install ation options NOTE: The mounting brack et must be used for both tabletop and wall mounting positions. The tel ephone base comes with the mounting bracket already install ed for desktop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required. This mounting ...
-
AT&T TL72408 - page 12
2. Plug the telephone line cor d and power adapter into the telephone base. Bu nd le t he t el ep ho ne l in e co rd a nd p ow er a da pt e r co r d , an d se cu r e th em w it h a tw is t ti e be fo re p la ci ng them in the bracket channels. 4. Plug the power adapter and tel ephone line cord int o the wall outlets, then align the mounting studs o ...
-
AT&T TL72408 - page 13
DESK DESK DESK DESK Getting st arted Install ation options W all mount to desktop inst all a tion T o change the t elephone base from the wall mount position to desktop position. 1. Make sure that you unplug the power adapter and telephone line cord from the wall outlets before you begin. 2. U n ti e th e bu nd l e d t el ep h o n e c or d a nd p o ...
-
AT&T TL72408 - page 14
4. Plug the telephone line cor d into the telephone base and telephone wall jack, then plug the power adapter plug into the t elephone base and an electrical wall outlet not contr olled by a wall switch (see page 5) and place the cords in the br acket channels. 11 Getting st arted Install ation options W all mount to desktop inst all a tion (contin ...
-
AT&T TL72408 - page 15
Handset oper ation Making a call T o m ak e a c al l: • Pr es s P H O N E / F L AS H o r S PE AK E R , t he n en t er th e te le ph on e nu mb er . T o e nd a c al l: • Pr es s OF F / CL EAR o r r et u r n th e ha nd se t to t h e t el ep ho ne b a s e or c ha r ge r . The screen displays the elapsed time as you talk (in hours, minutes and seco ...
-
AT&T TL72408 - page 16
Handset oper ation Auto off A ca ll w il l be e nd ed a ut om a ti ca ll y wh en y ou p u t t he ha nd se t in t he t el ep ho ne b as e or c ha r ge r . Las t number r edial T o view the five most recently dialed numbers: • Press REDIAL /P AUSE to display the most recentl y called number (up to 30 digits). • Press , or REDIAL /P AUSE repeatedl ...
-
AT&T TL72408 - page 17
Handset oper ation Handset locat or Th e ha nd se t lo ca to r f ea tu r e is u se fu l i f yo u mi sp la ce a h an ds et . T o s t a rt t he p ag in g to ne : • Pr es s H A ND SE T L O CA T OR a t th e t el e p ho ne b as e. T h i s st ar ts t h e pa gi ng t o ne a t th e h an ds et ( s ) fo r 60 s ec on ds t o he lp y ou l oc a t e th e h an ds ...
-
AT&T TL72408 - page 18
Options while on calls V olume contr ol P r es s t he V OL UM E k ey s o n th e si de o f th e ha nd se t t o ad ju st l is t en in g vo l u me . Ea ch p r e ss o f th e bu tt on i nc r ea s es o r de cr e a s es t he v o lu me . NO TES : 1. Al l vol um e s et tin gs ( nor ma l hand set , spe ak erp hone an d he ad set ) ar e i nde pe nd ent . 2. W ...
-
AT&T TL72408 - page 19
Options while on calls Mute The mute function allows you to silence the microphone. You can hear the caller, but the caller will not be able to hear you. To mute the call: • Press MUTE/ REMOVE to silence the microphone. When mute is on, the handset screen will show MUTED for a few seconds and the MUTE icon will be shown until mute is turned off. ...
-
AT&T TL72408 - page 20
T elephone oper ation 17 Chain dialing This featur e allows you to initiat e a dialing sequence from number s stored in the dir ectory, caller ID history or r edial list while you ar e on a call. Chain dialing can be useful if you wish to ac cess numbers other than phone numbers (such as bank account information or ac cess codes) fr om the director ...
