-
Goodman Mfg IO-431 - page 1
© 2007 - 2012 Goodman Manufacturing Compa ny , L.P . 5151 San Felipe, Suite 500, Houston, TX 77056 www .goodmanmfg.com - or - www .amana-hac.com P/N: IO-431 Date: May 2012 ASPF AIR HANDLERS INSTALLATION & OPERATING INSTRUCTIONS RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION. A TTENTION INST ALLING PERSONNEL Prior to installation, thoroughly fami ...
-
Goodman Mfg IO-431 - page 2
2 Important Safety Instructions The following symbols and labels are used throughout this manual to indicate immediate or potential safety hazards. It is the owner’s and installer’s responsibility to read and com- ply with all safety information and instructions accompanying these symbols. Failure to heed safety information increases the risk o ...
-
Goodman Mfg IO-431 - page 3
3 IMPORTANT: To register your Goodman ® brand unit, go to www.goodmanmfg.com and click on “Warranty Registration”. Complete registration as prompted. To register your Amana ® brand unit, go to www.amana- hac.com and click “Warranty Registraion”. Complete regis- tration as prompted. Product limited warranty certificates for models currentl ...
-
Goodman Mfg IO-431 - page 4
4 Return Ductwork DO NOT TERMINATE THE RETURN DUCTWORK IN AN AREA THAT CAN INTRODUCE TOXIC, OR OBJECTION- ABLE FUMES/ODORS INTO THE DUCTWORK. The return ductwork is to be introduced into the air handler bottom (upflow configuration). Return Air Filters Each installation must include a return air filter. This filtering may be performed at the air ha ...
-
Goodman Mfg IO-431 - page 5
5 H I G H V O LTA G E ! Fail ure to do so may cause prop ert y dama ge , pe r s o n a l i n ju r y or dea t h . Dis connec t ALL pow er befor e s ervi cing. Multiple p ower sourc es may be present. HIG H VOL T A GE! T o avoid prope rty dama ge , persona l injury or death du e to elect ri ca l sho c k, th is uni t MU S T ha ve an ele c trical ground ...
-
Goodman Mfg IO-431 - page 6
6 Low Voltage Connections Several combinations of low voltage schemes are available, depending on the presence of a heat kit and whether the heat kit is single-stage or multi-staging. The low voltage con- nections are determined by whether the outdoor unit is a con- denser or heat pump. The 24V-control voltage connects the air handler to the room t ...
-
Goodman Mfg IO-431 - page 7
7 Downflow Conversion Conversion to downflow MUST be performed in an area that allows access to all sides prior to placing the air handler in its final location. To prevent the evaporator coil pan from “sweat- ing” the DPI accessory insulation kit is to be used when per- forming this conversion. NOTE : The DPI kit is not supplied with this prod ...
-
Goodman Mfg IO-431 - page 8
8 ASPF Model Insulation Kit 1830 DPI H36-42 3137 / 42 60 DPIH48-6 1 Table 8 The following describes converting to “Horizontal Left-Hand”. Conversion MUST be performed in an area that allows ac- cess to all sides prior to placing the air handler in its final location ( See Figure 6 ). PRIM ARY DRAIN SECOND ARY DRAIN DPIH K I T Figure 6 1. Remove ...
-
Goodman Mfg IO-431 - page 9
9 Use of a condensate removal pump is permitted when nec- essary. This condensate pump should have provisions for shutting off the control voltage should a blocked drain occur. A trap must be installed between the unit and the conden- sate pump. IMPORTANT NOTE: The evaporator coil is coated with oils that may dissolve styrofoam and certain types of ...
-
Goodman Mfg IO-431 - page 10
10 ASPF Thermostat Connections NOTES: 1) OUTDOOR THERMOSTAT (OT-1) SHOULD BE THE FIRST TO CLOSE AND THE LAST TO OPEN. 2) JUMPER W1 AND W2 TOGETHER IF OT-2 IS NOT USED. 3) REMOVE WIRE WHEN USING OUTDOOR THERMO- STAT. NOMENCLATURE: OT - OUTDOOR THERMOSTAT (OPTIONAL) EHR - EMERGENCY HEAT RELAY (OPTIONAL) COLOR CODES RD - RED YL - YELLOW BL - BLUE BR - ...
-
Goodman Mfg IO-431 - page 11
11 HIGH VOL T AGE ! DIS CO NNE CT A LL POW ER BE FO RE SERV ICI NG. MUL TIPLE PO WE R S OURC ES MA Y B E P RES EN T . F AILUR E T O DO SO MA Y C AU SE PR OPERT Y DA MAGE , P ER SON AL I NJU R Y OR DE A TH . WA R N I N G Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring. YG W W2 R COOLIN G U N ...
-
Goodman Mfg IO-431 - page 12
12 Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring. HIGH VOL T AGE ! DIS CO NNE CT A LL POW ER BE FO RE SERV ICI NG. MUL TIPLE PO WE R S OURC ES MA Y B E P RES EN T . F AILUR E T O DO SO MA Y C AU SE PR OPERT Y DA MAGE , P ER SON AL I NJU R Y OR DE A TH . WA R N I N G G C R HEA T PUMP UNIT ...
-
Goodman Mfg IO-431 - page 13
13 HIGH VOL T AGE ! DIS CO NNE CT A LL POW ER BE FO RE SERV ICI NG. MUL TIPLE PO WE R S OURC ES MA Y B E P RES EN T . F AILUR E T O DO SO MA Y C AU SE PR OPERT Y DA MAGE , P ER SON AL I NJU R Y OR DE A TH . WA R N I N G Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring. ASPF Wiring Diagram BK ...
-
Goodman Mfg IO-431 - page 14
14 THIS P AGE LEFT INTENTIONALL Y BLANK ...
-
Goodman Mfg IO-431 - page 15
15 SPLIT SYSTEMS AIR CONDITIONING AND HEA T PUMP HOMEOWNER’S ROUTINE MAINTENANCE RECOMMENDA TIONS We strongly recommend a bi-annual maintenance checkup be performed before the heating and cooling seasons begin by a qualified servicer . Replace or Clean Filter IMPORTANT NOTE: Never operate unit without a filter in- stalled as dust and lint will bu ...
-
Goodman Mfg IO-431 - page 16
16 © 2007 - 2012 Goodman Manufacturing Company , L.P . 5151 San Felipe, Suite 500, Houston, TX 77056 www .goodmanmfg.com - or - www .amana-hac.com NOTE: SPECIFICATIONS AND PERFORMANCE DATA LISTED HEREIN ARE SUBJECT TO CHANGE WITHOUT NOTICE. ...
¿Tienes una pregunta acerca de Goodman Mfg IO-431?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Goodman Mfg IO-431, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Goodman Mfg IO-431 probablemente compartirá una forma de solucionarlo.