-
National Instruments RT Series - page 1
RT Series DAQ Device User Manual RT Series DAQ Device User Manual April 2001 Edition Part Number 322635 B-01 ...
-
National Instruments RT Series - page 2
Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 794 0100 Worldwide Offices Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Brazil 011 284 5011, Canada (Calgary) 403 274 9391, Canada (Ottawa) 613 23 ...
-
National Instruments RT Series - page 3
Important Information Warranty The RT Series DAQ hardware is warranted against defects in mat erials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defecti ve during the warranty period. This ...
-
National Instruments RT Series - page 4
Compliance FCC/Canada Radio Frequency Interference Compliance* Determining FCC Class The Federal Communication s Commission (FCC) has rules to protect wireless comm unications from interference. The FCC places digital electronics into two classes. These classes ar e known as Class A (for use in industrial- commercial locations only) or Class B (for ...
-
National Instruments RT Series - page 5
interference to radio or telev ision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measur es: • Reorient or relocate the receiving a ntenna. • Increase the separation between the equipment and receiver. • Connect the equipment i ...
-
National Instruments RT Series - page 6
© National Instruments Corporation vii RT Series DAQ Device User Manual Contents About This Manual Conventions ............ ........... .............. ............ ........... .............. ........... ............ .............. .... i x Related Documentation ............... ........... ........... .............. ............ .............. .... ...
-
National Instruments RT Series - page 7
Contents RT Series DAQ Device U ser Manual viii ni.com Real-Time Programming .......... .............. ........... ............ .............. ........... ........... ............ 4-4 Running a VI at Time-Cri tical Priority wit hout the RT Development System ...... ............... ........... .............. ........... ............ .............. 4 ...
-
National Instruments RT Series - page 8
© National Instruments Corporation ix RT Series DAQ Device User Manual About This Manual This manual contains inform ation about the R T Series Data Acquisition (D A Q) devices and w orking w ith LabVIEW Real-Time (R T). The R T Series D A Q hardware consists of the following de vices: • PCI-7030/6040E • PCI-7030/6030E • PCI-7030/6533 • PX ...
-
National Instruments RT Series - page 9
About This Man ual RT Series DAQ Device U ser Manual x ni.com programs, subprograms, subroutines, device names, functions, operations, v ariables, fil enames and extensio ns, and code excerpts. Related Documentation The following documents contain information that you might find helpful as you read this manual: • LabVIEW Real- Time User Manual ? ...
-
National Instruments RT Series - page 10
© National Instruments Corporation 1-1 R T Series D AQ Device User Manual 1 Introduction This chapter describes the RT Series DAQ devices, lists what you need to get started, explains how to unpack your RT Series DAQ device, and describes the softwa re you need to use. About the R T Series The RT Series DAQ devices are multifunction DAQ devices wi ...
-
National Instruments RT Series - page 11
Chapter 1 Introduction RT Series DAQ Device User Manual 1-2 ni.com What Y ou Need to Get Started To set up and use your RT Series DAQ device, you need the follo wing: ❑ One of the follo wing de vices: – PXI-7030/6 XXX – PCI-7030/6 XXX ❑ This manual ❑ Hardware user manual for your D A Q daughterboard, s h o w ni nT a b l e1 - 1 ❑ LabVIEW ...
-
National Instruments RT Series - page 12
Chapter 1 Introduction © National Instruments Corporation 1-3 R T Series D AQ Device User Manual Unpacking Your RT Series DAQ device is shipped in an antistatic packag e to prevent electrostatic damage to the device. Electrostatic discharge can damage several components on the device. To avo id such damage in handling the device, take the foll owi ...
-
National Instruments RT Series - page 13
© National Instruments Corporation 2-1 R T Series D AQ Device User Manual 2 Installation and Configuration This chapter explains how to install and confi gure your RT Series DAQ hardware. Installing th e Hardware You can install the RT Se ries DAQ device in any available expansion slot in your computer or PXI chassis. To reduce noise, however, lea ...
-
National Instruments RT Series - page 14
Chapter 2 Installation and Configuration RT Series DAQ Device User Manual 2-2 ni.com Y our R T Series DA Q dev ice is installed. Y ou are no w ready to configure your software. PXI Installation Complete the following steps to install your RT Series PXI board. 1. T urn off and unplug your computer . 2. Choose two adjacent unused PXI slots in your sy ...
