Español dropdown-ico

Manual de instrucciones Craftsman 486.248381

40 de páginas 3.88 mb
Descargar

Pasar a la página of 40

Summary
  • Craftsman 486.248381 - page 1

    Operator's Manual TRA CT OR A TT A CHMENT Model No. 486.248381 42"- 2 ST A GE SNO W THR O WER ® PRINTED IN U .S.A. FORM NO . 40242 (REV . 12/13/07) Sears, Roeb uc k and Co ., Hoffman Estates, IL 60179 U .S.A. www .sears.com/craftsman CA UTION: Bef ore using this product, read this manual and f ollo w all Saf ety Rules and Operating Instr ...

  • Craftsman 486.248381 - page 2

    2 T ABLE OF CONTENTS MODEL NUMBER: 486.248381 SERIAL NUMBER: __________________ D A TE OF PURCHASE: __________________ The model number and serial numbers will be f ound on a decal attached to the snow thro wer . Y ou should record both the serial number and the date of purchase and keep in a saf e place f or future ref erence. A CCESSORIES AND A T ...

  • Craftsman 486.248381 - page 3

    3 SAFETY Any po wer equipment can cause injur y if operated improperly or if the user does not understand how to operate the equipment. Ex ercise caution at all times, when using pow er equipment. • Readthisowner'smanualcarefullyandkno whowto operate y our snow throw er and how to stop the unit and disengage the ...

  • Craftsman 486.248381 - page 4

    4 G A D F K L M N O S H I BB Y C CC E AA P U W, X V DD QQ KK R EE FF II HH GG NO T SHO WN A CTU AL SIZE SHO WN A CTU AL SIZE JJ J Q PP LL MM OO Z T NN B RR TT SS HARD W ARE P A CKA GE CONTENTS ...

  • Craftsman 486.248381 - page 5

    5 REF . QTY . DESCRIPTION REF . QTY . DESCRIPTION X 3 W asher , 3/8" Y 2 Bow ed W asher Z 6 Flanged Nut, 1/4" AA 1 Flanged Nut, 5/16" BB 12 Flanged Nut, 3/8" CC 21 Nylock Nut, 5/16" (2 spare parts) DD 2 He x Lock Nut, 3/8" EE 1 Nylock Nut, 1/2" FF 1 T ar p Strap GG 1 Spr ing HH 3 Chute K eeper II 1 T runnion JJ 2 ...

  • Craftsman 486.248381 - page 6

    6 1. Cross Brace (W eight T r ay) 2. Side Braces (2) (W eight T r ay) 3. Left Hand Side Plate 4. Right Hand Side Plate 5. Anti-rotation Brac ket 6. Engagement Rod (Not used on some models) 7. Suspension Ar ms (2) 8. Engine Pulley K eeper (Not used on some models) 9. Chute Crank Rod Assemb ly 10. Suppor t T ube, Crank Rod 11. Lift Handle and Cable 1 ...

  • Craftsman 486.248381 - page 7

    7 • Remov eallpar tsandhardwarepac kagesfromthe car ton. Lay out par ts and hardware and identify using the illustrations on pages 4 and 6. NO TE: Not all of the supplied par ts and hardware will be needed f or your par ticular tractor . Unneeded items ma y bediscardedafteryouha v ecompletedassembly ...

  • Craftsman 486.248381 - page 8

    8 STEP 4: (SEE FIGURE 4) • Assemble a shoulder bolt (P) and a 3/8" w asher (X) to the outside of R.H. side plate, securing it with a 3/8"angednut(BB). RepeatforL.H. sideplate. FIGURE 4 RIGHT SIDE VIEW FIGURE 3 RIGHT SIDE VIEW 5/16" NYLOCK NUT (CC) 5/16" x 1" CARRIA GE BOL T (N) ENGINE MOUNTING P ...

  • Craftsman 486.248381 - page 9

    9 3/8" X 3-1/4" HEX BOL T (B) LARGE SP A CER (SS) PULLEY (TT) 3/8" LOCKW ASHER (S) 3/8" HEX LOCK NUT (DD) 3/8" W ASHER (X) LONG END OF HUB STEP 7: (SEE FIGURE 7) • Attachthepulley(longendofhubf acingdo wn)and the large spacer (SS) to the hole shown in the clutch/ idler assembly . Use a 3/8 ...