-
AT&T TL72408 - page 21
Int er com Use th e i nter com fe at ur e f or c onv ersa tio n bet wee n h andse ts. (Thi s f eatur e is no t a vaila ble on mod el TL721 08. ) Mod els TL 722 08/ TL723 08/ TL7 240 8 1. Pr e s s IN T . T he s cr ee n wi ll s ho w I NT ER C OM T O: 2. En te r a ha nd se t nu mb er . T he s cr ee n wi ll s ho w CA LL IN G HA ND SE T X . Th e ca ll e ...
-
AT&T TL72408 - page 22
Call tr ansfer using int er com Use the intercom feature to transfer an outside call from one handset to another. (Th is fe at ur e is not a vai lable on mode l T L72 108 .) Models TL72208/TL72308/TL72408 1. During a conversation with an outside call, press INT . The outside call is automatically placed on hold and TRANSFER TO: is displayed on the ...
-
AT&T TL72408 - page 23
T elephone oper ation 20 Handset set tings Using the featur e menu, you can change settings to customiz e how the telephone works. 1. Press MENU/ SELE CT in idle mode (when the phone is not in use) to enter the f eature menu. 2. Use or to scroll t o the feature to be changed. When scrolling thr ough the menu, the top menu item is alwa ys highlighte ...
-
AT&T TL72408 - page 24
T elephone oper ation 21 Handset set tings Ringer tone Th is fe atu re al lo ws y ou t o cho os e one of 1 0 rin ger t on es. T o cho os e a r ing er t on e: 1. Press MENU/ SELECT in idl e mode to enter the featur e menu. 2. Us e or to scroll t o the > RINGER T ONE menu, then press MENU /SELE CT . 3. Pr es s or t o sa mpl e ea ch ri ng er to ne. ...
-
AT&T TL72408 - page 25
22 T elephone oper ation Handset set tings Language In th is m enu , y ou c an se le ct t he lan gu ag e u sed f or al l s cr een d is pla ys . T o sel ec t a la ngu age : 1. Press MENU/ SELECT in idl e mode to enter the featur e menu. 2. Use or to scroll t o the > LANGUA GE menu, then press MENU /SELE CT . 3. Pr es s or t o se le ct EN GLI SH , ...
-
AT&T TL72408 - page 26
T elephone oper ation 23 Handset set tings Visual message waiting (voic email) indicator If you subscribe to a voic email service offer ed by your local tel ephone company , the voicemail waiting indicator featur e will provide visual indication when you have new voic email messages. The VOICEMAIL light on the telephone base will flash, and NEW V O ...
-
AT&T TL72408 - page 27
24 T elephone oper ation Handset set tings T emporary ring silencing Press OFF/ CLEAR or MUTE/ REM OV E while the telephone is ringing to sil ence the ringer temporaril y . This will silence the ringer without disconnecting the call. The next inc oming call will ring normally at the preset v olume. NOTE: If more than one handset is installed, each ...
-
AT&T TL72408 - page 28
25 Pat Williams 555-1234 Dir ect ory Shar ed dir ectory The directory is st ored in the telephone base, and is shared by all handsets. Changes made t o the directory on an y one handset will apply to all. NOTE: Only one handset can review the directory at a time. If another handset attempts to use the directory , the scr een will display NOT AV AIL ...
-
AT&T TL72408 - page 29
26 Dir ectory New dir ect ory entries T o creat e and stor e a new dir ectory entry 1. Press MENU/ SELECT in idl e mode to enter the featur e menu. 2. Press MENU /SELE CT again to enter the > DIRECT ORY menu. 3. Press t o highlight ST ORE. 4. Press MENU /SELE CT . 5. Enter the telephone number when pr ompted. • Use the dial pad to enter up t o ...
-
AT&T TL72408 - page 30
Dir ectory 27 New dir ect ory entries 7. Enter the name when prompt ed. • Use th e dia l pad to ente r a na me (u p to 15 char act ers) . Each time a k ey is pr essed, the char acter on that k ey wi ll be displa yed. Ad dition al k ey pre sses w ill p rod uce other ch arac ter s on that k ey . See the c hart b elow . – Press or t o move the cur ...
