-
Life Fitness SM40 - page 1
M051-K50-C121 1 4 STA CK MULTI-JUNGLE (SM40) UNPA CKING A ND A SSEMBLY INSTRUCTIONS ...
-
Life Fitness SM40 - page 2
SM40 U npacking & Assembly Instructions 2 The SM40 c om es partially assem bled. Follow the steps below to com plete the as sem bly. WA RNING: COMPONENTS O F THE SM40 ARE LARGE AND HEAVY. USE CAUTION WHEN ASSEMBLING T HIS MACHINE. MA TERIA LS A ND TOOLS REQUIRED FOR A SSEMBL Y 1/2”, 3/8”, 5/8” & 9/16” Sock et wrench with extension 1 ...
-
Life Fitness SM40 - page 3
SM 40 Unpacking & Assembly Instr uctions 3 UNPA CKING Follow the steps below when unpacking the c om ponents of the SM40. 1. Cut off the shipping wrapper. 2. Remove the parts box a nd shipping boards. 3. Remove the item s in the parts box . These item s are shown in Figure 1. A. Remove the bolts bag. B. Remove the par ts shown below. Parts that ...
-
Life Fitness SM40 - page 4
SM40 U npacking & Assembly Instructions 4 A SSEMBLY Figure 2 shows an ass em bled SM40. Figure 2. SM40 main components (seats and cables remov ed for clarity). 1. Cube 2. Low row bench 3. Lat bench 4. Lat top 5. Tric ep top 6. Adj. X -over top 7. 150 lb. W eight stack s (2) 8. 300 lb. W eight stack s (2) 1. Place the w eight cub e in its final ...
-
Life Fitness SM40 - page 5
SM 40 Unpacking & Assembly Instr uctions 5 Figure 3. Configura tion for 2-3/4” and 3” bolts. 2. Bolt on the teardr op pulle ys above the benches ( see Figure 3) us ing four 3/8” x 2- 3/4” hex head bolts. Inc lude the 3/8” flat washer, end cap washer s, end caps and 3/8” Ny loc (lock nut). Use the bolt c onfiguration s hown in the fi ...
-
Life Fitness SM40 - page 6
SM40 U npacking & Assembly Instructions 6 3. Mount the tops. Mount the 56” lat top to the cell by inserting two of the large 7/16” by 6” bolts using the hardware c onfiguration s hown in Figure 5. Use a 5/8” soc ket with extension and com bination wrenc h. Mount the 29” tricep top and adj ustable cr ossover top to the fram e and c onn ...
-
Life Fitness SM40 - page 7
SM 40 Unpacking & Assembly Instr uctions 7 4. Install the w eight stacks. To do this : A. Using a 9/16” soc ket and c om bination wrench, rem ove the tric ep back rest bolts (see Figure 10) . B. Using a 9/16” soc ket and c om bination wrench, unbolt the top plate and rem ove the guide rods (s ee Figure 10). Figure 7. Remov e the tricep b ac ...
-
Life Fitness SM40 - page 8
SM40 U npacking & Assembly Instructions 8 F. W ith the top plate on the guide rods, bolt on the top plate to the top of the cells as shown in Figure 8 using a 9/16” s ock et and com bination wrench and the 3” bolts (with cap washers) that were previously inserted. Figure 8. Bolt on the top pla t e. 5. Bolt the f loating pu lley into the 190 ...
-
Life Fitness SM40 - page 9
SM 40 Unpacking & Assembly Instr uctions 9 6. Mount adjustable pulley bracket. W hen shipped, the adjustable pulley brack et looks like the one s hown in Figure 10. The bolts need to be rem oved and the brack et needs to be positioned so that the top of the brack et is in the top hole as shown by the ar row in Figure 10. Use a 3” bolt with fl ...
-
Life Fitness SM40 - page 10
SM40 U npacking & Assembly Instructions 10 Figure 12. Bolt t he benches to the frame. ...
-
Life Fitness SM40 - page 11
SM 40 Unpacking & Assembly Instr uctions 11 INSTA LLING THE CABLES The SM40 us es four cables. T here are thr ee diff erent types of cable used on the SM40. T hey are: 1. Adjustable c able (ball end cable) ( 1). 2. Low row cable (the long cable) ( 1). 3. Lat pulldown and tricep cables ( 2). The lat and tric ep cables c an be identified by their ...