  • Craftsman 486.248381 - page 10

    10 A TT A CH CLUTCH IDLER ASSEMBL Y T O TRACT OR STEP 12: (SEE FIGURE 12) • Attachtheclutch/idlerassemblytothetr actorframe.  Hook the notched suspension ar ms onto the two shoulder bolts (Q) assembled to the outside of the tractor frame . Lift the front of the assembly and attach ittotheR.H. andL.H. h ...

  • Craftsman 486.248381 - page 11

    11 THIS SECTION IS FOR TRA CT ORS WITH AN ELECTRIC A TT A CHMENT CLUTCH STEP 14: (SEE FIGURE 14) • Attachthetwosuspensionarmstotherearofthe clutch/idler assembly using tw o 5/16" x 3/4" hex bolts (E) and 5/16" nyloc k nuts (CC) f or each arm. Place the ar ms on the outside of the frame with the notc ...

  • Craftsman 486.248381 - page 12

    12 STEP 19: (SEE FIGURE 18) • Attachtheclutch/idlerassemblytothetr actorframe.  Hook the notched suspension ar ms onto the two shoulder bolts (Q) assembled to the outside of the tractor frame . Lift the front of the assembly and attach ittotheR.H. andL.H. hangerbrac ketsusingtw opivot lo ...

  • Craftsman 486.248381 - page 13

    13 STEP 22: (SEE FIGURE 21) • F astentheR.H. SidePlate(bendfacingout)tothe front three holes shown in the tractor fr ame using three 3/8" x 1" thread f or ming bolts (G), three 3/8" lock w ashers (S) and one 1/2" washer (V) placed on the third bolt as a shim between the side plate and the fr ...

  • Craftsman 486.248381 - page 14

    14 FIGURE 28 RIGHT SIDE VIEW INST ALLING HANGER BRACKETS F orbetterclearance,lo werthetractor'ssuspensionarms usingtheattachmentliftle ver . STEP 26: (SEE FIGURE 25 or 26) On T ractors With Foot Rest Brackets • Remov etheboltandnutthatf astentheL.H. andR.H.  f oot rest brac ...

  • Craftsman 486.248381 - page 15

    15 INST ALLING CLUTCH/IDLER ASSEMBL Y Thissectioncov erstheinstallationoftheClutch/Idler assembly to tr actors with attachment clutches that are either rod operated (p . 15), cable operated (p . 17) or electric (p. 19). Use the appropr iate instructions for y our tractor . ROD OPERA TED MANU AL A TT ACHMENT CLUTCH STEP 29: ( ...

  • Craftsman 486.248381 - page 16

    16 FIGURE 33 RIGHT SIDE VIEW FIGURE 32 RIGHT SIDE VIEW PIV O T LOCK PIN (MM) (use second hole) 1/8" HAIRPIN CO TTER (KK) ENGA GEMENT ROD STEP 33: (SEE FIGURE 33) • Makesuretheattachmentclutchle v eronthedash panel is in the disengaged (down) position. • Pivottheupperidlerarmsothatitr ...

  • Craftsman 486.248381 - page 17

    17 FIGURE 36 FIGURE 38 STEP 36: (SEE FIGURE 36) • Assemblethecab lebrac kettotheinnerhalfofthe double holes in the bottom of the clutch/idler assemb ly using two 5/16" x 3/4" carriage bolts (O) and 5/16" nyloc k nuts (CC). Use the front holes in the cable brac ket if y our tractor has a 42" mow ...

  • Craftsman 486.248381 - page 18

    18 FIGURE 40 VIEWED FROM UNDERNEA TH FIGURE 39 STEP 40: (SEE FIGURE 40) • Assembletheshort"V"beltontotheenginepulley and then onto the large pulley on top of the clutch/idler assembly . The belt must be placed to the inside of the engine pulley k eeper , the idler pulle y and the keeper bolt located beside ...

  • Craftsman 486.248381 - page 19

    19 ELECTRIC A TT ACHMENT CLUTCHES FIGURE 42 TENSIONING CHAIN (PP) LEFT FRONT HOLE FIGURE 43 VIEW OF BO TT OM STEP 43: (SEE FIGURE 43) • Hookthespringfromthepar tsbagthroughtheendof the tensioning chain. • Hooktheotherendofthespringontothebottomof the bolt and nut which secu ...