-
AT&T TL72408 - page 31
28 Dir ectory Dir ect ory r eview T o review dir ectory entries 1. Press DIR in idle mode t o display the first listing in the directory . DIRECT ORY EMPTY will be displayed if ther e are no dir ectory entries. -OR- Y ou can also display the first listing in the directory b y first pressing MENU/ SELE CT twice, then press MENU /SELE CT again to cho ...
-
AT&T TL72408 - page 32
29 Dir ectory Dir ect ory sear ch T o search by name 1. Press DIR in idle mode t o display the first listing in the direct ory. DIRECT ORY EMPTY will be displayed if ther e are no dir ectory entries. 2. When a name entry is displayed, pr ess the dial pad keys (2-9) t o start a name search. The directory will display the first name beginning with th ...
-
AT&T TL72408 - page 33
30 Dir ectory T o dial, delete or edit entries T o dial, delete or edit a directory entry (name and number), the entry must be displayed on the handset. Use directory sear ch or review (pages 28-29) to display an entry . Display dial T o dial a displayed number from the direct ory, press PHONE /FLASH or SPEAKER . T o delete an entry When a director ...
-
AT&T TL72408 - page 34
Caller ID operation 31 NOTE : Caller ID features will work only if both you and the caller are in areas offering caller ID service, and if both telephone companies use c ompatible equipment. The time and dat e ar e sent by the t elephone company along with the call information. Caller ID oper ation Informa tion about caller ID with call waiting Th ...
-
AT&T TL72408 - page 35
32 Caller ID operation Caller ID oper ation How the caller ID his tory (call l og) works The caller ID history stor es information about the last 50 incoming calls. Review the caller ID history to find out who called, t o easily return the call, or to copy the call er’s name and number into your dir ectory . The caller ID history delet es the old ...
-
AT&T TL72408 - page 36
Caller ID operation 33 HANDSET 1 6 MISSED CALLS Caller ID oper ation Memory match If the incoming telephone number e xactly matches a telephone number in y our direct ory , the name that appears on the screen will mat ch the corresponding name in y our directory . For e xample, if Christine Smith calls, her name will appear as Chris if this is how ...
-
AT&T TL72408 - page 37
Caller ID operation 34 HA ND SE T 1 6 MISSED CALLS Pat Williams 555-1234 Chris Thompson 908-555-0100 Jeffrey Adams 555-9876 NEW 10:21 AM 11/23 NEW 10:11 AM 11/23 NEW 10:31 AM 11/23 555-5555 555-555-5555 1-555-555-5555 1-555-5555 The various dialing options are: Caller ID hist ory To review caller ID his tory 1. Press CID to review the caller ID his ...
-
AT&T TL72408 - page 38
35 Caller ID operation Caller ID hist ory • Pr ess ME NU / SE LE CT to c op y t his en tr y int o you r di re ct or y . Y ou wil l be gi ve n the o pp ort uni ty t o ed it th e nam e o r t he n umb er (p ag e 3 0) if t hey ar e not pr o vi ded . • Press O FF / CLE AR t o exit the caller ID history . NOTE : If both the name and number ar e not p ...
-
AT&T TL72408 - page 39
36 Answering system oper ation A bo u t th e an s w er in g s y s t e m Answering sys tem and voic email Y our telephone has both a digital answering system and voic email indication. V oicemail is offered b y your telephone servic e provider (fees may apply). Y our telephone’s answering system and voic email indication are independent featur es. ...
-
AT&T TL72408 - page 40
Answering system oper ation 37 A bo u t th e an s w er in g s y s t e m The answering system can r ecor d up to 99 messages, depending on the length of each message. Individual messages can be up to four minutes long, and the tot al maximum r ecording time is 14 minutes. Messages will remain available for r eplay until you delete them. If F is flas ...
