-
Jura Capresso E30 - page 1
IMPRESSA E30 Instructions for use 03/01 Art. Nr. 62515 ...
-
Jura Capresso E30 - page 2
Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.com Kundendienst Telefon 062 389 82 33 The Impressa E30 is identical in construction and engineering with the Impressa E50/E55 mentioned in the operating instructions . ...
-
Jura Capresso E30 - page 3
Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 1 2 ...
-
Jura Capresso E30 - page 4
Instructions for use Jura Impressa E50/E55 1. Water volume selector switch 2. Selector button for pre-ground coffee powder 3. Coffee button 2 cups 4. Rinsing button 5. Coffee button 1 cup 6. ON/OFF switch 7. Display with warning lamps 8. Water tank with carrying handle 9. Height-adjustable coffee-spout 10. Filler funnel for pre-ground coffee 11. Co ...
-
Jura Capresso E30 - page 5
5 Contents Jura Impressa E50/E55 1. Description .................................................... page 6 1.1 Meaning of symbols in the display ................ page 6 2. Safety instructions .......................................... page 6 2.1 Warnings ................................................ page 6 2.2 Safety precautions ............... ...
-
Jura Capresso E30 - page 6
6 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future. Should you require further information or should particular pro- blems occur that are not dealt with in these operating instructions in ...
-
Jura Capresso E30 - page 7
7 Never use a faulty machine or one with a damaged power cable. Never immerse the machine in water. 2.2 Safety precautions Never expose the machine to the effects of rain, snow or frost and never operate it with wet hands. Place your espresso/coffee machine on a solid level surface. Never leave it on a surface that is warm or hot (h ...
-
Jura Capresso E30 - page 8
8 You have the following possibilities to adjust the grade of grinding the smaller the dots, the finer the grinding the bigger the dots, the coarser the grinding Important: The grinding grade should only be adjusted while the grinder is working. 3.6 Adjusting for water hardness The water is heated inside the machine. With use, this leads to cal ...
-
Jura Capresso E30 - page 9
9 Note: It is only necessary to adjust the water hardness before the machine is used for the first time or when a diffe- rent quality of water is used. If no water hardness level is changed within 30 seconds, the display goes out and the last value programmed remains unchanged. 3.7 Adjustable automatic close-down You can adjust the automatic close- ...
-
Jura Capresso E30 - page 10
10 7. Drawing off espresso/normal coffee Switch on the machine by pressing button. The machine is ready as soon as the warning lamp lights up. Place 1 or 2 cups under the coffee-spout and press the appro- priate button. The pre-brew function (P.B.A.S © ) moistens the coffee powder, briefly interrupts the flow and then the real brewing process ...
-
Jura Capresso E30 - page 11
11 Important: When steam is first drawn off, there is a possibi- lity of spattering. The pivoting nozzle becomes hot. Avoid direct contact with the skin. 8.1 Resetting to stand-by status Place a container under the pivoting nozzle (13). Turn selector switch for hot-water/steam (12) to position . Push button and draw off water until wate ...
-
Jura Capresso E30 - page 12
12 11.8 Regular servicing Regular Jura services ensure your machine’s reliability and longer life. Keep the original packaging to protect the machine when it is transported. 11.9 Empty system Important: This process is necessary to protect the machine from frost damages while being transported. Press button to switch off the machine. Plac ...
-
Jura Capresso E30 - page 13
13 Switch on machine by pressing button. Push button for about 3 seconds. Warning lamps , (if necessary) , light up. Fill water tank. Empty drip tray and grounds container and replace them. War- ning lamps (if necessary) go out. Place a container under the coffee-spout (9). Put a Jura cleaning tablet (Fig. 9) into the powder ...
-
Jura Capresso E30 - page 14
14 The flashing of warning lamp indicates that the decalcifying program is activated. If warning lamp lights up, empty drip tray (if necessary). Warning lamps , , , flash and warning lamp lights up. Turn selector switch for hot-water/steam (12) back to position . The decalcifying program is continued and the decalcifying soluti- on is chann ...
-
Jura Capresso E30 - page 15
15 16. Messages Display Cause Action System empty Fill the system (see chapter 4.1) System too hot after drawing off steam Re-set to coffee ready Selector switch in wrong position Re-set to correct position General troubles 1. – Switch off – Disconnect from mains power – Connect machine to mains power – Switch on machine 2. Have the machine ...
-
Jura Capresso E30 - page 16
16 Display Cause Action Cleaning necessary Run cleaning program Decalcifying necessary Run decalcifying program 17. Problems Problem Cause Action Coffee flow is stopped after – Beans container is empty – Fill in beans pre-brewing – Not enough coffee powder – Measure powder correctly Grinder is extremely noisy – Alien element in grinder ? ...
-
Jura Capresso E30 - page 17
17 18. Legal information These operating instructions contain all the information necessary for the correct use, operation and maintenance of your espresso/ coffee machine. Understanding and complying with the directions contained in these operating instructions are essential to ensure that the machi- ne is utilised without risk and to ensure safet ...
¿Tienes una pregunta acerca de Jura Capresso E30?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Jura Capresso E30, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Jura Capresso E30 probablemente compartirá una forma de solucionarlo.