-
Fisher PLC-SU22N - page 1
Owner's Man ual PLC-SU22N Multimedia Pr ojector MODEL ...
-
Fisher PLC-SU22N - page 2
2 INFORMA TION T O THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and ...
-
Fisher PLC-SU22N - page 3
3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments no ...
-
Fisher PLC-SU22N - page 4
4 T ABLE OF CONTENTS TRADEMARKS ● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. ● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. ● Windows and PowerPoint are registered trademarks of Microsoft Corporation. ● Each name of corporations or products ...
-
Fisher PLC-SU22N - page 5
5 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector is compatible with many different ty ...
-
Fisher PLC-SU22N - page 6
6 PREP ARA TION NAME OF EA CH P AR T OF THE PROJECT OR ...
-
Fisher PLC-SU22N - page 7
7 PREP ARA TION POSITIONING THE PR OJECT OR ● This projector is basically designed to project on a flat projection surface. ● The projector can be focused from 4.6’(1.4m) ~ 35.4’(10.8m). ● Refer to the figure below to adjust the screen size. H1 H2 300” 231” 200” 154” 150” 115” 100” 77” 40” 35.4’ (10.8m) 24.0’ (7.3m) ...
-
Fisher PLC-SU22N - page 8
8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least one meter away from any object. ● Make sure that there is no object on both sides of the projector. Those obstacles may prevent the projector from taking the cooling air through the side Air Intake Vent Slots. This projector is equipped cooling fans for protection fr ...
-
Fisher PLC-SU22N - page 9
9 PREP ARA TION MO VING THE PR OJECT OR Use the Carry Handle when moving the Projector. When moving the projector, replace the lens cover and rotate the feet fully clockwise (to shorten the feet) to prevent from damage to the lens and the cabinet. When this projector is not used for the extended period, replace the lens cover, tuck the Adjustable F ...
-
Fisher PLC-SU22N - page 10
10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Connect the computer output to this terminal. (Refer to P12, 13.) When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal. It ...
-
Fisher PLC-SU22N - page 11
S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT 11 CONNECTING THE PR OJECT OR CONNECTING T O THE VIDEO EQ UIPMENT Video Source (example) Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker (stereo) External Audio Equipment Audio Cable (Stereo) ✽ Termina ...
-
Fisher PLC-SU22N - page 12
12 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTING T O THE COMPUTER To connect with the computer, refer to the figure below. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Control Cable for Serial Port ✽ Control Cable for P ...
-
Fisher PLC-SU22N - page 13
13 CONNECTING THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL POR T COMPUTER IN MONIT OR OUT 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 3 4 5 6 ON 1 DIP ON OFF 23456 CONTROL PORT AUDIO OUT AUDIO IN MONITOR OUT COMPUTER IN U ...
-
Fisher PLC-SU22N - page 14
14 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTR OL V OLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL PA G E Used to select source either COMPUTER or MCI mode. (P23) Used to select VIDEO source. (P30) Used to execute the item selected or to expand the image in DIGITAL ZOOM mode. ( ...
-
Fisher PLC-SU22N - page 15
15 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER/ MCI D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL PA G E To insure safe operation, please observe the following precautions : ● Use (2) AA type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● ...
-
Fisher PLC-SU22N - page 16
16 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS NORMAL P A GE VOLUME MENU MODE SELECT ZOOM FOCUS ON–OFF LAMP READ Y W ARNING TEMP . LAMP REPLA CE AU TO I M AG E Used to open or close the MENU operation. (P17, 19) MENU BUTTON AUTO IMAGE BUTTON READY INDICATOR POWER ON–OFF BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR LAMP REPLACE INDICATOR ...
-
Fisher PLC-SU22N - page 17
SELECT 17 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears. Move the POINTER (red frame) to the ITEM ICON that you want to select by ...
-
Fisher PLC-SU22N - page 18
18 BEFORE OPERA TION MENU B AR IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P27) PC ADJUST MENU Used to adjust the parameters to match with the input signal format. (Refer to P24, 25) SETTING MENU Used to set the Display Menu and to reset Lamp Replacement Monitor Timer. (R ...
-
Fisher PLC-SU22N - page 19
19 VIEW MENU Used to display, read or write the image data in a memory card through the PC CARD SLOT. (Refer to P34, 35) MODE MENU Used to select the MCI input mode. (Refer to P33) MENU BAR IN MCI MODE Press MENU BUTTON while being in MCI mode. These icons have the same function as the Computer Mode. POSITION MENU Used to adjust the position of the ...
-
Fisher PLC-SU22N - page 20
20 B ASIC OPERA TIONS TURNING ON THE PR OJECT OR Connect the projector's AC power cord into a wall outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON. The LAMP POWER indicator dims, and the Cooling Fans start to operate. The Preparati ...
-
Fisher PLC-SU22N - page 21
21 B ASIC OPERA TION ADJUSTING THE IMA GE The message disappears after 4 seconds. The message disappears after 4 seconds. ZOOM ADJUSTMENT 1 Press the ZOOM button on the Top Control or the ZOOM ▲ / ▼ button on the Remote Control Unit to turn into the ZOOM mode. 2 Press the POINT UP button or the ZOOM ▲ button to have the image larger, and pres ...
