-
Harbor Freight Tools 40072 - page 1
AIR ST APLER 1/4 ” CROWN, 18 GAUGE Models 40072 / 40073 / 97521 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2007 by Harbor Freight T ools ® . All rights reserved. No portion of t ...
-
Harbor Freight Tools 40072 - page 2
Page 2 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year o ...
-
Harbor Freight Tools 40072 - page 3
Page 3 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 W ARNING – When using tools, basic precautions should always be followed, including the following: General T o reduce the risks of electric shock, a. re, and injury to persons, read all the instructions before using the tool. W ork area Keep the work ...
-
Harbor Freight Tools 40072 - page 4
Page 4 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 T ool use and care Use clamps or another practical way a. to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and can lead to loss of control. Do not force the tool. b. Use the correct tool for ...
-
Harbor Freight Tools 40072 - page 5
Page 5 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 SPECIFIC SAFETY INSTRUCTIONS Operators and others in work area 1. MUST wear ANSI-approved safety goggles with side shields during use. The employer is responsible to enforce the use of eye protection by the operator and others in the work area. Keep nge ...
-
Harbor Freight Tools 40072 - page 6
Page 6 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 Obey the manual for the air compressor 22. used to power this tool. Install an in-line shutoff valve to allow 23. immediate control over the air supply in an emergency , even if a hose is ruptured. Do not engrave or stamp anything into 24. the housing to p ...
-
Harbor Freight Tools 40072 - page 7
Page 7 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 SPECIFICA TIONS Operating Pressure 60-100 PSI Staple Capacity 80 Staple Length / T ype 3 / 4 ” to 1- 1 / 2 ”, 1 / 4 ” Crown, .039-.042” Shank (18 Gauge) Air Inlet 1 / 4 ” NPT (18 TPI - male/female adapter included) Note: SKU’s 40072 and 97521 c ...
-
Harbor Freight Tools 40072 - page 8
Page 8 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 With the T rigger held, carefully lift the nailer and press it against the workpiece again. The tool must not cycle (re) . If it fails to act in the manner explained in bold, have it repaired by a qualied service technician. Loading Staples A LWA Y S ...
-
Harbor Freight Tools 40072 - page 9
Page 9 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 FIGURE 2 Safety (52) Safety Cover (54) 3. Lift the Safety Cover (54) off the top of the stapler - see Figure 2 . FIGURE 3 Driver (19) Driver Cover (57) 4. Carefully slide the Driver Cover (57) off around the Safety (52) and remove the jammed staple - see F ...
-
Harbor Freight Tools 40072 - page 10
Page 10 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. P ARTS LIST PLEASE READ THE FOLLOWING CAREFULL Y THE M ANUF ACTUR ER AND /OR D ISTRIB UTOR HAS PROV IDED THE P A RTS D IAGRA M IN ...
-
Harbor Freight Tools 40072 - page 11
Page 1 1 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 ASSEMBL Y DIAGRAM ...
-
Harbor Freight Tools 40072 - page 12
Page 12 For technical questions, please call 1-800-444-3353. SKU’s 40072, 40073, & 97521 LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for th ...
¿Tienes una pregunta acerca de Harbor Freight Tools 40072?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Harbor Freight Tools 40072, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Harbor Freight Tools 40072 probablemente compartirá una forma de solucionarlo.