-
NEC E500 - page 1
MultiSync ® E Series User’s Manual MultiSync ® E Series User’s Manual NEC Enter pr ise Seri es Contents 1 Quick Start 2-3 Controls 4-5 Recommended Use 6-7 Specifications 8-9 Features 10 Troubleshooting 11 References 12 Limited Warranty 13 78131861 5/21/98, 2:22 PM 1 ...
-
NEC E500 - page 2
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARN ...
-
NEC E500 - page 3
Contents Power Cord Registration Card MultiSync ® E Series User’s Manual MultiSync ® E Series User’s Manual NEC Enter prise Series — Important — To help us in our continuing efforts to better serve and support you, and to bring you new and innovative products, please take a few moments to register your new NEC MultiSync monitor. By return ...
-
NEC E500 - page 4
Quick Star t To attach the MultiSync ® E Series monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of t ...
-
NEC E500 - page 5
Quick Star t 3 Power Cord Power Outlet Figure D.1 RESET PROCEED EXIT CONTROL MultiSync E 500 Figure C.1 Figure B.1 Computer Mac Adapter (Not included) Captive Signal Cable 15-pin mini D-SUB 78131861 5/21/98, 2:22 PM 5 ...
-
NEC E500 - page 6
4 OSM ™ (On-Screen Manager) control buttons on the front of the monitor function as follows: EXIT Exits the OSM controls. CONTROL § / © Moves the highlighted area left/right to select one of the controls. CONTROL +/– Moves the bar in the + or – direction to increase or decrease the adjustment. PROCEED Enters OSM menu and selects icons at th ...
-
NEC E500 - page 7
Tools Degauss Control: Eliminates the buildup of stray magnetic fields that alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetized. Caution: Please allow a minimum of 20 minutes to elapse between uses of ...
-
NEC E500 - page 8
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® E SERIES COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified ser ...
-
NEC E500 - page 9
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Recommended Use • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your ...
-
NEC E500 - page 10
Specifications 8 Monitor MultiSync ® E 500 ™ Notes Specifications Monitor Picture Tube Diagonal: 15 inch 90 ° deflection, 0.25 mm mask pitch, Viewable Image Size: 13.8 inch CromaClear ™ CRT, medium-short persistence Radius: 1080 mm phosphor, multi-layered, anti-static screen coating, dark-tint screen, Invar Shadow Mask and OptiClear ® screen ...
-
NEC E500 - page 11
9 Monitor MultiSync ® E 700 ™ Notes Specifications Monitor Picture Tube Diagonal: 17 inch 90 ° deflection, 0.25 mm mask pitch, Viewable Image Size: 15.6 inch CromaClear ™ CRT, medium-short persistence Radius: 1210 mm phosphor, multi-layered, anti-static screen coating, dark-tint screen, Invar Shadow Mask and OptiClear ® screen surface. Input ...
-
NEC E500 - page 12
10 Features CromaClear ™ CRT: Delivers images with more clarity than found in traditional CRT’s. Phosphors appear elliptical when illuminated, resulting in screen images with more depth and dimension. OptiClear ® Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along wi ...
-
NEC E500 - page 13
11 T roubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be complete ...
-
NEC E500 - page 14
12 References • BBS (508) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (508) 635-4298 • Direct Sales (800) ...
-
NEC E500 - page 15
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warra ...
-
NEC E500 - page 16
NEC Enterprise Series Part No. 78131861 Printed in Malaysia PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this documen ...
¿Tienes una pregunta acerca de NEC E500?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con NEC E500, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con NEC E500 probablemente compartirá una forma de solucionarlo.