-
Fujitsu PDS6101W - page 1
Before using the display , read this manual carefully so that you know how to use the display cor rectly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily . * Installation and removal require special exper tise. Consult y ...
-
Fujitsu PDS6101W - page 2
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial P ark, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Y amagata Japan declar es under our sole responsibility that the pr oduct, T ype: 50” PLASMA DISPLA Y Model ...
-
Fujitsu PDS6101W - page 3
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Y amagata Japan declar es under our sole responsibility that the pr oduct, T ype: 50” PLASMA DISPLA Y Model ...
-
Fujitsu PDS6101W - page 4
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Y amagata Japan declar es under our sole responsibility that the pr oduct, T ype: 61” PLASMA DISPLA Y Model ...
-
Fujitsu PDS6101W - page 5
E-2 SAFET Y PRECA UTIONS FCC NO TICE • PDS5003W/PDS5003U/PDS6101W : A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated ...
-
Fujitsu PDS6101W - page 6
E-3 – Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer ’ s instructions, and should use a mount recommended by the manufacturer . – When the product is used on a cart, ...
-
Fujitsu PDS6101W - page 7
E-4 FEA TURES This display uses a plasma display panel and is only 9.8 cm (50 ” ) /11.8 cm (61 ” ) deep. With its high picture quality and performance, it is perfectly suited for multimedia applications. V ar iety of input signals • In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such ...
-
Fujitsu PDS6101W - page 8
E-5 ACCESSORIES Infor mation Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. One remote control T wo AA bat teries One user ’ s manual CHECKING ACCESSORIES One power cable HAND Y TIPS • Pictures may become “ burnt ” into the screen phosphors if the screen ...
-
Fujitsu PDS6101W - page 9
E-6 INS T ALLA TION T o prev ent the display ’ s internal components from ov erheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display . Also, be sure that your dealer performs the installation. ...
-
Fujitsu PDS6101W - page 10
E-7 PAR T NAMES AND FUNCTIONS Fr ont (both 50" and 61") 1 P ower indicat or lamp This lamp shows the state of the po wer supply . Lit (red): Po wer OFF (stand-by) Lit (green): Po wer ON Lit (orange): Po wer saving (DPMS: Po wer saving function) mode ON Flashing (red): Malfunction (Flashes dif ferently depending on the type of malfunction. ...
-
Fujitsu PDS6101W - page 11
E-8 1 OFF/STD-B Y switch OFF : The po wer indicator lamp goes off, and the power can ’ t be turned on by the power button. The power is partly supplied. STD-BY :The power indicator lamp lights red, and the po wer can be turned on or off by the po wer button. 2 RGB 2 input t er minal (RGB 2 INPUT/mD-sub) Connect this terminal to the PC ’ s displ ...
-
Fujitsu PDS6101W - page 12
E-9 9 Sound 1 input ter minal (A UDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. (See P .E-37 for the selection of audio input for video input.) 0 RGB 3 sync hronization switc h (SYNC SW TTL/ANAL OG (75 Ω )) This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input ter ...
-
Fujitsu PDS6101W - page 13
E-10 Descr iption of Input T erminals DVI-D terminal (RGB 1 INPUT/D VI-D) Pin No. Input signal Pin No. Input signal 1R e d 9 — 2 Green 1 0 Ground 3 Blue 1 1 — 4 — 12 — 5 Ground 13 Horiz ontal sync hronization 6 Ground 1 4 V ertical sync hronization 7 Ground 15 — 8 Ground Frame Ground RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No. Signal ...
-
Fujitsu PDS6101W - page 14
E-11 1 P ower ON but ton [PO WER ON] ➝ (See P . E-16.) 2 P ower OFF but ton [POWER OFF] ➝ (See P . E-16.) 3 RGB input mode select or but ton [RGB] ➝ (See P . E-1 7 .) 4 V ideo input mode selector but ton [VIDEO] ➝ (See P . E-1 7 .) 5 Wide scr een selector but ton [WIDE] ➝ (See P . E-1 8 – E-19.) 6 Menu butt on [MENU] ➝ (See P . E-20 ? ...
-
Fujitsu PDS6101W - page 15
E-12 PRECA UTIONS T o prev ent malfunction, be sure not to apply any form of sev ere shock to the remote control. T o prev ent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it a way from hot locations or heating equipment. Be sure not to clean the remote control using a cloth dampened in any v olatile ...
-
Fujitsu PDS6101W - page 16
E-13 Be sure to turn OFF the po wer to the display and external equipment before making an y connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPT ACLE Make sure that the po wer cable ’ s grounding w ...
-
Fujitsu PDS6101W - page 17
E-14 PO WER INPUT COMPONENT VIDEO INPUT (color dif ference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) A UDIO2 INPUT VIDEO INPUT S-VIDEO INPUT AUDIO1 INPUT RS-232C T o RS-232C output terminal T o display (digital RGB) output terminal T o S-video output terminal T o video output terminal T o display (analog RGB) output terminal T o co ...
