-
JVC LT-20B70BJ - page 1
LCD PANEL TV INSTRUCTIONS LT-20B70BJ ...
-
JVC LT-20B70BJ - page 2
Dear Customer, This apparatus is in conformance with the valid European directives and standar ds regarding electromagnetic compatibilit y and electrical safety. European representative of Victor Company of Ja pan, Limited is: JVC Technology Centre Europe GmbH Postfach 10 05 52 61145 Friedberg Germany ENGLISH ...
-
JVC LT-20B70BJ - page 3
Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your hom e or the cable is too short to reach a pow er point, then obtain a n appropriate safety approve d extension lead or adaptor or consult your dea ler. If nonetheless the mains plug is cut off, remove the fuse and dispose ...
-
JVC LT-20B70BJ - page 4
1 Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV , please read this manual thoroughly before you begin. (“LCD” stands fo r Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SH OCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING • Fingers may be trapped under the TV ca ...
-
JVC LT-20B70BJ - page 5
2 Failure to take the following precaution s may cause dama ge to the televis ion or remote control. DO NOT block the TV’s vent ilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc. , the heat may not be able to get out.) DO NOT place anything on top of the TV. (such as cosmetics or me dicine s ...
-
JVC LT-20B70BJ - page 6
3 Cleaning the screen The screen is coated wi th a special thin film to reduce reflection. If this film is damaged, uneven colors, discoloration, scratches, and other pr oblems that cannot be re paired may occur. Pay attention to the following when handling the screen. • Do not use glue or adhesive tape on the screen. • Do not write on the ...
-
JVC LT-20B70BJ - page 7
4 CONTENTS Setting up your TV ............. .............. ........5 Installation ........... ........... ............. ........... .... 5 Using the sta nd . .......... ............. .............. .... 5 Connecting the aerial and video cassette recorder ( VCR) .............. .......... ............. .. 6 Connecting the power cord to the AC outlet. ...
-
JVC LT-20B70BJ - page 8
5 Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is instal led on the wall by a skilled installer. Installation Cautions for installatio n • Install the TV in a corner on a wall or on th e floor so as to keep cords out of the way. ? ...
-
JVC LT-20B70BJ - page 9
6 Setting up your TV Connecting the aerial and vide o cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. Caution • Turn off all the equ ipment including the TV before co nnecting anything. • Aerial cable is not supplied. Use a good quality ...
-
JVC LT-20B70BJ - page 10
Setting up your TV 7 Connecting the power cord to the AC outlet Insert the AC plug on the power co rd from the TV into an AC outlet. Caution • Operate only from the power source specified (AC 220 – 240 V, 50/60 Hz) on the unit. • Remove the AC plug from the out let to completely disconnec t the TV from the power supply. Putting the batteries ...
-
JVC LT-20B70BJ - page 11
8 Setting up your TV 2 Press the 2 and 3 buttons to choose English. Then press the 4 button The on-screen display wi ll then be in English. 3 Press the 2 and 3 buttons to choose the country wh ere you are. Then pres s the 4 button When your country is selected, th e Sound System will cha nge automatica lly to suit. 4 Press the PICTURE/OK or 3 butto ...
-
JVC LT-20B70BJ - page 12
9 TV buttons and functions Refer to the pages in parentheses for details. 1 Remote contro l sensor 2 Power lamp (pag e 7) 3 (Stand by) button (page 9) 4 P buttons (page 9) 5 (Volume) buttons (page 10) 6 TV/AV/OK button (page 9) 7 MENU button (pages 10, 18) 8 Headphone jack (mini jack) (page 29) Turn the TV on from standby mode Press the button to t ...
-
JVC LT-20B70BJ - page 13
10 TV buttons and functions Adjust the volume Press the (Volume) buttons The volume level indica tor appears. Using the Menu Use the MENU button Refer to “Using the TV’s menu” (see page 18) for details of using the menu. ...