  • Craftsman 486.248381 - page 20

    20 FIGURE 46 VIEWED FROM UNDERNEA TH 1/8" HAIRPIN CO TTER (KK) ENGINE PULLEY ENGINE PULLEY KEEPER BOL T IDLER PULLEY CHAIN (PP) (L.H. SIDE) STEP 47: (SEE FIGURE 46) • Assemblethedriv ebeltontotheenginepulleyand then onto the large pulley on top of the clutch/idler assembly . The belt must be placed to the inside ...

  • Craftsman 486.248381 - page 21

    21 STEP 48: (SEE FIGURE 47) • Pla cet he lift ha ndle int ot hel ift br ac k eto nt herig ht side of the sno w thro w er . F a sten the ha ndle to the br ac k et usi ng t wo 5/1 6" x 1- 3/4" he x bol ts ( D) and 5/16 " N yloc k nuts (CC). FIGURE 48 RIGHT SIDE VIEW LIFT RELEASE CABLE HEX NUT LO ...

  • Craftsman 486.248381 - page 22

    22 5/16" NYLOCK NUT (CC) CHUTE CRANK BRA CKET 5/16" W ASHER (U) CHUTE CRANK ROD ROD SUPPORT BRA CKET 5/16" x 1" CARRIA GE BOL T (N) SPIRAL FIGURE 51 LEFT SIDE VIEW FIGURE 52 RIGHT SIDE VIEW CHUTE KEEPER (HH) ANTI-RO T A TION BRA CKET 1/4" FLANGED LOCK NUT (Z) 1/4" FLA T W ASHER (T) 1/4" x 1" HEX BOL T (F) PLA ...

  • Craftsman 486.248381 - page 23

    23 NO TE: Anadditionalperson'shelpma yberequiredto mount the snow thro wer to the front of the tractor . STEP 55: (SEE FIGURE 54) • Placethetractorandsnowthro weronaat,le v el surf ace so that the tractor can be rolled f orward to attach the snow thro wer . • Remov ethe? ...

  • Craftsman 486.248381 - page 24

    24 INST ALLING THE A TT A CHMENT PIN STEP 58: (REFER B A CK TO FIGURE 54 ON P A GE 23) • Liftthefrontofthesnowb lowertoaligntheholesin the mounting plates and the side plates. F rom the left side of the tractor inser t the attachment pin through the holes. Secure it with by reinstalling the 1/8" hairpin ...

  • Craftsman 486.248381 - page 25

    25 A TT ACHING T O (GT) GARDEN TRACT ORS WITH A SINGLE FRONT DECK SUSPENSION BRA CKET STEP 61: (SEE FIGURE 59) • Locatethe upper empty hole in the right side of the tractor'sdra wbar . Inser ta3/8"x1"hexbolt(C)from inside the tractor frame through the hole . Hook the slotted end of a sid ...

  • Craftsman 486.248381 - page 26

    26 CHECKLIST Before y ou operate y our snow thr ower , please revie w the follo wing chec klist to help ensure that you will obtain the best performance fr om y our snow thr ower . • Makesureallassemb lyinstructionshav ebeen completed with all bolts and nuts properly tightened. • Makesurethecorrectdriv e? ...

  • Craftsman 486.248381 - page 27

    27 OPERA TION KNO W Y OUR SNO W THRO WER Read this owner's manual and saf ety rules before operating y our snow thr ower . Comparetheillustrationbelowwithy oursnowthro wertof amiliarizey ourselfwiththevariouscontrolsandtheirlocations. CHUTE TIL T HANDLE PivotstheUpperChuteup? ...

  • Craftsman 486.248381 - page 28

    28 RAISING AND LO WERING • T oraise,pushdo wnonthelifthandleuntilthesnow throw er locks in the raised tr anspor t position. • T olower ,pushdownslightlyonthelifthandleandpull the trigger . With the trigger pulled, slowly lo wer the snow thro wer until it reaches the ground. ...

  • Craftsman 486.248381 - page 29

    29 SER VICE AND ADJUSTMENTS CA UTION : B e f or e s e rv i c in g  o r a d j u s ti n g t he  s n o w  t hr o we r ,  s h ut  o f f t h e  e ng i n e ,   re m o v e t he s p a rk p lu g w i re ( s ) , s e t t he p a rk i n g b r a k e andremov etheke yfromthetractorignition. FIGURE 65 FIGU ...