-
Fisher PLC-SU22N - page 22
22 B ASIC OPERA TION Press the VOLUME (+/–) button(s) on the Top Control or on the Remote Control Unit to adjust the volume. The Volume dialog box appears on the screen for a few seconds. The VOLUME (+) button to increase the volume, and The VOLUME (–) button for decreasing. Press the MUTE button on the Remote Control Unit to cut off the sound. ...
-
Fisher PLC-SU22N - page 23
COMPUTER / MCI button 23 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE DIRECT OPERA TION Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit. MEN ...
-
Fisher PLC-SU22N - page 24
24 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which are different from the standard ones and may not be tuned by Multiscanning of this projector. If this happens, the projector cannot reproduce ...
-
Fisher PLC-SU22N - page 25
25 The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total lines Recalls the parameter data that previously adjusted. Reset Stores the parameters in the memory. Stored Clears the parameter data previously set in the selected Mode. Mode free Closes the PC ADJUST Menu. Quit The number of the total ...
-
Fisher PLC-SU22N - page 26
26 COMPUTER MODE Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 135 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31. ...
-
Fisher PLC-SU22N - page 27
27 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to c ...
-
Fisher PLC-SU22N - page 28
28 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog box AUTO IMAGE Menu will appear. Move the arrow to ...
-
Fisher PLC-SU22N - page 29
...
-
Fisher PLC-SU22N - page 30
30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE DIRECT OPERA TION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO button on the Remote Control Unit. MENU OPERA TION SELECTING COLOR SYSTEM Press t ...
-
Fisher PLC-SU22N - page 31
31 Each of the keys operates as follow. VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the ar ...
-
Fisher PLC-SU22N - page 32
...
-
Fisher PLC-SU22N - page 33
33 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select MCI and press the SELECT button. SELECTING MCI MODE DIRECT OPERA TION Select MCI mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit. MENU OPERA TION COMPUTER / MCI button COMPUTER MCI VID ...
-
Fisher PLC-SU22N - page 34
34 MCI MODE INDEX SELECTION P A GE SELECTION Move the arrow to each operation and press the SELECT button. 1 2 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select VIEW and press the SELECT button. Another dialog box VIEW SETTING menu will appear. Press the POINT DOWN button and a red-arrow icon wil ...
-
Fisher PLC-SU22N - page 35
35 MCI MODE WRITE D A T A INT O THE MEMOR Y CARD A CCESS T O THE MEMOR Y CARD THR OUGH THE PROJECT OR If your computer doesn't have the PC card writing equipment, the data can be written or read by connecting with this projector. NOTE : This operation can be made only by Media Card Imager in the Personal Computer. The data edited by Media Card ...
-
Fisher PLC-SU22N - page 36
The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. 36 MCI MODE PICTURE IMA GE ADJUSTMENT ADJUST THE PICTURE IMA GE MANU ALL Y The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote ...
-
Fisher PLC-SU22N - page 37
37 MCI MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. To adjust ...
-
Fisher PLC-SU22N - page 38
38 MCI MODE SMAR TMEDIA AND PC CARD AD APTER SmartMedia and PC Card Adapter are provided with this LCD projector. SmartMedia can be used as a PC card conforming to the PC Card Standard-ATA by combining with PC Card Adapter. INST ALL / REMO VE THE SMAR TMEDIA INSTALL Insert SmartMedia fully into PC Card Adapter. Make sure EJECT button pops out. NOTE ...
-
Fisher PLC-SU22N - page 39
39 MCI MODE ● SmartMedia is a precision device. Do not bend it, drop it, subject it to strong forces or shocks or place where strong static electrical charge can be generated. ● Do not touch the surface of the Contact Area with fingers or allow it to be stained with foreign materials. Store SmartMedia inside its protective case when it is not u ...
-
Fisher PLC-SU22N - page 40
40 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and r 0w k-0.re1111111111111sˇFT/RIGHT buttons to select ...
-
Fisher PLC-SU22N - page 41
41 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is usable when PC mouse pointer is displayed on the ...
-
Fisher PLC-SU22N - page 42
42 APPENDIX CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you don't use the projector, replace the lens cover. 1 3 Lightly wipe the cleaning cloth over the lens. 2 ...
-
Fisher PLC-SU22N - page 43
43 APPENDIX LAMP REPLA CEMENT INDICA T OR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image becomes dark or the color of the image become unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow the projector to cool for at least ...
-
Fisher PLC-SU22N - page 44
44 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section "CONNECTING THE PROJECTOR" on pages 10 ~ 13. 2. Check cable connection. Verify that all computer, video and power cord are ...
-
Fisher PLC-SU22N - page 45
45 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Sanyo Service is easily obtained. If after following all operating instructions, you find that service is necessary, contact the SFS Corporation in Los Angeles, or the store where you purchased the unit. Give the model number and explain t ...
-
Fisher PLC-SU22N - page 46
46 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 8.82 lbs (4.0 kg) 9.41" x 3.54" x 12.72"(239mm x 90mm x 323mm) (not including Adjustable Feet) 800 x 600 dots 1,440,000 (800 x 600 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz Adjustable fr ...
-
Fisher PLC-SU22N - page 47
47 OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : POA-MCSRL ● Control Cable for ADB Port Type No. : POA-MCMAC ● MAC Adapter Type No. : POA-MACAP ...
-
Fisher PLC-SU22N - page 48
1YEAR In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and addresses of authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below. Subjec ...
¿Tienes una pregunta acerca de Fisher PLC-SU22N?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fisher PLC-SU22N, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fisher PLC-SU22N probablemente compartirá una forma de solucionarlo.