-
National Instruments RT Series - page 15
Chapter 2 Installation and Configuration © National Instruments Corporation 2-3 R T Series D AQ Device User Manual Figure 2-1. Measurement & Automation Explorer Notice that MAX assigns s eparate de vice numbers to th e PCI/PXI-7030 de v ice and the D A Q daughterboard, as shown in Figure 2-1. The D A Q daughterboard is sho wn as a separate dev ...
-
National Instruments RT Series - page 16
Chapter 2 Installation and Configuration RT Series DAQ Device User Manual 2-4 ni.com daughterboard directly , e ven though the D A Q daughterboard is configured as a separate device. Only LabVIEW R T applications targeted to the R T Series D A Q device can access the D A Q daughterboard. Tip If you want to test whether the DA Q daughterboard is wor ...
-
National Instruments RT Series - page 17
© National Instruments Corporation 3-1 R T Series D AQ Device User Manual 3 Hardware Over view This chapter describes the PCI and PXI RT Series DAQ hardware. You can find most of the hardware information you need in your DAQ device user manual. Table 1-1, RT Series DAQ Device and Correspondin g DAQ Device Manual , lists the DAQ devi ce user manual ...
-
National Instruments RT Series - page 18
Chapter 3 Hardware Over view RT Series DAQ Device User Manual 3-2 ni.com Figure 3-2. PXI RT Series Data Acquisition Hardware Processor Board The 7030 processor board contains a microprocessor and support circuitry, as shown in Figure 3-3. The support circuit ry includes a chipset with PCI controller and ISA bridge, main memory (DRAM), L2 cache (SRA ...
-
National Instruments RT Series - page 19
Chapter 3 Hardware Over view © National Instruments Corporation 3-3 R T Series D AQ Device User Manual Figure 3-3. RT Series Processor Board Diagram Embedded ISA Bus Embedded CPU Bus Processor Board BIOS ISA Bridge Controller Shared Memory CPU I/O Daughterboard SRAM/DRAM Shared Memory Interface BIOS Extension Cache Memory PCI Controller Host PCI B ...
-
National Instruments RT Series - page 20
Chapter 3 Hardware Over view RT Series DAQ Device User Manual 3-4 ni.com DAQ Daughterboard The daughterboard in the RT Series system pro vides the DAQ functionality. Each daught erboard is a National Instrument s DAQ device with some mechanical modifications to allow it to connect to the processor board. You can expect the same high performance and ...
-
National Instruments RT Series - page 21
Chapter 3 Hardware Over view © National Instruments Corporation 3-5 R T Series D AQ Device User Manual information about how to use the R TSI signals. Tab le 1-1, RT Series DAQ Device and Corresponding DAQ Device Manual , lists the correspon ding manual for each available daughterboard. LEDs The RT Series processor board has two LEDs. You can use ...
-
National Instruments RT Series - page 22
© National Instruments Corporation 4-1 R T Series D AQ Device User Manual 4 LabVIEW R T Programming This chapter provides an overview of using LabVIEW Real-Time (RT) an d your RT Series DA Q hardware. T argeting LabVIEW R T and Downloading VIs In LabVIEW RT, select Operate » Switch Execution Target to access the Select Target Platform dialog box, ...
-
National Instruments RT Series - page 23
Chapter 4 LabVIEW R T Programming RT Series DAQ Device User Manual 4-2 ni.com Select Target Platform dialog box to launch MAX and con figure your R T Series D A Q devices . Resetting the R T Series DAQ Device Resetting the RT Series DAQ device is necessary only after you first t urn on the system or if communication wit h the RT Engine cannot be es ...
-
National Instruments RT Series - page 24
Chapter 4 LabVIEW RT Progr amming © National Instruments Corporation 4-3 R T Series D AQ Device User Manual T o disable the Select T arget Platform dialog box, specify the target platform in the command line argument of your built ex ecutab le using –target . For e xample, c:mybuiltapp_rtengine.exe -target D AQ::3 (fo r device 3) or to run the ...
-
National Instruments RT Series - page 25
Chapter 4 LabVIEW R T Programming RT Series DAQ Device User Manual 4-4 ni.com Real-T ime Programming This section provides an overview of real-tim e programming using your RT Series DAQ hardware. Running a VI at T ime-Critical Priority without the R T Development System Instead of using TCP/IP or VI Server t o communicate data to a host PC applicat ...