-
AT&T TL72408 - page 41
Answering system oper ation 38 Day & time announcement T o check day & time Y ou can press CL OCK when the system is idle t o hear the current day and time. If you subscribe to caller ID servic e from your local telephone c ompany , the time will automatically be set with every inc oming call. Y ou must set the year so that the day of the w ...
-
AT&T TL72408 - page 42
39 Answering system oper ation Answering syst em mode Unless you change it, the answering system will be on, that is, ready to record messages. You can turn the answering system off, but if you do so, the answering system will not answer calls and record incoming messages. T o turn the answering system on or off: • Press ANSWER ON to turn off you ...
-
AT&T TL72408 - page 43
Answering system oper ation 40 Out going announcements Outgoing announcements ar e the messages callers hear when calls ar e answered by the answering system. The telephone has a pr erecor ded outgoing announcement: “ Hello. Please lea ve a message after the t one. ” Y ou can use this announcement, or replace it with y our own recor ding. T o p ...
-
AT&T TL72408 - page 44
Answering system oper ation 41 Out going announcements T o delete your out going announcement 1. Press ANNC . Y ou will hear “ Announcement. Press PLA Y or press REC ORD ." 2. Press PLA Y /S TOP t o begin playback. 3. Press DELETE during playback to delet e your announcement, "Announcement delet ed." will be announced. Press ANNC. ...
-
AT&T TL72408 - page 45
Answering system oper ation NOTE: To adjust the voice prompt volume, press VOLUME . 42 Answering syst em setup You can change the number of rings, telephone base ringer volume, remote access code and message alert tone. To change the answering system setup: 1. Press SETUP repeatedly to hear the settings for different features. 2. When you hear the ...
-
AT&T TL72408 - page 46
Answering system oper ation 43 Answering syst em setup Number of rings Y ou can set the answering system to answer an incoming call aft er two, four , or six rings. Y ou can also select toll saver , which is explained below . Unless you change it, the answering syst em answers an incoming call aft er four rings. To set the number of rings: 1. Press ...
-
AT&T TL72408 - page 47
Answering syst em setup Base ringer volume You can set the volume to high or low, or turn the base ringer off. Unless you change it, the telephone base ringer volume is set to low. To change the setting: 1. Press SETUP twice. The system will announce “Base ringer,” followed by the current setting, and then “To change the setting press SKIP or ...
-
AT&T TL72408 - page 48
Answering syst em setup Message alert tone When the message alert tone is set to On , and there is at least one new message, the telephone base will beep every 10 seconds. Unless you change it, the message alert tone is set to off. To change the setting: 1. Press SETUP four times. The system will announce "Message alert tone," followed by ...
-
AT&T TL72408 - page 49
Answering system oper ation 46 Message playback Press PLAY /STOP to hear messages. The system announces the number of messages, then begins playback. If you have new messages, you will hear only the new messages (oldest first). If there are no new messages, the system will play back all messages (oldest first). Before each message, you will hear th ...
-
AT&T TL72408 - page 50
Answering system oper ation R ecor ding & playing memos Memos are messages you r ecord yourself . They are saved, pla yed back and deleted exactly lik e in co mi ng m es sa ge s. Y ou c an r ec or d a m em o as a reminder to your self, or lea ve a message for so me on e el se w ho u se s th e an sw er in g sy st em . T o record a memo: 1 Pr es ...
-
AT&T TL72408 - page 51
Answering system oper ation Message count er displays Th e me ss ag e co un te r u su al ly d is pl ay s th e t ot al nu mb er o f an sw er in g sy st em m e ss ag es . Se e th e t a b l e be lo w fo r ot he r me ss ag e co un t er d is pl a ys . Message count er displays 0 No messages. 0 (flashing) The clock needs to be set (page 38). 1-99 T otal ...