-
Life Fitness SM40 - page 12
SM40 U npacking & Assembly Instructions 12 ADJUSTABLE CROSSOVER CABLE RO UTI NG Once you’ve removed the pulleys as desc ribed previously, route the cros sover cable as shown in Figure 14. Figure 14. Adjustable crossov er cable routin g. ...
-
Life Fitness SM40 - page 13
SM 40 Unpacking & Assembly Instr uctions 13 Figure 15. Adjustable crossover cab le end detail. Using a 7/8” wrench, tighten the j am nut onto the adjustable pulley threads as shown in Figure 15. Place a rubber c ap on the top of the cable as shown in Figure 15 (right) . LOW RO W CABLE RO UTING Route the low row cables as shown in Figure 16. F ...
-
Life Fitness SM40 - page 14
SM40 U npacking & Assembly Instructions 14 Bolt the cable to the weight stack s as s hown in Figure 17. Thr ead the 7/8” nut up on the cable bolt as shown at lef t. Screw the bolt down into the weight stack as shown at right. Tighten the bolt with a 7/8” com bination wrench. Figure 17. Screw the cable in to th e weigh t stack. LAT PULLDOWN ...
-
Life Fitness SM40 - page 15
SM 40 Unpacking & Assembly Instr uctions 15 TRICEP PUSHDOW N CABLE RO UTI NG Route the tricep pushdown cable as shown in Figure 19. Screw the cable into the weight stac k as shown previously in Figure 17. Figure 19. Tricep pus hdow n cable routing. ...
-
Life Fitness SM40 - page 16
SM40 U npacking & Assembly Instructions 16 HA RDWARE 0123456 ½½½½½½ Hardware F igure 1. Assembly Parts. ...
-
Life Fitness SM40 - page 17
SM 40 Unpacking & Assembly Instr uctions 17 The parts shown in Hardware Figure 1 are us ed to assem ble the SM40. T hey are: A. 7/16” x 6” hex head bolt (used to bolt the tric ep top beam , adjustable c rossover top beam, lat top beam s , and connecting beam to the tops of the cubes ) B. 7/16” flat washer C. 7/16” cap washer ( used on t ...
-
Life Fitness SM40 - page 18
SM40 U npacking & Assembly Instructions 18 The part s hown in Hardware Figure 3 is the 9/16” c able jam nut that’s used to s ecure the cables to the weight stack s. Hardware Figure 3. Cable ja m nut. M. Cable jam nut Hardware Figure 4 shows the types of cables that ar e included with the SM40. Hardware Figure 4. Cables . N. Lat pulldown cab ...
-
Life Fitness SM40 - page 19
SM 40 Unpacking & Assembly Instr uctions 19 Hardware F igure 5. T op assemblies. S. Teardr op pulleys (bolt on above tricep station, lat pulldown and seated row benches ) T. 56” Lat top (bolt to top of c ells with pulley s above lat benches) U. 29” Tr icep top (bolt on to 56” lat top bar ) V. Adjustable c rossover top (bolt on to 56” la ...
-
Life Fitness SM40 - page 20
SM40 U npacking & Assembly Instructions 20 Hardware Figure 6. Weight stack rubber bumpers. W . W eight s tack rubber bum pers (inserted under weight stac ks ) Hardware Figure 7. Floating pulle y. X. Floating pulley (bolt to 190 lb weight stacks other than tricep pus hdown stack ) ...
-
Life Fitness SM40 - page 21
SM 40 Unpacking & Assembly Instr uctions 21 PA RTS LIST Part # ID Description Quantity Main components 1 2 3 4 5 6 7 8 Cubes Low row bench Lat bench Lat tops Tr icep top Adj. cro ssover top 300 lb weight stack 190 lb weight stack 1 1 1 1 1 1 2 2 0017-00042-0936 0017-00103-0234 Cables, caps & nuts L M N P Q R Rubber cap Cable jam nut Lat pul ...
-
Life Fitness SM40 - page 22
SM40 U npacking & Assembly Instructions 22 0017-00101-1413 0017-00104-0368 0017-00103-0217 Pulley hardw are (installed) 1-3/4” Bolt Cap washer 3/8” Nyloc nut 0017-00101-1413 0017-00104-0313 0017-00103-0217 Floating pulley hardware (installed) 1-3/4” Bolt Flat washer 3/8” Nyloc nut ...
¿Tienes una pregunta acerca de Life Fitness SM40?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Life Fitness SM40, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Life Fitness SM40 probablemente compartirá una forma de solucionarlo.