-
National Instruments RT Series - page 26
Chapter 4 LabVIEW RT Progr amming © National Instruments Corporation 4-5 R T Series D AQ Device User Manual hardware for these changes to take ef fect. How ever, unlike virtual channels, you can set device parameters or accessory configuration information programmatically inside a VI wit hout running MAX. Therefore, you can programmatically change ...
-
National Instruments RT Series - page 27
© National Instruments Corporation A-1 RT Series DAQ Device User Manual A Specifications This appendix lists t he specifications of the embedded processor syst em. Processor Processor ............. .......................... ......... AMD 486 DX5 32-bit architecture Processor clock speed ............. ............... 133 MHz CPU bus speed ........ ...
-
National Instruments RT Series - page 28
Appendix A Specifications RT Series DAQ Device User Manual A-2 ni.com Power Requirement PCI-7030 only (without daughterboard) .......... .............. .1.9 A at +5 VDC (±5%) PXI-7030 only (without daughterboard) .......... .............. .2.0 A at +5 VDC (±5%) Note T o calculate the total power requirement, add the p rocessor board requirement f ...
-
National Instruments RT Series - page 29
© National Instruments Corporation B-1 RT Series DAQ Device User Manual B T echnical Support Resources W eb Support National Instruments W eb support is your first stop for help in solving installation, configuration, and application pro blems and questions. O nline problem-solving and di agnostic resources include frequ ently asked questions, kno ...
-
National Instruments RT Series - page 30
Appendix B T echnical Support Resources RT Series DAQ Device User Manual B-2 ni.com W orldwide Support National Instruments has of fices located around the world to help address your support needs. Y ou can access our branch of fice W eb sites from the W orldwide Of fices section of ni.com . Branch off ice W eb sites provide up-to-date contact info ...
-
National Instruments RT Series - page 31
© National Instruments Corporation G-1 RT Series DAQ Device User Manual Glossar y B BIOS basic input/output system — BIOS functions are t he fundamental le vel of an y PC or compatible co mputer . BIOS functions embo dy the basic operations needed for successful use of the computer hardware resources. bus the group of conductors that in terconne ...
-
National Instruments RT Series - page 32
Glossary RT Series DAQ Device User Manual G-2 ni.com de v ice Instrument or control ler that is addressable as a single entity and controls or monitors real-world I/O points. A device is often connected to the host computer through some type of communicatio n network or can be a plug-in de vice. For data acquisition (D A Q) applicatio ns, a D A Q d ...
-
National Instruments RT Series - page 33
Glossary © National Instruments Corporation G-3 RT Series DAQ Device User Manual V VI SA virtual instrume nt software archi tecture — an e wd r i v e rs o f t w a r e architecture developed by Nation a l Instruments to u nify instrumentation software GPIB, DAQ, a nd VXI. It has been accepted as a standard fo r VXI by the VX Iplug&p lay Syste ...
-
National Instruments RT Series - page 34
© National Instruments Corporation I-1 RT Series DAQ Device User Manual Index B board configuration, 2-2 to 2-4 bus interface specifications, A-1 C command-line arguments, 4-2 to 4-3 communication host-embedded communication shared memory, A-1 host-to-RT Series DAQ device communication, 3-4 configuration board configuration, 2-2 to 2-4 real-time p ...
-
National Instruments RT Series - page 35
Index RT Series DAQ Device User Manual I-2 ni.com LabVIEW RT programming, 4-1 to 4-5 creating stand-alone executables, 4-2 to 4-3 downloading VIs, 4-1 to 4-2 LabVIEW functions not supported on DAQ hardware, 4 -3 real-time programming, 4-4 to 4-5 configuration issues, 4-4 to 4-5 running VI at time-critical priority, 4-4 shared memory, 4-4 resetting ...
-
National Instruments RT Series - page 36
Index © National Instruments Corporation I-3 RT Series DAQ Device User Manual S shared memory host-embedded communication shared memory, A-1 real-time programming, 4-4 software programming ch oices, 1-3 specifications, A-1 to A-2 stand-alone executables, creating, 4-2 to 4-3 command-line arguments, 4-2 to 4-3 embedded applications, 4 -2 system int ...
¿Tienes una pregunta acerca de National Instruments RT Series?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con National Instruments RT Series, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con National Instruments RT Series probablemente compartirá una forma de solucionarlo.