-
Fujitsu PDS6101W - page 18
E-15 PO WER INPUT COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) AUDIO2 INPUT VIDEO INPUT S-VIDEO INPUT AUDIO1 INPUT RS-232C T o RS-232C output terminal T o display (digital RGB) output terminal T o S-video output terminal T o video output terminal T o display (analog RGB) output terminal T o colo ...
-
Fujitsu PDS6101W - page 19
E-16 Select the OFF/STD-B Y switch at the STD-B Y of the displa y . When you do so, the power indicator lamp turns red. (This applies only to 50 ” displa y .) Pr ess on the r emote contr ol. When you do so, the power indicator lamp turns green. Pr ess or t o select a desir ed input mode. BA SIC OPERA TIONS * Y ou can also use the switches on the ...
-
Fujitsu PDS6101W - page 20
E-17 SELECTING INPUT MODE Pr ess t o select a desir ed input mode. Each time you press , a different input mode appears. The sequence is as follo ws: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal. Comp.video : Displays pictures from equipment co ...
-
Fujitsu PDS6101W - page 21
E-18 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor b urn-in. • A variety of picture modes are a vailable with this display . Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or ...
-
Fujitsu PDS6101W - page 22
E-19 Infor mation Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V ista V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Nor mal Displays pictures of normal size (i.e., a 4:3 aspect ratio). SCREEN SIZE ASPECT RA TIO The following aspec ...
-
Fujitsu PDS6101W - page 23
E-20 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Pr ess . The main menu screen will appear . Pr ess or to switc h between sub-menus. Each time you press or , one of the available menus appears. The corresponding menu screen will appear . Pr ess or t o select an option ...
-
Fujitsu PDS6101W - page 24
E-21 : Increases width. : Reduces width. : Increases height. : Reduces height. Option (1) Contrast (2) Brightness (3) Color (4) T int (5) Sharpness (6) Picture Mode (7) Color T emp. (8) User Color T emp. (9) Noise Reduction (for V ideo, S-video, Comp.video) Function Adjusts picture contrast. Adjusts screen brightness. Adjusts color darkness. Adjust ...
-
Fujitsu PDS6101W - page 25
E-22 Operation : Stronger treble : W eaker treble : Stronger bass : W eaker bass : Higher volume from right- hand speaker : Higher volume from left- hand speaker Use or for switching. Range/Set ting -6 to + 6 -6 to + 6 -10 to +10 On /Of f (disabled) USING THE FEA TURES MENUS • FEA TURES setup screen has 5 options of Adjustment, Function, On Scree ...
-
Fujitsu PDS6101W - page 26
E-23 Option (1) 24 Frame Mode (for V ideo, S-video, Comp.video) (2) 3D Y/C (for V ideo(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use or for switching. Use or for switching. Range/Set ting On (Movie) / Of f (Normal) On (3D Y/C circuit) / Of f (3-line) Function Menu(See P . E-32, ...
-
Fujitsu PDS6101W - page 27
E-24 HO W T O USE MENUS (Continued) Others(1/2) Menu screen Option (1) Picture Memory (2) DPMS (for other than RGB1) (3) Audio Input Function Storing the setting of Picture menu in 8 pattern. Specifies time before DPMS starts. Can specify the background color when specifying time. Selects audio input terminal. Operation Display Picture Memory scree ...
-
Fujitsu PDS6101W - page 28
E-25 Operation Display the “ Screen Orbiter ” adjustment screen and use or to select an option. Use or to switch between av ailable choices for the selected option. Use or for switching. Use or for switching. Use or for switching. Display Code Setting screen and press or to select an option. Select Manual to set up Parameter . Use or for switch ...
-
Fujitsu PDS6101W - page 29
E-26 AD JUS TING PICTURES (PICTURE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ PICTURE ” . Each time you press or , one of the av ailable menus appears in the following sequence: The PICTURE Menu screen will appear . Pr ess or to select “ Tint ” . Pr ess . The “ Ti n t ” adjustment screen will appear . Pr ess ...
-
Fujitsu PDS6101W - page 30
E-27 • Adjusting Contr ast (Contrast) Any v alue between -30 and +30 can be selected. : Higher contrast : Lo wer contrast Press to store. • Adjusting Scr een Brightness (Br ightness) Any v alue between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store. • Adjusting Color D arkness (Color) Any v alue between -60 and ...
-
Fujitsu PDS6101W - page 31
E-28 AD JUS TING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess . The main menu screen will appear . Pr ess or t o select “ POSITION/SIZE ” . Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear . Pr ess or to select “ P osition ” . Pr ess . The “ Position ? ...
-
Fujitsu PDS6101W - page 32
E-29 Comp.video mode -16 to +16 -32 to +32 (for1080I,720P) -4 to +4 RGB mode RGB-PC: -150 to +150 RGB-V ideo, Decoder: -16 to +16 -32 to +32 (for1080I,720P) RGB-PC: -25 to +50 RGB-V ideo, Decoder: -4 to +4 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document repr ...
