-
Harbor Freight Tools 94560 - page 1
ORBIT AL JIGSA W WITH LASER Model 94560 ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yright © 2006 by Harbor F reight T ools ® . All r ights reser v ed. No por tion of this manual or an y ar twork contained herein may be reproduced in any shape or f ...
-
Harbor Freight Tools 94560 - page 2
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 2 GENERAL SAFETY R ULES W ARNING! READ AND UNDERST AND ALL INSTR UCTIONS Failure to f ollow all instructions listed below ma y result in electric shock, fire , and/or serious injur y . SA VE THESE INSTR UCTIONS W ORK AREA 1. Keep y our work area c lean and well lit. Cluttered benc ...
-
Harbor Freight Tools 94560 - page 3
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 3 ELECTRICAL SAFETY 4. Grounded tools m ust be plugged into an outlet properly installed and grounded in accor dance with all codes and ordinances. Never remo ve the grounding pr ong or modify the plug in any wa y . Do not use any adapter plugs. Check with a qualified electrician ...
-
Harbor Freight Tools 94560 - page 4
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 4 12. A void accidental starting. Be sure the P ower Switch is off bef ore plugging in. Carr ying power tools with y our finger on the P ower Switch, or plugging in pow er tools with the P ower Switch on, in vites accidents. 13. Remove adjusting ke ys or wrenches before turning th ...
-
Harbor Freight Tools 94560 - page 5
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 5 23. Use only accessories that are recommended b y the manufacturer for y our model. Accessor ies that ma y be suitable f or one tool ma y become hazardous when used on another tool. SER VICE 24. T ool service must be perf ormed only b y qualified repair personnel. Ser vice or ma ...
-
Harbor Freight Tools 94560 - page 6
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 6 Before using the Jigsa w, check to make sure the Sa w Blade is properl y mounted on the Blade Chuck. Make sure the Saw Blade is sharp , and is not crac ked or bent. Industrial applications must f ollow OSHA guidelines. When cutting a large w orkpiece, make sure its entire length ...
-
Harbor Freight Tools 94560 - page 7
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 7 MISCELLANEOUS PRECA UTIONS 1. W ARNING! Some dust created by pow er sanding, sawing, g rinding, dr illing, and other construction activities, contain chemicals known (to the State of Calif or- nia) to cause cancer , bir th defects or other reproductiv e har m. Some e xamples of t ...
-
Harbor Freight Tools 94560 - page 8
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 8 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’ s grounding system and must ne ver be attached to an electrically “liv e” ter ...
-
Harbor Freight Tools 94560 - page 9
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 9 EXTENSION CORDS 1. Grounded tools require a three wire e xtension cord. Double Insulated tools can use either a two or three wire e xtension cord. 2. As the distance from the supply outlet increases, y ou must use a heavier gauge e xtension cord. Using extension cords with inadeq ...
-
Harbor Freight Tools 94560 - page 10
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 10 SYMBOLOGY FIGURE D UNP A CKING When unpac king, chec k to mak e sure all the par ts shown on the P ar ts List on page 16 are included. If any par ts are missing or broken, please call Harbor F reight T ools at the number sho wn on the cov er of this manual as soon as possible . ...
-
Harbor Freight Tools 94560 - page 11
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 11 6. Dust Chute (54): For a clearer cut line the Jigsa w can be attached to a vacuum system (not included) that will suck dust a wa y from the cutting line. The Jigsaw comes equipped with a Dust Chute that allows a standard household v acuum system to be attached to the tool. (See ...
-
Harbor Freight Tools 94560 - page 12
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 12 ASSEMBL Y INSTRUCTIONS T o Install A Saw Blade: 1. CA UTION! Alwa ys make sure the P ow er Switch (29) of the Jigsaw is in its “OFF” position and the tool is unplugged from its electrical outlet pr ior to adding any accessories or making adjustments to the tool. 2. Ref er to ...
-
Harbor Freight Tools 94560 - page 13
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 13 B ASIC OPERA TING INSTR UCTIONS 1. CA UTION! Alwa ys use safety equipment. W ear ANSI approv ed safety impact ey e goggles and heavy duty work glov es when operating the Jigsaw . Also , a dust mask and hearing protection must be used f or appropriate conditions. 2. IMPORT ANT : ...
-
Harbor Freight Tools 94560 - page 14
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 14 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the P ower Switch (29) of the Jigsa w is in its “OFF” position and the tool is unplugged from its electrical outlet before perf or ming any inspection, maintenance, or cleaning procedures . 2. Before eac h use, ins ...
-
Harbor Freight Tools 94560 - page 15
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 15 PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P AR TS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y . NEITHER THE MANUF ACTURER OR DISTRIB UT OR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND TO THE BUYE ...
-
Harbor Freight Tools 94560 - page 16
SKU 94560 For technical questions, please call 1-800-444-3353 P AGE 16 ASSEMBL Y DIA GRAM NO TE: Some par ts are listed and shown f or illustration purposes only , and are not av ailable individually as replacement par ts. 68: W ood Cutting Blades not shown. 69: Metal Cutting Blade not shown. 70: Edge Guide not shown. ...
¿Tienes una pregunta acerca de Harbor Freight Tools 94560?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Harbor Freight Tools 94560, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Harbor Freight Tools 94560 probablemente compartirá una forma de solucionarlo.