-
AT&T TL72408 - page 52
Answering system oper ation 49 R emote ac cess You can access your answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely access your answering system: 1. Dial your telephone number from any touch- tone telephone. 2. When the system answers, enter the two digit remote access code ( 19 is the defau ...
-
AT&T TL72408 - page 53
R emote ac cess * 7 Press to r ecord a new announcement. 0 Press to t urn the answering system on or off . 8 Press to end r emote access (the call will be terminated). 4. Hang up to end the call and save all undeleted messages. Cu t ou t th e re mo te a cc es s w a ll et c ar d at th e ba ck of t hi s us er ’s m an ua l fo r qu ic k re fe r e nc ...
-
AT&T TL72408 - page 54
Appendix Scr een icons, indicat or lights & t ones 51 One beep every 10 seconds Message alert. Scr een icons & al er t t ones Ringer off. Battery char ging (animated display). Low batt ery (flashing); place handset in telephone base or charger to r echarge. Microphone is muted. Missed and un-reviewed calls. T wo short beeps VO L UM E ke ys ...
-
AT&T TL72408 - page 55
Appendix Handset display scr een messages 52 PHONE The handset is in use. DIRECTORY EMPTY You ar e accessing an empty dir ectory . MUTED The microphone is muted. LOW BATTERY The batt ery needs to be rechar ged. INCOMING CALL There is a call coming in. ENDED Y ou have just ended a call. CALL LOG EMPTY You ar e accessing an empty caller ID history . ...
-
AT&T TL72408 - page 56
Appendix Handset display scr een messages 53 Scr een display messages Failed int ercom or conf erence call (there are alr eady two handsets being used). UNABLE TO CALL TRY AGAIN Someone else is already using the directory or call log when y ou try to do so. NOT AVAILABLE AT THIS TIME Mute has just been turned off so your voice is again being sent o ...
-
AT&T TL72408 - page 57
54 Appendix Adding and r egist ering handsets Your telephone can accommodate up to four cordless handsets. You can add new handsets (TL70008, sold separately) to the TL72108/TL72208/TL72308 at any time, but each new handset must be registered with the telephone base before use. Each handset must be registered separately. The handset provided with y ...
-
AT&T TL72408 - page 58
55 Appendix R eplacing a handset Y ou may need to de-r egister your handsets if: Y ou have four regist ered handsets and need t o replace a handset. -OR- Y ou wish to change the designated handset number of your regist ered handsets. Y ou must first de-register ALL the handsets, and then r e-register each handset you wish to use. Please r ead care ...
-
AT&T TL72408 - page 59
56 Appendix T r oubleshooting If you have diffi cul ty with you r tel ephon e, ple ase try the sugg est ion s belo w. Fo r Cus to mer Ser vic e, visit our websi te at www .t el ephon es.a t t.c om , or call 1 (800 ) 22 2–31 11 . In Canad a di al 1 (86 6) 288- 426 8 . My phone doesn’t work at all. • Make sure the power cor d is securely plugge ...
-
AT&T TL72408 - page 60
Appendix 57 C ONNECTING... displays on my cordl ess handset. • Ensure that the telephone base is powered up. • Place the cordless handset in the tel ephone base for one minute to allow the c ordless handset and base t o resynchr onize channels. • Move the cordless handset closer t o the telephone base. Y ou might have moved out of range. • ...
-
AT&T TL72408 - page 61
58 Appendix T r oubleshooting The batteries will not hold a charge. • If the cordless handset is in its tel ephone base or charger and the char ge light does not come on, re fer to The char ge light is off in this T roubl eshooting guide. • Charge the battery in the cor dless handset for at least 16 hours. For optimum dail y performance, r etur ...
-
AT&T TL72408 - page 62
59 Appendix T r oubleshooting • If your phone is plugged in with a modem or a surge protect or, plug the phone (or modem/sur ge prot ector) into a differ ent location. If this doesn’t solve the problem, r e-locate your phone or modem farther apart from one another , or use a different sur ge prot ector . • Relocate your phone to a higher l oc ...