-
Fujitsu PDS6101W - page 33
E-30 AD JUS TING A UDIO (A UDIO MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ A UDIO ” . Each time you press or , one of the av ailable menus appears in the following sequence: The A UDIO Menu screen will appear . Pr ess or to select “Balance ” . Pr ess . The “Balance” adjustment screen will appear . Pr ess or ...
-
Fujitsu PDS6101W - page 34
E-31 Adjusting T r eble (T reble) Each audio input Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Each audio input Any v alue between -6 and +6 can be selected. : Stronger bass : W eaker bass Adjusting V olume Balance (Balance) Each audio input Any v alue between -10 and +10 can be selected. : ...
-
Fujitsu PDS6101W - page 35
E-32 OTHER AD JUS TMENTS (FEA TURES MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ FEA TURES ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear . Pr ess or to select "On Scr een Menu". • Select a desired option for adjustment/setup ...
-
Fujitsu PDS6101W - page 36
E-33 • FEA TURES setup scr een has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P . E-34.) On Screen Menu : Can make a display setting such as OSD, Language. (See P . E-34.) Input T erminal : Can make an in ...
-
Fujitsu PDS6101W - page 37
E-34 • Setting Displa y Infor mation (OSD) All modes Y ou can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press , one of the av ailable choices appears in the following sequence: On Off On : Displays all information. Off ...
-
Fujitsu PDS6101W - page 38
E-35 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Selecting Video Mode (V ideo Input) Y ou can use this option to select the desired ...
-
Fujitsu PDS6101W - page 39
E-36 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued ) INPUT TERMINAL • Selecting D-SUB Input (D-SUB Input) All modes Y ou can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears. (2) Select the signal system to receive. Each time you press or , one of ...
-
Fujitsu PDS6101W - page 40
E-37 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Selecting time bef ore DPMS star ts (DPMS) All modes Y ou can use this option to se ...
-
Fujitsu PDS6101W - page 41
E-38 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued ) • Minimizing phosphor bur n-in (Screen Orbiter) Y ou can use this option to move the screen position to minimize phosphor-induced “ b urn-in ” . Follo w the steps below . (1) Select “ Screen Orbiter ” and press . The “ Screen Orbiter ” setting screen will appear . (2)Press or to ...
-
Fujitsu PDS6101W - page 42
E-39 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Assigning Numbers to Displa ys (Monitor No.) All modes When you use two or more dis ...
-
Fujitsu PDS6101W - page 43
E-40 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued) * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbre viations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Setting Exhibition Mode (Exhibit ...
-
Fujitsu PDS6101W - page 44
E-41 INITIALIZA TION OF USER AD JUS TMENT V ALUE(F ACT OR Y DEF A UL T) Pr ess . The main menu screen will appear . Pr ess or t o select “ F ACT OR Y DEF A UL T ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear . Pr ess . • Displays the message of whether to procee ...
-
Fujitsu PDS6101W - page 45
E-42 OPTIONS W all-mounting unit Horizontal: 0 ° to 15 ° mounting angle P-50WB01 (for horizontal) (both 50" and 61") Hanging unit 0 ° to 15 ° mounting angle (variable) P-50CT01 (for horizontal) (both 50" and 61") produce dealer . Stand P-50TT01 (for horizontal) (both 50" and 61") Speaker P-50SP01 (for 50 ” ) P-61 ...
-
Fujitsu PDS6101W - page 46
E-43 FA CT OR Y SET TINGS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment v alue of the first input signal. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size ” on P . E-28 – E-29 to adjust the parameters. ...
-
Fujitsu PDS6101W - page 47
E-44 Model PDS50 03W/PDS5003U/PDS50 04W/PDS50 04U Screen size 50" wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal) Aspect ratio 16:9 (wide) W eight 45.0 kg / 99.2 lbs Outer dimensions 121.2 (W) x 72.6 (H) x 9.8 (D) cm 47.7 (W) x 28.6 (H) x 3.9 (D) inch Po wer supply 220 – 240 V A ...
-
Fujitsu PDS6101W - page 48
E-45 Regulation --- PDS5003W • EMC:FCC Part 15 Class A, ICES-003 Class A • CE Safety: EN60065 EMC: EN55022 1998, Class A EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS Safety: IEC60065 EMC: AS/NZS 3548 Regulation --- PD ...
-
Fujitsu PDS6101W - page 49
E-46 A ction • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check whether the input mode display is colored pink.Special setup may hav e been made. Return ...
-
Fujitsu PDS6101W - page 50
1116, Suenaga, T akatsu-ku, Kawasaki 213-8502, J apan Printed in J apan 81 131530 1 9 ...
¿Tienes una pregunta acerca de Fujitsu PDS6101W?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fujitsu PDS6101W, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fujitsu PDS6101W probablemente compartirá una forma de solucionarlo.