-
Memorex MX3720 - page 1
HOME AUDIO SYSTEM WITH CD PLA YER, CASSETTE RECORDER AND AM/FM STEREO RADIO MODEL: MX3720 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . OPERA TING INSTRUCTIONS MX3720.O/M.QXD 4/30/02 10:48 AM Page 21 ...
-
Memorex MX3720 - page 2
1 DANGER: Invisible and hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. W ARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPO ...
-
Memorex MX3720 - page 3
2 SAFETY INSTRUCTIONS INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequen ...
-
Memorex MX3720 - page 4
3 PREP ARA TION FOR USE (CONTINUED) SPEAKER CONNECTION 1. Place the speakers in convenient locations on either side of the unit. Usually a distance of fi ve to eight feet between speakers provides the best stereo effect, but this may vary depending on the size and acoustics of the room. 2. Locate the Speaker Terminals on the rear of the unit and c ...
-
Memorex MX3720 - page 5
4 LOCA TION OF CONTROLS AND INDICA T ORS 1 7 8 9 3 2 19 4 5 6 12 11 10 13 14 15 16 17 18 21 22 23 24 25 26 27 28 20 1. Speaker 2. Headphone Jack (Top/rear of Unit) 3. FM Antenna (Rear of Unit) 4. FM MODE Switch (Rear of Unit) 5. AUX IN Jacks (Rear of Unit) 6. Speaker Jacks (Rear of Unit) 7. Cassette Compartment 8. Cassette Button Compartment (Butto ...
-
Memorex MX3720 - page 6
5 LOCA TION OF CONTROLS AND INDICA T ORS 1 11 12 13 14 15 2 3 4 5 6 7 8 9 10 1. MUTE Button 2. REPEA T/REPEA T UP Button 3. PLA Y/P AUSE ( ❿ ) Button 4. T uning CD SKIP/Search Button 5. Band/STOP( ■ ) Button 6. PRESET EQ Button 7. VOLUME Buttons 8. TIMER Button 9. DISPLA Y Button 10. POWER Button 1 1. PROGRAM/CLOCK SET Button 12. RANDOM Button ...
-
Memorex MX3720 - page 7
6 OPERA TING INSTRUCTIONS With the power off, press and hold the MEMORY/PROGRAM/ CLOCK SET button; “24H” will blink. 1 Press the MEMORY/PROGRAM/ CLOCK SET button and the hours will blink. 3 Press the Tuning/CD SKIP/ Search ( ) ❶ or ( ) ❷ button to set the unit to the 24 hour (24H) mode (also known as military time, or 12 hour (12H) mode. 1 ...
-
Memorex MX3720 - page 8
7 OPERA TING INSTRUCTIONS (CONTINUED) MUTE To temporarily mute the sound, press the MUTE button on the remote control; “MUTE” will appear in the display and the sound will be muted. Press the MUTE button again to restore the sound and “MUTE” will disappear from the display. 1 Press the POWER button to turn the unit on; the STANDBY indicator ...
-
Memorex MX3720 - page 9
8 OPERA TING INSTRUCTIONS (CONTINUED) Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 Press the MEMORY/PROGRAM/ CLOCK SET button ❶ . Within four seconds, press the REPEAT/ PRESET UP button ❷ until the desired memory number appears on the display. 1 2 4 Use the Tuning/CD SKIP/ Search () ❶ or ( ) ❷ button to s ...
-
Memorex MX3720 - page 10
9 Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 The CD player will read the table of contents on the disc and the total number of tracks and total playing time on the disc will appear in the display. CD 4 Press the CD OPEN/CLOSE button to open the CD compart- ment door. Gently press a CD onto the center spindle, w ...
-
Memorex MX3720 - page 11
10 After you insert the disc into the CD player and the total number of tracks appear on the display, you may press either the Tuning/CD SKIP/Search () ❶ or ( ) ❷ button to select a specific track for playback. 1 2 1 When the desired track number appears in the display, press the PLAY/PAUSE ( ❿ ) button. Playback will begin on the track you s ...
-
Memorex MX3720 - page 12
11 To repeat a single track, press the REPEAT/PRESET UP button ❶ twice; “REPEAT” will blink in the display. Press the Tuning/CD SKIP/ Search ( ) ❷ or ( ) button ❸ to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( ❿ ) button ❹ to begin playback. The specif ...
-
Memorex MX3720 - page 13
12 Press the Tuning/CD SKIP/Search () ❶ or ( ) button ❷ to select the first track that you wish to program. When the desired track number appears in the display, press the MEMORY/PROGRAM/ CLOCK SET button ❸ again. 1 3 2 4 Press either the Tuning/CD SKIP/ Search ( ) ❶ or ( ) button ❷ to select the next track you wish to program. When the d ...
-
Memorex MX3720 - page 14
13 Press the TAPE Function button. 1 Press the PLAY ( ❿ ) button to begin playback. 4 Insert a pre-recorded cassette into the slots in the Cassette Door with the open end facing up. Close the cassette door. 3 Open the Cassette Button compartment and press the STOP/EJECT button to open the cassette compartment. 2 To pause playback momentarily, pre ...
-
Memorex MX3720 - page 15
14 Open the Cassette Button compartment and press the STOP/EJECT button to open the cassette compartment. Insert a good quality blank cassette tape and close the Cassette Door. 1 When you are ready to begin recording, press the RECORD () b utton. The PLAY ( ❿ ) button will also engage. The tape will begin moving and all of the material from your ...
-
Memorex MX3720 - page 16
15 With the power off, press the SLEEP/TIMER button ❶ until “TIMER” blinks in the display. Press and hold the MEMORY/PROGRAM/ CLOCK SET button ❷ until timer hour digits blink in the display. 2 1 1 Within a couple seconds, “TIMER” will light in the display to indicate that the timer is set. When the actual time matches the time set for t ...
-
Memorex MX3720 - page 17
SAFEGUARD AGAINST ACCIDENT AL ERASURE When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device. On the back of the cassette there is an erase preventi ...
-
Memorex MX3720 - page 18
Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry clo ...
-
Memorex MX3720 - page 19
18 Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. FM: Wire Antenna is not Extend Wire Antenna. extended. AM: Unit is not positioned Rotate unit until best reception is correctly. obtained. FM STEREO does not Poor FM signal being rece ...
-
Memorex MX3720 - page 20
19 FOR ADDITIONAL SET -UP OR OPERA TING ASSIST ANCE, PLEASE VISIT OUR WEBSITE A T WWW .MEMCORPINC.COM OR CONT ACT CUSTOMER SERVICE A T 1-800-919-3647. PLEASE KEEP ALL P ACKAGING MA TERIAL FOR A T LEAST 90 DA YS IN CASE YOU NEED TO RETURN THIS PRODUCT T O YOUR PLACE OF PURCHASE OR MEMOREX. FOR P ARTS AND ACCESSORIES, CONT ACT FOX INT’L A T 1-800-3 ...
-
Memorex MX3720 - page 21
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memcorpinc.com MX3720.O/M.QXD 4/30/02 10:48 AM Page 20 ...
¿Tienes una pregunta acerca de Memorex MX3720?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Memorex MX3720, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Memorex MX3720 probablemente compartirá una forma de solucionarlo.