-
Coda 10.5 - page 1
AMPLIFIER 10.5 OPERA TION MANUAL TECHNOLOGIES INC. ADDRESS 9 4 1 2 3 13 16 15 14 12 SAFETY PRECAUTIONS INST ALLA TION CONNECTIONS INTRODUCTION DET AILED INST ALLA TION DESIGN PHILOSOPHY TECHNICAL DA T A CARE and HANDLING W ARRANTY W ARRANTY REGISTRA TION ...
-
Coda 10.5 - page 2
! CAUTION CAUTION W ARNING W ARNING ! SERVICING TO QUALIFIED SERVICE CAUTION : TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE, REFER PERSONNEL. THIS SYMBOL IS INTENDED TO ALERT YOU OF THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT. THIS SYMBOL IS TO ALERT YO ...
-
Coda 10.5 - page 3
This amplifier is a precision device, designed in an effort to provide the listener with unmatched sound quality, design, and construction. In order to operate your amplifier properly and to realize all of the capabilites of the AMPLIFIER 10.5, we recommend that you read this entire manual carefully. 2 INTRODUCTION ...
-
Coda 10.5 - page 4
TECHNOLOGIES INC. MODEL SERIAL NUMBER VOLTAGE REQUIREMENT MANUFACTURED IN THE USA HZ POWER REQUIREMENT VA FOR CONTINUED PROTECTION AGAINST SHOCK OR FIRE: 1. REPLACE FUSE WITH SAME TYPE AND RATING 2. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE BRIDGED STEREO DO NOT ALLOW AMPLIFIER OUTPUTS TO COMMON BETWEEN CHANNELS, OR CONTACT CHASSIS OR INPUT GROUN ...
-
Coda 10.5 - page 5
MAIN POWER OFF ON CAUTION CAUTION WARNING WARNING ! TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. TECHNOLOGIES INC. MODEL SERIAL NUMBER VOLTAGE REQUIREMENT MANUFACTURED IN THE USA 50/60 HZ VA AC LINE FUSE CHART FUSE AND VOLT AGE SELECTOR FUSE VALUE -SEE FUSE CHART ...
-
Coda 10.5 - page 6
II. Front Panel Control Functions and Indicators 1. The BIAS button turns on the bias and opens shunting relays that mute the input. 2. The INPUT SELECTOR button switches between the balanced and unbalanced inputs. 3. These LEDs when lit, indicate that the bias is activated in the AMPLIFIER 10.5. 4. This two color LED indicates that the main power ...
-
Coda 10.5 - page 7
III. Remote Control The AMPLIFIER 10.5 may be operated by remote control. To operate, set the universal remote to AUX . The provided universal remote can be used to control other Coda products as well as many other audio and video components. For instructions on the remotes other capabilities, refer to the Universal Remote Control Manual. 1. The BI ...
-
Coda 10.5 - page 8
BRIDGED operation consists of one AMPLIFIER 10.5 per channel. The amount of power from a stereo AMPLIFIER 10.5 is 100 Watts with 25 Watts class A per channel. A bridged AMPLIFIER 10.5 is 400 Watts with 25 Watts class A per chassis. To bridge, set the MODE switch on the back of the amplifier to the BRIDGED position. NOTE: TURN THE MAIN AC POWER SWIT ...
-
Coda 10.5 - page 9
FOR CONTINUED PROTECTION AGAINST SHOCK OR FIRE: 1. REPLACE FUSE WITH SAME TYPE AND RATING 2. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE BRIDGED STEREO DO NOT ALLOW AMPLIFIER OUTPUTS TO COMMON BETWEEN CHANNELS, OR CONTACT CHASSIS OR INPUT GROUNDS, OR TO BE CONNECTED TO ANY ACTIVE CURRENT SOURCE. MAIN POWER OFF ON AC LINE FUSE CHART FUSE AND VOLTAGE ...
-
Coda 10.5 - page 10
9 DESIGN PHILOSOPHY I. Design Philosophy and Approach The subtlety of the design process at this level of performance makes it impossible to easily explain all of the advantages inherent in the Amplifier 11.5. However, we present here an overview to give you an understanding of some of its unique features and an idea of the listening experience you ...
-
Coda 10.5 - page 11
DESIGN PHILOSOPHY 10 To maintain “ Precision Bias ” requires an advanced bias circuit that must have a very high degree of stability under a wide range of temperatures and load conditions. The usual bias network is of such high impedance and poor thermal regulation that at the extremes of operation, bias currents are ineffectively controlled. A ...
-
Coda 10.5 - page 12
II. Parts' Quality 1. Finishes - All exterior metal parts are anodized or powder coated. Anodizing for its multiple finishing and powder coating for durability. 2. Circuit Boards - Circuit boards are fiberglass epoxy with gold plating over a tin/nickel barrier. This gold layer will not corrode, while the barrier plate prevents the gold from mi ...
-
Coda 10.5 - page 13
12 TECHNICAL DA T A AMPLIFIER 10.5 Rated Power: 100 Watts with 25 Watts class A @ 8 Ohms both channels driven from 20Hz to 20kHz Frequency Response: DC to -3dB @ 100kHz Distortion: < .1 percent from 10Hz to 20kHz @ 100 Watts both channels driven into 2 Ohm through 8 Ohms Gain: 26dB Maximum Current: >80 Amperes peak per channel Noise: -100dB r ...
-
Coda 10.5 - page 14
13 CARE and HANDLING The interior of the unit requires no special care. If it becomes necessary to clean the exterior, a simple dusting may be all that is required. If a cleaner is necessary, any dilute commercial ammonia based product will be appropriate. NEVER use any abrasive rags, cleaners or chemical solvents on the AMPLIFIER 10.5. When handli ...
-
Coda 10.5 - page 15
14 W ARRANTY I. Warranty- Any failure of the Amplifier 10.5 to operate or to meet specifications, applicable at time of manufacture, due to a manufacturing defect or component failure, will be corrected by Coda Technologies, Inc. without charge for parts, or labor for a period of ten years from date of original purchase. Coda Technologies, Inc. wil ...
-
Coda 10.5 - page 16
MODEL DESIGNATION: __________________________________ SERIAL NUMBER: ______________________________________ DATE OF PURCHASE: PLACE OF PURCHASE Dealer:___________________________________________ Address:__________________________________________ City:_____________________ State:____ Zip:__________ Phone:____________________________________________ ...
-
Coda 10.5 - page 17
MODEL DESIGNATION: __________________________________ SERIAL NUMBER: ______________________________________ DATE OF PURCHASE: PLACE OF PURCHASE Dealer:___________________________________________ Address:__________________________________________ City:_____________________ State:____ Zip:__________ Phone:____________________________________________ ...
-
Coda 10.5 - page 18
ADDRESS Coda Technologies, Inc. 9941 Horn Road Suite A Sacramento, CA 95827 Phone: (916) 363-4653 Fax: (916) 363-4627 16 ...
¿Tienes una pregunta acerca de Coda 10.5?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Coda 10.5, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Coda 10.5 probablemente compartirá una forma de solucionarlo.