-
AT&T TL72408 - page 63
Appendix 60 • If the other phones in your home are having the same problem, the pr oblem is in your wiring or local service. Contact your local t elephone company (char ges may apply). • Test a working phone at the phone jack. If another phone has the same problem, the pr oblem is the phone jack. Contact your local t elephone company (char ges ...
-
AT&T TL72408 - page 64
Appendix 61 The charge light is off. • Make sure the power and line cor ds are plugged in correctl y and securely . • Unplug the unit’s electrical power. W ait for 15 seconds, then plug it back in. Allow up to one minute f or the cordl ess handset and telephone base to r eset. • Clean the cordless handset and tel ephone base charging contac ...
-
AT&T TL72408 - page 65
62 Appendix Incomplete messages. • If a caller leaves a very long message, part of it may be lost when the system disc onnects the call after f our minutes. • If the caller pauses for more than seven seconds, the system st ops recor ding and disconnects the call. • If the system’s memory becomes full during a message, the system st ops reco ...
-
AT&T TL72408 - page 66
Appendix 63 S y s t e m d o e s n o t r e s p o n d t o r e m o t e c o m m a n d s . • Make sure to ent er your remot e access code correctl y (see pages 49-50). • Make sure you ar e calling from a t ouch-tone phone. When you dial a number , you should hear tones. If you hear clicks, the phone is not a touch-tone t elephone and cannot activate ...
-
AT&T TL72408 - page 67
64 Appendix Maint enanc e T aking care of your t elephone Y our cordless tel ephone contains sophisticated el ectronic parts, so it must be treated with car e. Avoid r ough treatment. Place the handset down gently . Save the original packing materials t o prot ect your telephone if you ev er need to ship it. Avoid wat er Y our telephone can be dama ...
-
AT&T TL72408 - page 68
Appendix Important saf ety inf ormation This symbol is to alert y ou to important operating or servicing instructions that may appear in this user’s manual. Always f ollow basic safety precautions when using this pr oduct to reduc e the risk of injury , fire, or electric shock. Safety inf ormation Read and unders tand all instructions in the user ...
-
AT&T TL72408 - page 69
Appendix Important saf ety inf ormation Especially about cor dless telephones: Privacy: The same featur es that make a cordless t elephone convenient create some limit ations. Telephone calls ar e transmitted between the telephone base and the handset by r adio waves, so ther e is a possibility that your cor dless telephone conv ersations could be ...
-
AT&T TL72408 - page 70
Appendix Important saf ety inf ormation Pr ecautions for users of implant ed cardiac pac emakers Cardiac pacemak ers (applies only to digital cor dless telephones): Wir eless T echnology Research, LL C (WTR), an independent resear ch entity , led a multidisciplinary evaluation of the interf erenc e between portable wir eless telephones and implant ...
-
AT&T TL72408 - page 71
Appendix F CC P art 68 and A CT A T hi s eq u i pm e n t c om p li e s w i t h P ar t 6 8 of t he F C C r ul e s a n d w i th t ec h ni c a l r e q ui r em e nt s a d o pt e d b y t he A dm i n is t r a t iv e Co u nc i l f o r T e rm i na l A t t a ch m e nt s ( A C T A ) . T h e l a be l on th e ba c k o r bo t t o m o f t h i s e qu i p me n t c ...
-
AT&T TL72408 - page 72
69 Appendix F CC P art 68 and A CT A I f t h is p r o du c t h a s m e mo r y d i a li n g l o ca t i on s , y o u m a y ch o o se t o s t o r e e m e r g en c y t el e ph o ne n um b e rs (e . g ., p ol i ce , f i r e , m e d ic a l ) i n t h es e lo c at i o ns . If y ou do s to r e o r t es t e m e r ge n c y n u mb e r s, pl e as e : R e m ai n ...
