-
Kawasaki 840051 - page 1
COMPONENT #840051 87-1904-60957 KAW ASAKI™ IS A TRADEMARK LICENSED BY KAW ASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2005 ALL TRADE TOOLS, LLC. 1431 VIA PLA T A LONG BEACH, CA 90810-1462 USA 840051 – 1/2" Corded Impact Wrench 1/2 " IMPACT ...
-
Kawasaki 840051 - page 2
CONGRA TULA TIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for , this tool will give you many years o ...
-
Kawasaki 840051 - page 3
WORK AREA Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children, and visitors away while operating a power tool ...
-
Kawasaki 840051 - page 4
SAFETY RULES FOR IMP ACT WRENCHES Use only impact sockets. Non-impact sockets may shatter or break causing injury and/or damage. Ensure fastener and/or system will withstand the level of torque generated by the tool. Excessive torque may cause breakage and possible personal injury . Always wear safety goggles or eye protection when using this tool. ...
-
Kawasaki 840051 - page 5
OPERA TING INSTRUCTIONS CONTROLS AND COMPONENTS: 1. Rocker Switch 2. Gear Enclosure 3. Brush Caps 4. Anvil COMPONENT MODEL NUMBER CARBON BRUSHES 690296 8 SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will als ...
-
Kawasaki 840051 - page 6
ROCKER SWITCH AND DIRECTION OF ROT A TION • T o rotate the Impact Wrench in a clockwise direction, press the lower portion of the Rocker Switch. • T o rotate the Impact Wrench in a counter -clockwise direction, press the upper portion of the Rocker Switch. INST ALLING / REMOVING SOCKET When installing a socket, align the holes in the side of th ...
-
Kawasaki 840051 - page 7
component thereof is modified or altered. This warranty does not apply to any other product and/or component thereof manufactured or distributed by Alltrade, and does not apply to products and/or components thereof designed, manufactured and/or assembled by others, for which Alltrade makes no warranties whatsoever . THERE ARE NO WARRANTIES WHICH EX ...
-
Kawasaki 840051 - page 8
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT . ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENT A TIONS BY ALL TRADE AND/OR ITS REPRESENT A TIVE(S) REGARDING THE DESIGN, MANUF ACTURE, PURCHASE, USE AND/OR OPERA TION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY , GUARANTY AND/OR RE ...
-
Kawasaki 840051 - page 9
COMPONENT #840055 19.2V 2-SPEED BATTERY-OPERATED DRILL INSTRUCTION MANUAL KAW ASAKI™ IS A TRADEMARK LICENSED BY KAW ASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2008 ALL TRADE TOOLS, LLC. 1431 VIA PLA T A LONG BEACH, CA 90810-1462 USA 840055 – 19.2V ...
-
Kawasaki 840051 - page 10
SECTION FOUR MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SPECIFICA TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PROTECTING THE ENVIRONMENT . . . . . . . . ...
-
Kawasaki 840051 - page 11
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury . CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury . CA ...
-
Kawasaki 840051 - page 12
Recharge only with the charger specified by the manufacturer . A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injur y and fire. When battery pack is not in use, ...
-
Kawasaki 840051 - page 13
SYMBOLS IMPORT ANT : Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer . SYMBOL NAME EXPLANA TION V Volts Voltage (Potential) A Amperes Current Hz Hertz Frequency (Cycles per Second) W Watt Power Kg Kilograms W ...
-
Kawasaki 840051 - page 14
FUNCTIONAL DESCRIPTION CONTROLS AND COMPONENTS: 1. Battery Pack 2. Release Buttons on Each Side 3. 120V AC Adapter 4. Charger 5. LED Charging Indicator 6. 10mm (3/8") Keyless Chuck 7. 24+1 Adjustable T orque Settings Control Ring 8. Forward/Reversing and T rigger Lock Lever COMPONENT MODEL NUMBER BA TTERY P ACK 691235 120V AC ADAPTER 690074 CH ...
-
Kawasaki 840051 - page 15
REMOVING/A TT ACHING BA TTERY P ACK REMOVE BA TTERY P ACK: 1. Press both release buttons on either side of the Cordless Drill to release the battery pack. 2. Pull battery pack free of Cordless Drill. A TT ACH BA TTERY P ACK: 1. Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Drill. 2. Press th ...
-
Kawasaki 840051 - page 16
V ARIABLE SPEED TRIGGER SWITCH THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH: • The speed of the Cordless Drill depends on the amount of pressure you put on the trigger . • The more pressure you apply , the faster the Cordless Drill will go. • Release the pressure and the Cordless Drill will slow down. BUIL T IN LED LAMP • Press the trigger s ...
-
Kawasaki 840051 - page 17
SCREWDRIVING WHEN DRIVING F ASTENERS: • Always start slowly and gradually increase the speed of the Drill. • Release the trigger when you feel the clutch slip. • Always keep the driver bit straight to prevent damage to the screw . • Hold the Drill with both hands to ensure control if the bit should stick or slip. • T o prevent wood from s ...
-
Kawasaki 840051 - page 18
Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth. Never open the Cordless Drill case, battery pack or charger . Do not attempt to repair the Cordless Drill, battery pack or charger yourself. Opening any of these parts will void your warranty . ACCESSORIES Use only accessories that are recommended b ...
-
Kawasaki 840051 - page 19
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This Kawasaki™ portable power tool is offered as a home use tool and carries a HOME USE WARRANTY . This tool is made for home use in the execution of projects and repairs in and around the home. Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty . T ...
-
Kawasaki 840051 - page 20
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P AR TICULAR PURPOSE. NO WARRANTY , ORAL OR WRITTEN, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT . ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENT A TIONS BY ALL TRADE AND/OR ITS REPRESE ...
-
Kawasaki 840051 - page 21
COMPONENT #840051 19.2V BATTERY PACK INSTRUCTION MANUAL 87-1904-60957 KAW ASAKI™ IS A TRADEMARK LICENSED BY KAW ASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2006 ALL TRADE TOOLS, LLC. 1431 VIA PLA T A LONG BEACH, CA 90810-1462 USA 840051 – 19.2V Batt ...
-
Kawasaki 840051 - page 22
CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. BA TTERY Before using battery pack, please read caref ...
-
Kawasaki 840051 - page 23
PROTECTING THE ENVIRONMENT BA TTERIES Alltrade batteries can be recharged many times. At the end of their useful life, recy- cle batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. T ake them to your local recycling center or call 1-800- 822-8837 . Collected batteries will be recycled or disposed of properly . OT ...
-
Kawasaki 840051 - page 24
to determine whether any item or part is nonconforming and, if so, whether the item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or ...
-
Kawasaki 840051 - page 25
REPRESENT A TIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO EVENT , WHETHER AS A RESUL T OF A BREACH OF CONTRACT , WARRANTY , TOR T (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALL TRADE’S AND/OR ITS REPRESENT A TIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT . ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT ...
¿Tienes una pregunta acerca de Kawasaki 840051?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Kawasaki 840051, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Kawasaki 840051 probablemente compartirá una forma de solucionarlo.