-
JVC LT-20B70BJ - page 14
11 Remote control buttons and functions 1 Muting button 2 Number butt ons 3 ZOOM button 4 button 5 (Text) button 6 AV button 7 2 / 3 / 1 / 4 buttons 8 P buttons 9 buttons 0 Information button - (Standby) button = Colour buttons ~ PICTURE/OK button ! MENU button @ (Volume) buttons # VCR/DVD/Teletext control buttons $ Stereo/Bilingual button % VCR/TE ...
-
JVC LT-20B70BJ - page 15
12 Remote control b uttons and functions Use the P buttons: Press the P buttons to choose the Programme numb er (Pr.) you want Use the AV button: Press the AV button to ch oose an EXT terminal • If you choose an EXT terminal with no input signal, the EX T terminal name becomes fixed on the screen. • If you do not have a clear picture or ...
-
JVC LT-20B70BJ - page 16
Remote control buttons and functions 13 ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. Auto: When a WSS (Wide Screen S ignalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, t ...
-
JVC LT-20B70BJ - page 17
14 Remote control b uttons and functions Sleep Timer function You can set the TV to automatically turn off after a set period of time. Press the yellow button several times to turn on the Sl eep Timer function and set the p eriod of time You can set the period of time for up to 120 minutes (2 hours) in 10 minute steps. To cancel the Slee p Timer fu ...
-
JVC LT-20B70BJ - page 18
Remote control buttons and functions 15 Picture Mode function You can choose one of the Picture Modes to adjust the picture settings automatically. Press the PICTURE/OK b utton several times to select a suitable Picture Mode Bright: Heightens contrast and sharpness. Standard: Standardizes picture adjustment . Soft: Softens contrast and sharpness. M ...
-
JVC LT-20B70BJ - page 19
16 Teletext function Basic operation 1 Choose a TV chan nel with a teletext broadcast 2 Set the VCR/TELETEXT/DVD switch to the (TELETEXT) position 3 Press (Text) button to display the tele text Pressing (Text) butto n changes the mode as follows: 4 Choose a teletext page by pressing the P buttons, number buttons or co lour buttons To return to the ...
-
JVC LT-20B70BJ - page 20
Teletext function 17 Size You can double the height of the teletext display. Press the (Size) button Index You can return to the index page instantly. Press the (Index) button Returns to page 100 or a previously specified page. Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page numb er, or press a ...
-
JVC LT-20B70BJ - page 21
18 Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understan d the basic menu operating techniques fully. Buttons used to operate the menus Basic operation 1 Press the MENU button to display the menu 2 Press the 1 and 4 buttons to choose the menu you want to use and ...
-
JVC LT-20B70BJ - page 22
19 Picture menu • In the Picture menu, the last setting mad e for each item is memorised. Picture Mode You can choose one of the Picture Modes to adjust the picture settings automatically or customise your own Picture Mode by adjusting the Pi cture settings. Bright: Heightens contrast and sharpness. Standard: Standardizes picture adjustment . Sof ...
-
JVC LT-20B70BJ - page 23
20 Picture menu Low: The TV will automatically ad just the level of the Noise Reduction effect to matc h the amount of noise in the picture, giving you the best possible picture. • If you set the Noise Reduction effect too high it can make the pi cture less sharp. It is recommended you use the Low sett ing if you can. If you set the Noise Reducti ...
-
JVC LT-20B70BJ - page 24
21 Sound menu • In the Sound menu, the last setting made for each item is memorised. Bass You can adjust the low tone of the sound. 2 : weaker 3 : stronger Treble You can adjust the high tone of the sound. 2 : weaker 3 : stronger Balance You can adjust the volume balance between the left and right speaker. 2 : decrea se the right sp eaker’s vol ...
-
JVC LT-20B70BJ - page 25
22 Install menu Auto Program You can again perform the Auto Pro gram function TV channel au tomatic r egistration which was performed in the “Initial settings (Setup tour)” (page 7). 1 Choose Auto Program, then pr ess the PICTURE/OK or 3 button The Auto Program menu appears. 2 Press the 2 and 3 buttons to choose the country wh ere you are, then ...
