-
Ryobi P430 - page 1
OPERA TOR’S MANUAL 6 in., 18 VOL T BUFFER/POLISHER P430 SA VE THIS MANUAL FOR FUTURE REFERENCE Y our buf fer/polisher has been engineered and manufactur ed to our high standard for dependability , ease of operation, and operator safety . When properly c ar ed for , it will give you years of rugged, trouble-fr ee performance. WARNING: T o r educe ...
-
Ryobi P430 - page 2
2 Introduction ..................................................................................................................................................................... 2 � W arranty ................................................................................................................................................. ...
-
Ryobi P430 - page 3
3 GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . The term “power tool” in all of the war n - ings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SA VE THESE INSTRUCTIONS WORK ...
-
Ryobi P430 - page 4
4 GENERAL SAFETY RULES SPECIFIC SAFETY RULES Use the power tool, accessories and tool bits etc., in acco rdan ce with these instruc tions and in the mann er intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations dif - ferent from those intende ...
-
Ryobi P430 - page 5
5 An extension cord should not be used unless absolutely necessary . Use of improper extension cord could result in a risk of fir e and electr ic shock. If extension cord must be used, make sur e: a. Th at p ins on plu g of ext ensi on c ord are the sam e number , size and shape as those of plug on charger . b. Tha t ext ension cord is properl ...
-
Ryobi P430 - page 6
6 SYMBOLS Some of the following symbols may be used on this tool. Please study them and lear n their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer . V V olts V oltage A Amperes Current Hz Hertz Frequency (cycles per second) W W att Power min Minutes Time Alternating Current T ype of current Dire ...
-
Ryobi P430 - page 7
7 SYMBOLS The following signal words and meanings ar e intended to explain the levels of risk associated with this product. DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury . WARNING: Indicates a potentially hazar dous situation, which, if not avoided, could result in death or seriou ...
-
Ryobi P430 - page 8
8 FEA TURES Fig. 1 PRODUCT SPECIFICA TIONS Buffing Pad Size ........................................................... 6 in. Orbit Diameter ........................................................... 3/8 in. Motor .................................................................. 18 V olt DC No Load Speed ..................................... 4,00 ...
-
Ryobi P430 - page 9
9 ASSEMBL Y UNP ACKING This product has been shipped completely assembled. Carefully remove the tool and any accessories from the box. Make sur e that all items listed in the packing list ar e included. Inspect the tool carefully to make sure no breakage or damage occurred during shipping. Do not discar d the packing material until you ...
-
Ryobi P430 - page 10
10 OPERA TION CHARGING A COOL BA TTERY P ACK If battery pack is within normal temperature range, the red LED on char ger will come on. NOTE: If the char ger does not charge the battery pack under normal circumstances, r etur n both the battery pack and char ger to your nearest Authorized Service Center for electrical check. Charge the battery p ...
-
Ryobi P430 - page 11
11 OPERA TION CAUTION: When placing battery pack in the tool, be sure raised rib on battery pack aligns with the slot in the buffer/pol- isher and latches into place properly . Improper installa- tion of the battery pack can cause damage to internal components. TO REMOVE BA TTERY P ACK See Figure 4. Place the power switch in the OFF ( O ) posit ...
-
Ryobi P430 - page 12
12 OPERA TION Fig. 8 APPLICA TION OF LIQUID POLISH See Figure 7. Apply a small circle of liquid (about the size of a half- dollar) around the center of the bonnet, followed by two more rings, each slightly lar ger than the previous one. After the first application, the bonnet will not absorb as much polish. Apply two rings of polish to the bonnet f ...
-
Ryobi P430 - page 13
13 WARNING: T o pr event loss of control and possible serious personal injury , always operate the tool with both hands, keeping one hand on the handle. CHANGE TO BUFFING/POLISHING BONNET See Figure 9. Remove the battery pack from the buffer/polisher and re- move the application bonnet by loosening the drawstring and slipping the bonnet off the pad ...
-
Ryobi P430 - page 14
14 MAINTENANCE WARNING: When servicing, use only identical r eplacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty , also wear a dust mask. WARNING: T o avoid serious persona ...
-
Ryobi P430 - page 15
15 NOTES ...
-
Ryobi P430 - page 16
16 ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www .ryobitools.com OPERA TOR’S MANUAL 6 in . 18 VOL T BUFFER/POLISHER P430 983000-967 05-11-06 (REV :00) • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized ...
¿Tienes una pregunta acerca de Ryobi P430?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Ryobi P430, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Ryobi P430 probablemente compartirá una forma de solucionarlo.