-
Sanyo VCB-9324 - page 1
INSTRUCTION MANUAL B/W CCD Camera VCB-9324 About this manual B efo re in st a ll in g a nd us in g th e ca m e ra, pl ea se re ad th is ma nu al carefully. Be sure to keep it handy for later reference. L73E 4/ U S G B 19 98 , 2 0, 15 ...
-
Sanyo VCB-9324 - page 2
1AC6P1P1829-- L73E4/US (1098NI) 21605 Plummer Street, Chatsworth, California 91311 Printed in Japan SANYO INDUSTRIAL VIDEO B/W VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated other ...
-
Sanyo VCB-9324 - page 3
INFORMATION TO USER Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This installation should be made by a qualified service person and should conform ...
-
Sanyo VCB-9324 - page 4
CONTENTS PRECAUTIONS........................................................................................ 3 PARTS NAMES AND FUNCTIONS ......................................................... 4 CONNECTIONS AND INSTALLATION ................................................... 6 SETTINGS AND ADJUSTMENTS ............................................. ...
-
Sanyo VCB-9324 - page 5
PRECAUTIONS In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit. For ...
-
Sanyo VCB-9324 - page 6
PARTS NAMES AND FUNCTIONS 1 Hood lens 2 Focus ring The focus does not need adjustment for subjects 1 m and more from the lens. If the subject is closer than 1 m, turn the focus ring to adjust the focus as necessary. (See page 9 .) 3 Lens 4 Lens cover This cover will protect the lens from dust and damage. 5 24 V AC input terminal (24 V AC, GND) With ...
-
Sanyo VCB-9324 - page 7
PARTS NAMES AND FUNCTIONS 6 Camera mounting screw hole (1/4"–20 UNC) When mounting the camera to the mounting bracket, use this installation hole. 7 Lens cover fixing screw 8 GND (ground) terminal screw Loosen the GND terminal screw, insert the coaxial cable into the clamp and tighten the GND terminal screw. 9 VIDEO OUT terminal screw Align ...
-
Sanyo VCB-9324 - page 8
CONNECTIONS AND INSTALLATION Connecting the coaxial cable horizontally 1 Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated. 2 Attach the coaxial cable to the base. Loosen the VIDEO OUT terminal screw ( A ) and the GND terminal screw ( B ), then insert the center wire of the coaxial cable in the VIDEO OUT terminal ...
-
Sanyo VCB-9324 - page 9
CONNECTIONS AND INSTALLATION Installing the BNC plug (sold separately) To connect the camera to peripheral devices, use a coaxial cable with BNC plug. 1 Cut the extremity of the coaxial cable (sold separately), as illustrated. • Cable type RG-6U (5C-2V), 500 m maximum. If the type of peripheral devices connected, the type of cable used and/or the ...
-
Sanyo VCB-9324 - page 10
CONNECTIONS AND INSTALLATION Basic connections for monitoring or recording The peripheral devices (VCR, monitor, etc.) and cables are sold separately. 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Plug the AC adaptor to a wall outlet. Adjust the picture on the monitor using the Brightness and Contrast co ...
-
Sanyo VCB-9324 - page 11
SETTINGS AND ADJUSTMENTS Adjusting the focus 1 Loosen the lens cover fixing screw (A). 2 Turn the cover counterclockwise to align the tab (C) on the lens cover with the tab (B) on the base and remove the cover. 3 Remove the hood lens (D), then while watching the image on the monitor turn the focus ring (E) to adjust the focus. 4 When finished, inst ...
-
Sanyo VCB-9324 - page 12
SPECIFICATIONS TV system EIA standard (525 TV lines, 30 frames/sec.) Scanning system 525 TV lines, 60 field/sec., 2:1 interlace Image device Interline transfer method, 1/3 inch solid state CCD Picture elements 537 (H) × 505 (V) Effective picture elements 510 (H) × 492 (V) Synchronization system Line lock Resolution 400 TV lines horizontally, 350 ...
¿Tienes una pregunta acerca de Sanyo VCB-9324?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Sanyo VCB-9324, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Sanyo VCB-9324 probablemente compartirá una forma de solucionarlo.