-
JVC LT-20B70BJ - page 26
Install menu 23 3 Press the 4 button to choose Program, then pres s the 2 an d 3 buttons to choose a Programme number (Pr.) for a new TV channel 4 Press the 4 button to choose Frequency, th en press the 2 an d 3 buttons to search for a TV chan nel Scanning stops when the TV finds a TV channel. Then the TV channel is displayed. • If you know the e ...
-
JVC LT-20B70BJ - page 27
24 Install menu 3 Press the 2 and 3 buttons to move the cursor, and pre ss the 1 and 4 buttons to choose each char acter of the channel name 4 Press the PICTURE/OK button to store the name Swap 1 Press the 2 and 3 buttons (or the number buttons) to choose a Programme number (Pr.), then press the 4 butto n to choose Swap 2 Press the number butto ...
-
JVC LT-20B70BJ - page 28
Install menu 25 Colour System The colour system is chosen automatica lly. However, if the picture is not clear or no colour appears, choose the colour system manually. Choose Colour System, th en press the 2 and 3 buttons to choose the appropriate colour system PAL: PAL system SECAM: SECAM system NTSC3.58: NTSC3.58 MHz system NTSC4.43: NTSC4.43 MHz ...
-
JVC LT-20B70BJ - page 29
26 Feature menu • In the Feature menu, the last setting made for each item is memorised. Language The Language setting which was performed in the “Initial settings (Setup tour)” (page 7) Press the 2 and 3 buttons to choose a language Aspect Ratio You can change the screen size according to the picture aspe ct ratio. For de tails about the Asp ...
-
JVC LT-20B70BJ - page 30
27 PC Setting menu • This menu is only available when the TV is displaying a computer screen. For details about how to display a computer screen, see “Dis playing a comput er screen” on page 28. • In the PC Setting m enu, the last se tting made for each item is memori sed. Auto If you shift the picture horizontally or vertically to an unwan ...
-
JVC LT-20B70BJ - page 31
28 Displaying a computer screen This TV can be us ed as a computer screen. Connecting to the computer Use a D-SUB cable to connect the TV’s PC IN RGB terminal to the computer’s analogue RGB output terminal. If you want to listen to the sound from the computer, use an audio cable to connect the TV’s PC IN AUDIO terminal to the computer’s sou ...
-
JVC LT-20B70BJ - page 32
29 Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct connections. Before connectin g anything: • Read the manuals that cam e with the equipment. Depending on the equipment, the connection method may be differen t from the diagram. Also, the equipme nt settings may need to change depending on ...
-
JVC LT-20B70BJ - page 33
30 Additional preparation ...
-
JVC LT-20B70BJ - page 34
Additional preparation 31 Equipment which can output the composite signal such as a VCR Connect the equipment to the EXT-1, EXT-2 or EXT-3 terminal. Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-V HS VCR Connect the equipment to the EXT-2 or EXT-3 terminal. Connecting headphone s Connect the headphones wi th a ...
-
JVC LT-20B70BJ - page 35
32 Troubleshooting If a problem arises while you are using the TV, pl ease read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is di sconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV ...
-
JVC LT-20B70BJ - page 36
Troubleshooting 33 If the TV does not respond to the remote control • Have the batteri es of the rem ote con trol worn out? Follow the descript ion “Putting the batte ries into the remote control” on page 7 and replace them with new batteri es. • Have you attempted to use th e remote control from the sides or rear of the TV or from more ...
-
JVC LT-20B70BJ - page 37
34 Specifications We may change the design and specific ations without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public plac es (cafes, hotels, etc.) without the consent of the owners of copyright of the or iginal picture sources, as this would be an ...
-
JVC LT-20B70BJ - page 38
4J.06701 .001 ...
¿Tienes una pregunta acerca de JVC LT-20B70BJ?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con JVC LT-20B70BJ, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con JVC LT-20B70BJ probablemente compartirá una forma de solucionarlo.