-
Panasonic WV-BF102 - page 1
Color CCTV Camera WV -CF202 CCTV Camera WV -BF102 Before attempting to connect or operate this product, please read these instructions completely. FRANÇAIS ENGLISH ...
-
Panasonic WV-BF102 - page 2
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclo- sure that may be of sufficient magni- tude to cons ...
-
Panasonic WV-BF102 - page 3
-1- CONTENTS PREFACE ........................................................................................................................................................................ 2 FEATURES ..................................................................................................................................................... ...
-
Panasonic WV-BF102 - page 4
-2- PREF ACE Panasonic’s WV-CF202/WV-BF102 CCTV camera is designed for advanced video surveillance with a new concept, mini-dome shape, and introduces a new level of the high picture quality and high resolution through the use of a 1/4-inch interline transfer CCD image sen- WV-CF202 • Signal-to-noise ratio of 46 dB • Maximum illumination of 1 ...
-
Panasonic WV-BF102 - page 5
-3- 5. Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused. 6. Do not use chemical e.g. thinner or benzene for cleaning the lens. When the lens becomes dirty, wipe it using a soft clo ...
-
Panasonic WV-BF102 - page 6
-4- MAJOR OPERA TING CONTROLS AND THEIR FUNCTIONS ...
-
Panasonic WV-BF102 - page 7
-5- q DC Power Input Connector This connector is for connecting the 12V DC power supply cable. w Video Output Connector This connector is for connecting with the VIDEO IN connector of the monitor. e Cable Exit Pass the cables through this concave when installing on the ceiling/wall. r Camera Mounting Screw Holes Mount the camera by fixing with scre ...
-
Panasonic WV-BF102 - page 8
-6- CONNECTION Precaution: The following connections should be made by qualified service personnel or system installers. To Video IN (CAMERA IN) Video Output Cable 12V DC BNC Plug BNC Plug Coaxial Cable ...
-
Panasonic WV-BF102 - page 9
Pin No. Copper wire size (AWG) #18 (0.83mm 2 ) -7- How to assemble the cable with the accessory connector Strip back the cable jacket approx. 3 mm (1/8 inch) and separate the individual conductors. Recommended wire gauge sizes for 12 V DC line. #24 (0.22mm 2 ) Length of Cable (Approx.) (m) (ft) #22 (0.33mm 2 ) #20 (0.52mm 2 ) 20 30 45 75 65 100 160 ...
-
Panasonic WV-BF102 - page 10
-8- INST ALLA TION Important Notices: • The following installation should be made by quali- fied service personnel or system installers and should confirm to all local codes. • Be sure to use a ceiling board having enough strength to support this camera. Mounting the camera when you can make a hole for the cables on the ceiling/wall. When you c ...
-
Panasonic WV-BF102 - page 11
-9- 2. Open the panel cover by using a tool, such as a screwdriver ( − ). 3. Pass the cables through the cable hole. ...
-
Panasonic WV-BF102 - page 12
-10- 4. Connect the cables as described in the previous section “CONNECTION”. 6. Mount the camera onto the ceiling/wall by fixing with the mounting screws. Note: Before fixing with the screws, confirm the direction of the camera by checking the posi- tion of the logo “Panasonic” on the camera cover. “Panasonic” logo indicates the front ...
-
Panasonic WV-BF102 - page 13
-11- Front/Upper 7. Close the panel cover. Make sure the panel cover is closed properly and firmly. 8. Attach the rubber cap into the camera mounting screw hole on the camera cover. ...
-
Panasonic WV-BF102 - page 14
-12- Mounting the camera when you can not make a hole for the cables on the ceiling/wall. When you can not make a hole for the cables on the ceiling/wall where the camera to be installed, proceed as follows; 1. When you can not make a hole in the ceiling/wall to pass the cables through, cut and remove the plas- tic part to make the concave for cabl ...
-
Panasonic WV-BF102 - page 15
-13- 5. Connect the cables as described in the previous section “CONNECTION”. 6. Remove the rubber cap form the camera mounting screw hole on the camera cover. 7. Mount the camera onto the ceiling/wall by fixing with the mounting screws. Note: Before fixing with the screws, confirm the direction of the camera by checking the posi- tion of the l ...
-
Panasonic WV-BF102 - page 16
-14- ADJUSTMENT 1. Panning 1. Remove the dome cover from the camera. Hold here 2. Adjust the direction of the camera head by moving the panning table. To move the panning table, hold the camera head holder and move it. The panning table can be moved ±90° (180°). Camera Head Camera Head Holder 90 K 90 K ...
-
Panasonic WV-BF102 - page 17
-15- 2. Tilting the camera The tilting angle is shown below. The camera head can be tilted ±75° (150°). 46 Vertical Angular of View Vertical Angular of View (max.) 75 46 Notes: • Uprighting the picture on the monitor screen is usu- ally necessary. (Refer to 3. Uprighting the picture.) • The shadow of the dome cover will be taken by the camer ...
-
Panasonic WV-BF102 - page 18
-16- 4. Focusing Adjust the focus by turning the lens. After adjusting the focus, attach the dome cover to the camera body. Dome Cover ...
-
Panasonic WV-BF102 - page 19
-17- When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming. Bright object Smear PREVENTION OF BLOOMING AND SMEAR ...
-
Panasonic WV-BF102 - page 20
-18- WV-CF202 Pick-up Device: 512 (H) x 492 (V) pixels, Interline Transfer CCD Scanning Area: 3.16 (H) x 2.72 (V) mm (Equivalent to scanning area of 1/4” pick-up tube) Scanning: 525 lines / 60 fields / 30 frames Horizontal: 15.734 kHz Vertical: 59.94 Hz Synchronization: Internal Video Output: 1.0 V[p-p] NTSC composite 75 Ω / BNC connector Horiz ...
-
Panasonic WV-BF102 - page 21
-19- WV-BF102 Pick-up Device: 512 (H) x 492 (V) pixels, Interline Transfer CCD Scanning Area: 3.16 (H) x 2.72 (V) mm (Equivalent to scanning area of 1/4” pick-up tube) Scanning: 525 lines / 60 fields / 30 frames Horizontal: 15.734 kHz Vertical: 59.94 Hz Synchronization: Internal Video Output: 1.0 V[p-p] EIA composite 75 Ω / BNC connector Horizo ...
-
Panasonic WV-BF102 - page 22
-20- ST ANDARD ACCESSORIES Rubber Cap ................................................................................1 Connector for Power...................................................................1 OPTIONAL ACCESSORIES Lenses .....................WV-LXY18C4, WV-LXY23C4, WV-LXY47C4 ...
-
Panasonic WV-BF102 - page 23
N0498-1058 YWV8QA4963BN Printed in Japan N 30 Video Imaging Systems Company A Division of Panasonic Broadcast & Television Systems Company A Unit of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 4H-2, Secaucus, New Jersey 07094 Regional Offices: Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Sou ...
¿Tienes una pregunta acerca de Panasonic WV-BF102?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Panasonic WV-BF102, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Panasonic WV-BF102 probablemente compartirá una forma de solucionarlo.