-
ATEN Technology VM404H - page 1
VM0404H USER MANUAL HDMI Matrix Switch ...
-
ATEN Technology VM404H - page 2
FCC Informa tion Federal Communication C ommission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Pa rt 15 of the FCC rules. These limits are designed to provide reasonabl e protection against har mful interference in a residential installatio n. Any changes or mo ...
-
ATEN Technology VM404H - page 3
- 3 - VM0404H User Manu al Online Registr a tion Telephone Suppor t Technic al Suppor t For international online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten .com For North American technical support: International http://eservice.aten.com International 886-2 -8692-6959 China 86- ...
-
ATEN Technology VM404H - page 4
- 4 - Pa c k a g e C o n t e n t s The VM0404H 4x4 HDMI Matrix Switch package contains the following items: 1 VM0404H 4x4 HDMI Matrix Switch 1 IR Remote Control Unit 1 Power Adapter 1 Rack Mount Kit 1 User Instruc tions* Check to make sure that all the components are present and that nothing got damaged in shipping. If you encou ...
-
ATEN Technology VM404H - page 5
- 5 - Over view With more and more HDMI devices entering the market, the need for simultaneous access to different HDM I sources is becoming increasingly important. Now , the VM0404H 4x4 HDMI Ma trix Switch offers an easy and affordable way to add extra HDMI capa bilities to your installation by allowing you to sw itch easily bet ween four HDMI sou ...
-
ATEN Technology VM404H - page 6
- 6 - Fe at u r e s Connects any of 4 HDMI sources to any of 4 HDMI displays Switch between HDMI sources and displays using a remote control or front panel pushbuttons Superior video quality – HDTV resolutions of 480p, 720p, 1080i, 1080p (1920x1080); VGA, SVGA, SXGA, UXGA (1600x1200), and WUXGA (1920 x 1200) Features EDID expert t ...
-
ATEN Technology VM404H - page 7
- 7 - System Requirements Source Devices HDMI T ype A output connector(s) Note: A DVI/HDMI adapter is required when connecting a DVI so urce device. Displa y Devices Display devices or receivers with an HDMI T ype A input connector Cables 1 HDMI cable for each source device you wi ll be connecting 1 HDMI cable for each displa y devi ...
-
ATEN Technology VM404H - page 8
- 8 - Components VM0404H F ront V iew VM0404H Rear V iew No. Component Function 1 Output Port Selection Pushbuttons Pressing a port selection pushbu tton cycles through the four HDMI input sources (Source A, B, C, or D) to be displayed on the display device att ached to the corresponding output port (Display 1, 2, 3, or 4). 2 Input Port LEDs The LE ...
-
ATEN Technology VM404H - page 9
- 9 - IR R emote Control No. Component Function 1 Input Port Selection Buttons Press the Port Up button t o cycle forward through th e HDMI source devices (A to B; B to C; C to D; D to A). Press the Port Down button to cycle backwa rd through the HDMI source devices (A to D; D to C; C to B; B to A). 2 Output Port Selection Buttons Press a button to ...
-
ATEN Technology VM404H - page 10
- 10 - Inst alla tion Installation of the VM0404H is simply a matter of plugging in the appropriate cables. To install the swit ch, refer to the installation diagram below as you perform the following steps: 1. Use HDMI cables to connect the HDMI In ports on the video display devices to the HDMI Out port s on the rear panel of the VM0404H. 2. Use H ...
-
ATEN Technology VM404H - page 11
- 11 - Inst alling the RS-232 Controller In order to use the RS- 232 serial interface to attach a hig h-end controller (such as a PC) to the VM0404H, use a ser ial cable such as a modem cable. The end connecting to the VM0404H should have a 9-pin ma le connector. Connect this to the serial interface on the rear of the VM0404H. Refer to number 4 on ...
-
ATEN Technology VM404H - page 12
- 12 - RS-232 Serial Interf ace The VM0404H’s built-in bi-directional RS-232 serial interface allows system control through a high-end controller, PC, and/or home automation / home theater software package. Configuring the Serial Por t The controller’s serial port should be configured as follows: Swit ch Por t Commands The formula for Switch Po ...
-
ATEN Technology VM404H - page 13
- 13 - Note: 1. Each command string can be separated with a space. 2. The Port Number command string can be skipped, and the default value will be used. The following table shows the available command list: Output Command Description o Output command Output Port Number Description yy 01-04 port (default is 01) * All output por ts Control Descriptio ...
-
ATEN Technology VM404H - page 14
- 14 - Read Commands View information from the devic e using the following comman d: Read Command + Port + Control [Enter] The following tables show the poss ible values a nd formats for the Control command: The following table shows the available command list: Echo Commands If the Echo feature is enabled: for each action from the front panel (push ...
-
ATEN Technology VM404H - page 15
- 15 - Power On Detection Commands Enabling Power On Detection means that the VM0404H a utomatically switches to the next powered on device when one of the HDMI source devices is powered off. The formula for Power On Detection co mmands is as follows: Power On Detection + Cont rol command [Enter] For example, to turn on the Power On Detection featu ...
-
ATEN Technology VM404H - page 16
- 16 - Mute Commands Enable or disable audio coming from t he output port(s) using the following command: Mute Command + Outp ut Command + Port Number + Contro l (On / Off) [Enter] For example, to mute the audio coming from output port 1, type the following: mute o01 on [ente r] The following tables show the possible values for commands: Note: 1. E ...
-
ATEN Technology VM404H - page 17
- 17 - CEC Commands Consumer Electronics Control ( CEC) allows interconnected HDMI devices to communicate and respo nd to one remote control. The formula for CEC mode selection commands is as follows: CEC Command + Output Com mand + Port Number + Control (Off / On) [En ter] For example, to enable CEC function on output port 1, type the following: c ...
-
ATEN Technology VM404H - page 18
- 18 - P anel But ton Control Commands The formula for Panel Button commands is as follows: Panel Button Command + Co ntrol + [Ent er] For example, to enable the front pa nel pushbuttons, type the following: button on [Enter] The following tables show the possible values for commands: The following table shows LED behavior under this comman d: Comm ...
-
ATEN Technology VM404H - page 19
- 19 - EDID Mode Selection Commands Extended Display Identification Data (EDID) is a d ata format that contains a display's basic information and is used to communicat e with the video source/system. You can set which EDID mode the VM0404H uses with the following command: EDID Command + Contro l + [Enter] For example, to pass the EDID from Por ...
-
ATEN Technology VM404H - page 20
- 20 - Specifica tions Function VM0404H Display Connections 4 HDMI Input Connections 4 Connectors Device HDMI In 4 x HDMI T ype A Female (Black) Display HDMI Out 4 x HDMI T ype A Female (Black) RS-232 Port 1 x DB-9 Fem ale (Black) Power 1 x DC Jack Switches Port Selection 4 x Pushbuttons LEDs Selected 16 (Green) Video Res olution HDTV resolutions u ...
¿Tienes una pregunta acerca de ATEN Technology VM404H?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con ATEN Technology VM404H, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con ATEN Technology VM404H probablemente compartirá una forma de solucionarlo.