-
AT&T TL72408 - page 73
Appendix F CC P art 15 This equipment has been tested and f ound to comply with the r equirements for a Class B digital device under P art 15 of the Federal Communications Commission (FC C) rules. These requir ements are int ended to provide reasonable pr otection against harmful interferenc e in a residential inst allation. This equipment generate ...
-
AT&T TL72408 - page 74
Appendix Limit ed warr anty Th e A T& T b r an d is u se d un de r li ce ns e - an y r ep ai r , re pl ac em e nt o r wa r r an ty se rv ic e, a nd a ll q ue st io ns a bo ut t hi s pr od uc t sh ou ld b e di r e ct e d t o: I n th e Un it ed St at e s of A me ri ca , vi si t ww w . t e l ep ho n e s . at t .c o m o r ca ll 1 (8 00 ) 22 2- 3 1 ...
-
AT&T TL72408 - page 75
Appendix Limit ed warr anty Wh at i s no t co ve r ed b y th i s l im it ed w a rr a nt y? T hi s li m i t ed w ar ra nt y d oe s no t c o ve r : PR OD UC T th at h as b ee n su bj ec t ed t o mi su s e, a cc id en t, s hi pp in g or o th er ph ys ic al d am ag e, i mp r o pe r in st al la ti on , ab no rm al o pe ra ti on or h an d l in g, ne gl e ...
-
AT&T TL72408 - page 76
Appendix Limit ed warr anty W h a t mu st y ou r e tu rn w i t h t h e P R OD U C T t o ge t wa rr an ty s er v i c e? Y ou m u s t : Return the entir e original package and cont ents including the PRODUCT to the service l ocation along with a description of the malfunction or difficulty; and Include “valid proof of pur chase” (sales receipt) i ...
-
AT&T TL72408 - page 77
Index 74 T echnical specifications Channels 95 Operating temperat ure 32°F — 122°F 0°C — 50°C T elephone base voltage (AC voltage, 60Hz) 96 — 130 Vrms T elephone base voltage (AC adapter output) 9VDC @600mA Handset voltage 3.2 — 4.7 VDC 550mAh Charger volt age (AC adapter output) 9VDC @200mA Replacement batt ery 3.6V 600mAH 5.8 GHz digi ...
-
AT&T TL72408 - page 78
75 Index A AC adapter , 5 Alert tones, 51 Answering calls, 12 Answering system, 36-50 Auto off , 13 B Battery char ging, 6 Battery inst allation, 6 Belt clip, 7 C Call interc ept, 39 Call screening, 39 Call transfer using int ercom, 19 Call waiting, 15 Caller ID (CID), 31 a d d e n t r ie s t o p h on e d ir ec t o ry , 35 delete entries, 34 dial e ...
-
AT&T TL72408 - page 79
Index 76 T T echnical specifications, 74 T elephone base installation, 5 T elephone operating range, 74 T roubleshooting, 56-63 V Voic email, 3, 51 Voic email waiting indicator , 22 Voic e prompts, 37 Volume c ontrols, 15, 20 Inde x ...
-
AT&T TL72408 - page 80
Action Remot e command Play all messages .................. 1 Play new messages ............... 2 Delete the message .............. 3 Delete all old messages ..... 33 Repeat or go back ................. 4 Stop ............................................... 5 Help menu ................................. *5 Skip the message ................... 6 Reco ...
-
AT&T TL72408 - page 81
www .tel ephones.at t.com © 2008 Advanced American T elephones. All rights reserved. A T&T and the A T&T logo are trademarks of A T&T Intellectual Property II, L.P . d/b/a A T&T Intellectual Property lic ensed to Advanced American T elephones. Printed in China. Issue 5 A T&T 10/08. ...
¿Tienes una pregunta acerca de AT&T TL72408?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con AT&T TL72408, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con AT&T TL72408 probablemente compartirá una forma de solucionarlo.