-
Audiovox LCMR6CT - page 1
Rearview Mirror with 4.5" Color LCD with Navigation/2 Camera inputs/Compass And Outside Temperature Display Model: LCMR6CT Installation Manual Features: Rearview Mirror with 4.5” LCD Rearview Camera Input Interior View Camera Input Navigation Display Input NTSC /PAL Compatible Camera Input Compass Display Outside Temperature Display ...
-
Audiovox LCMR6CT - page 2
Cautions! The product is intended to assist in saf e driving and to allow the driver to have a broader rearview while the vehicl e is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to the country and their local traffic regulations. Do not use any features of ...
-
Audiovox LCMR6CT - page 3
TABLE OF CONTENTS C a u t i o n s ! 1 Preface 3 Packing list 3 1.Installation Instructions 4 2.Signal Inputs 7 3.Controls and Indicators 9 Specifications 12 Maintenance 13 Troubleshooting 14 Illustration of connections 15 2 ...
-
Audiovox LCMR6CT - page 4
Preface This replacement mirror /m onitor can display up to 3 different video inputs. The inputs are Navigation, Rear observation camera and Interior observation camera. Not all rearview mirrors attach to the vehicle with the same style mount. Please consult the application guide for the appropriate mounting bracket for your vehicle or call Tech Se ...
-
Audiovox LCMR6CT - page 5
1. Installation Instructions (1) Mount the mirror/monitor a) Remove the original factor y mirror . (Do not use excessive force when removing factory mirror .) Check to make sure that the factory mirror mount you remove matches the mirror mount on the replacement mirror . If it does not match, consult the application guide or call T echnical Service ...
-
Audiovox LCMR6CT - page 6
(4) Installing the Temperature Sensor. a) Select a suitable location for the Temper ature sensor outsi de of the vehicle. The location should be in the nose area of the vehicl e, between the front of the radiator and front bumper where there will be airflow. Keep the sen sor as low as possible, and as far away from the radiator as possi ble. b) Use ...
-
Audiovox LCMR6CT - page 7
b ) Secure the Compass sensor using the screw provide or double sided adhesive tape to the selected location with the head of the compass s ensor arrowhead facing forward. c ) Route the Compass cable up the A pillar and connect the 5 pin Compass Sensor cable to the mating 5 pin connector of the Temperature/ Compass Y cable. d ) Tuck the connectors ...
-
Audiovox LCMR6CT - page 8
W ARNING : Observe polarity when connecting the wir es. Figure 4 2. Signal Inputs The signal input connections for the system include: Control BOX To Control BOX Filter BOX Cam Button Selector Switch To Rearview Camera To Interior Camera To Mirror Assembly To Filter BOX Red (+12V) Blue (Ignition) Black (GND) Green (Reverse) (1) Rear Camera: Plug th ...
-
Audiovox LCMR6CT - page 9
(6) Navigation Image (optional Navigation System r equired) The Navigation Image is the default mode, and will only be overridden when the ve hicle gea r selector is m oved into reverse, or if the CAM button on the mirror is pressed. Some operat ors may find that leaving t he Navigati on Image on t he LCD monitor at all times becomes a distraction ...
-
Audiovox LCMR6CT - page 10
Figure 5 3. Controls and Indicators Figure 3 shows the function controls of the rear view mirror . A : 4.5" LCD Panel B : Rearview Mirror Glass C : “+” Button (optional Navi gation System required) Incrementally increase volume level of the navigation voice command w hen pressed. Note: Will only operate when the Navigation System remote co ...
-
Audiovox LCMR6CT - page 11
E : “MAP” Button (optional Navigation System required) Each time the “MAP” button is pressed, the nav igation display will toggle between Map, Icon on ly and split screen while in navigatio n mode. Note : Will only operate when the Navigatio n System remote control is removed from the cradle. F : “-” Button (optional Navi gation System ...
-
Audiovox LCMR6CT - page 12
N : Calibration Switch: Used to calibrate th e compass display. Figure 6 Figure 7 11 ...
-
Audiovox LCMR6CT - page 13
Specifications General Power Supply 12VDC Power Consumption <12W Current Draw <800mA Video Input 1Vp-p/ 75 Impedance Audio Input <=1V Audio Power Output 0.5W × 1 (16 Ω ) Operating Temperature Range 0 degrees C to 50 degrees C Display System Screen 4.5” TFT Color LCD Brightness 400 cd/ Contrast Ratio 150 : 1 Backlight Life 10000 ho ...
-
Audiovox LCMR6CT - page 14
Maintenance Though your Rearview mirror requires little care, you can still maintain its condition and performance by following the procedures below. Keep your system away from excessive moisture, extreme heat or cold, and magnetic fields. Keep liquids away from the display and mirror. To avoid damage, do not place external devices or o ...
-
Audiovox LCMR6CT - page 15
Troubleshooting Symptoms Solutions The ON/OFF signal light <E> is not on after the car is started? 1. Check the installation-wiring diagram. 2. Ensure that the parallel red and black line from the control box is connected properly. 3. Check for 12 volts on the blue wire while the ignition on. No video signal appears while reversing the car? 1 ...
-
Audiovox LCMR6CT - page 16
Illustration of Connections Figure 8 15 ...
-
Audiovox LCMR6CT - page 17
© 2006 Audiovox Electronics Corp., 150 Ma rcus Blvd., Hauppauge, N.Y. 11788 128-7737 16 ...
¿Tienes una pregunta acerca de Audiovox LCMR6CT?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Audiovox LCMR6CT, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Audiovox LCMR6CT probablemente compartirá una forma de solucionarlo.