  • Craftsman 486.248381 - page 30

    30 P ARTS T O REMO VE A T END OF SEASON • Remov etheclutch/idlerassembly . (Thetwohanger brac kets and the two shoulder bolts ma y be left attached to the tractor frame .) • Remov ethedrivebeltfromtheenginepulle y . • Ifyoureplacedtheenginepulle ykeeperonaman ual ...

  • Craftsman 486.248381 - page 31

    31 NO TES ...

  • Craftsman 486.248381 - page 32

    32 NO TES ...

  • Craftsman 486.248381 - page 33

    33 NO TES ...

  • Craftsman 486.248381 - page 34

    34 P ARTS REP AIR P ARTS FOR MODEL 486.248381 42" SNO W THR O WER ...

  • Craftsman 486.248381 - page 35

    35 REP AIR P ARTS FOR MODEL 486.248381 42" SNO W THR O WER REF . P AR T QTY . DESCRIPTION NO . NO . 1 05931 1 Housing, Bearing 2 65701 1 Housing Assembly 3 71464 1 Gear Assembly 4 63579 1 Chute Crank Rod Assemb ly 5 63768 1 Impeller Assembly 6 24773 1 Scraper Plate 7 25982 1 Shaft, A uger Gearbox 8 703-2735A 1 Brac ket, Chute Crank  9 24 ...

  • Craftsman 486.248381 - page 36

    36 REP AIR P ARTS FOR MODEL 486.248381 42" SNO W THR O WER 73 36 60 76 61 65 75 62 11 65 75 75 62 63 32 33 ...

  • Craftsman 486.248381 - page 37

    37 REF . P ART QTY . DESCRIPTION NO . NO . 1 64637 1 Lift Shaft Assembly 2 710-0865 2 Hex Bolt, 1/2-13 x 1" 3 710-0367 2 Hex Bolt, 5/8-11 x 1-1/2" 4 711-0332 2 Pin, Brack et Lift 5 712-0261 2 Nut, Hex Loc k 5/8-11 Thread 6 43262 6 Nut, Hex Loc k 1/2-13 8 142 5 Pin, Cotter 1/8" x 3/4" 9 43093 1 Pin, Cotter 1/8" x 1-1/2" ...

  • Craftsman 486.248381 - page 38

    38 REP AIR P ARTS FOR MODEL 486.248381 42" SNO W THR O WER REF . P AR T QTY . DESCRIPTION NO . NO . 1 43080 2 Carriage Bolt, 5/16-18 x 3/4" 2 43064 3 He x Lock Nut, 5/16-18 3 43083 2 Hex Nut, 5/16-18 4 43086 4 Loc k W asher , 5/16" 5 43081 4 W asher , 5/16" Std. Wr t. 6 25727 1 F r ame, Clutch and Pulle y 7 63904 1 Idler Arm Ass ...

  • Craftsman 486.248381 - page 39

    39 WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not operate on slopes greater than 10 degrees. Make turns gradually to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes. Braking may be affected by tractor attachment. Reduce speed on slop ...

  • Craftsman 486.248381 - page 40

    ® Regist ered Trademark / TM Trademark / SM Serv ice Mark of Sears Br ands, LLC ® Marca Registr ada / TM Mar ca de Fábrica / SM Marca de Serv icio de Sears Br ands, LLC MC Marque de commerce / MD Marque dépo sée de Sears Bra nds, LLC © Sears Brands, LLC Get i t f i xed, at your home or ours! Your Home For repair – in your home – of all ma ...

Fabricante Craftsman Categoría Snow Blower

Los documentos del dispositivo Craftsman 486.248381 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Craftsman
- manuales de instrucciones 486.248381
- hojas de producto Craftsman
- folletos informativos
- o etiquetas energéticas Craftsman 486.248381
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Craftsman 486.248381.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Craftsman 486.248381, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Craftsman 486.248381. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Craftsman 486.248381.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Craftsman 486.248381, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Craftsman 486.248381. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Craftsman 486.248381.

El manual de instrucciones completo de Craftsman debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Craftsman 486.248381 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Craftsman 486.248381, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Craftsman 486.248381 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Craftsman 486.248381 - que deben facilitarnos los primeros pasos durante el uso de Craftsman 486.248381
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Craftsman 486.248381
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Craftsman 486.248381 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Craftsman 486.248381?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Craftsman 486.248381, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Craftsman 486.248381 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)