-
Haier WMS656 - page 1
WMS656 T win-tub Washing Machine User's manual Names of the parts.............the 2 nd cover Safety precautions ...............................1 Installation and adjustment ..................3 Introduction of the major functions .......5 Preparation before washing ................6 The musts in washing .........................7 Usage of the d ...
-
Haier WMS656 - page 2
Before Using Before Using Names of the par ts Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal saf ...
-
Haier WMS656 - page 3
If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean. Before Using Before Using Safety precautions In case the washing machine is installed on ground with carpet , do not block the ventilation hole with carpet. Do not us ...
-
Haier WMS656 - page 4
Before Using Before Using Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Handicapped or children without care shall not use the machine. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter t ...
-
Haier WMS656 - page 5
Before Using Before Using Installa tion and adjustment Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 10cm , or the drainage will not be smooth enough and cause incomplete drainage. 2.Do not tramp or press the drain hose. 4.If extra drain hose is needed , please make separ ...
-
Haier WMS656 - page 6
Before Using Before Using How to change the direction of the drain hoses Side sectional view Extend the drain hose from the rear side Figure 1 indicates the ex factory installation position of the drain hose. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. T ake off t he drain hose from the cabin ...
-
Haier WMS656 - page 7
Before process Before process Intr oduction of the major function The machine has good comprehensive performance, and nice appearance. It adopts streamline appearance and full plastic shell, which will never get rust. For the design on safety and reliability , it adopts the wash shelf, spin shelf and water inlet groove design, and reduces the unfav ...
-
Haier WMS656 - page 8
Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please mak ...
-
Haier WMS656 - page 9
Reference weight of the laundries Working suit up,down Jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest wash capacity of ...
-
Haier WMS656 - page 10
Selection of the quantity of the washing powder list 1 Selection of the current , water level and washing time list 2 How to use the washing powder How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to ...
-
Haier WMS656 - page 11
Washing sequence Using process Using process Wash DRAIN STRONG ST ANDARD Spin timer SPIN TIMER Wash timer WASH TIMER WASH SELECTOR Wash selector (T o set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). (Strong current, standard current) (to set to below 1 minute, first set to 2 minute then ...
-
Haier WMS656 - page 12
Using process Using process Midway spinning 1. 2. 3. Put the laundries into the spin tub evenly and smoothly . Spin Run the foam-removing spinning. Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Put the gland in properly. Please put in the gland properly even if the laun ...
-
Haier WMS656 - page 13
Using process Using process Rinse with stored water Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.5kg, please use STANDARD current. If you use ...
-
Haier WMS656 - page 14
Using process Using process Selection of the spin time list 3 Laundries Spin time (minutes) About 4~5 Bed sheet or blanket About 2~4 Underwear (knitwear) Swear (chemical fiber) About 1~2 Within 1 minute Blending thin laundries 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and out ...
-
Haier WMS656 - page 15
Using process Using process Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1 T ake off the overflow filter. As indicated in the figure, nip the ...
-
Haier WMS656 - page 16
Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Using process Using process Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow fi ...
-
Haier WMS656 - page 17
T rouble-shooting Answer to question When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "W ASH SELECTOR" at "STRONG" or "ST ANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. W ...
-
Haier WMS656 - page 18
T rouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do n ...
-
Haier WMS656 - page 19
User's manual One piece One piece One piece One piece One set Water inlet hose Water-filling jointer Gland Twin-tub washing machine Packing list One piece Lint filter ...
-
Haier WMS656 - page 20
Type Model Power source Water level Water quantity about Rated washing capacity kg Rated input power W Dimension(mm) Wash pattern Weight kg Injection pressure Rated spinning capacity kg Twin-tub washing machine WMS656 Maximum/43L Medium/36L Minimum/30L 7.0 5.0 Wash 320 Spin 150 L780 W440 H900 New current 23.5 0.02MPa~0.2MPa Specification Rated volt ...
¿Tienes una pregunta acerca de Haier WMS656?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Haier WMS656, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Haier WMS656 probablemente compartirá una forma de solucionarlo.