-
Napoleon Fireplaces EF30 - page 1
1 W415-0675 / A / 03.28.08 W415-0675 / A / 03.28.08 $10.00 ...
-
Napoleon Fireplaces EF30 - page 2
W415-0675 / A / 03.28.08 2 • Do not burn wood or other materials in this fireplace. • Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. Supervise young children when they are in the same room as the fireplace. • Clothing or other flammable mat ...
-
Napoleon Fireplaces EF30 - page 3
3 W415-0675 / A / 03.28.08 Electrical components and wearable parts such as fan/heater, motors, switches, nylon bearing components and remote controls are covered and NAPOLEON® will provide replacement parts free of charge during the first year of limited warranty. Light bulbs and fuses are NOT covered by the warranty. Any labour related to warran ...
-
Napoleon Fireplaces EF30 - page 4
W415-0675 / A / 03.28.08 4 When using electric appliances, basic precautions should always be followed to reduce the risk of fi re, electric shock, and injury to persons, including the following: 1. Read all instructions before using this fi replace. 2. This fi replace is hot when in use. T o avoid burns, do not let bare skin touch hot surfaces. ...
-
Napoleon Fireplaces EF30 - page 5
5 W415-0675 / A / 03.28.08 This fi replace has been tested in accordance with the CSA Standards for fi xed and location-dedicated electric room fi re- places in the United States and Canada. If you need assistance during installation, please contact your local dealer . Model Number EF30 Description Electric Fireplace V oltage 120V AC W atts MAX ...
-
Napoleon Fireplaces EF30 - page 6
W415-0675 / A / 03.28.08 6 LOCA TING FIREPLACE ! W ARNING Due to high temperatures, this electric fi replace should be located out of traffi c. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m) from the front of the fi replace. Never locate this electric fi replace where it may f ...
-
Napoleon Fireplaces EF30 - page 7
7 W415-0675 / A / 03.28.08 ! W ARNING RISK OF FIRE! The power cord must not be pinched against a sharp edge. Secure cord to avoid tripping or snag- ging to reduce the risk of fi re, electric shock or personal injury . Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffi c areas and ...
-
Napoleon Fireplaces EF30 - page 8
W415-0675 / A / 03.28.08 8 THERMOST A T AND THERMAL SENSOR INST ALLA TION This fi replace has two options for heat control. First is a thermal controlled sensor , which comes plugged into the fi replace beside the main power cord. Figure 4 . This sensor has no user temperature set points, it will turn off the heater when the sensor reaches its pr ...
-
Napoleon Fireplaces EF30 - page 9
9 W415-0675 / A / 03.28.08 HARDWIRE INST ALLA TION HARD WIRING CONNECTION If it is necessary to hard wire this fi replace, a qualifi ed electrician may remove the cord connection, and wire the unit directly to the house hold wiring. This fi replace must be electrically connected and grounded in ac- cordance with local codes, if hard wired. In th ...
-
Napoleon Fireplaces EF30 - page 10
W415-0675 / A / 03.28.08 10 NOTE: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the fi replace body , it is recommended that the walls of the fi replace enclosure be “fi nished” (ie: drywall/sheetrock), as you would fi nish any other outside wall of a home. This will ensure that clearance t ...
-
Napoleon Fireplaces EF30 - page 11
11 W415-0675 / A / 03.28.08 OPERA TING BY REMOTE CONTROL 1. Plug in your electric fi replace. 2. Make sure the unit's main Power ON/OFF button is at the ON position! The remote control will NOT work if the main Power button is at the OFF position. 3. When operating the remote control, it must be directed towards the front of the unit. 4. The ...
-
Napoleon Fireplaces EF30 - page 12
W415-0675 / A / 03.28.08 12 ! W ARNING PREP ARA TION FOR MAINTENANCE Always disconnect the power and allow the electric fi replace to cool before performing any cleaning, maintenance or relocation of this electric fi replace. T urn controls to OFF and remove plug from outlet or turn off the house circuit breaker to electric fi replace receptacle ...
-
Napoleon Fireplaces EF30 - page 13
13 W415-0675 / A / 03.28.08 EMBER BED BULB REPLACEMENT 1. Remove the 7 screws from the bottom half of the back of fi replace shown in Figure 16 . Remove back plate. 2. Locate the ember bed bulbs which are underneath the fl ame generation cylinder drum. ( Figure 16 ) 3. Remove spring clip. Hold socket and pull out old bulb. ( Figure 16 ) 4. Hold s ...
-
Napoleon Fireplaces EF30 - page 14
W415-0675 / A / 03.28.08 14 # P ART NO. DESCRIPTION 1 DQ017-002 LIGHT BULBS 2 RC3 DQ002-006 CIRCUIT BOARDS 3 Q/T FRT01-000-00B HE A TER (HEA TER WITH BLOWER) 4 DQ006-003 SWITCHES 5 R-14 REMOTE CONTROL Contact your dealer for questions concerning prices and availability of replacement parts. No rmally all parts can be ordered through your Napoleon® ...
-
Napoleon Fireplaces EF30 - page 15
15 W415-0675 / A / 03.28.08 ! W ARNING T urn off the fi replace completely and let cool before servicing. Only a qualifi ed service person should service and repair this electric fi replace. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY Dim or no fl ame 1. Bulb(s) are burnt out 1. Inspect the bulbs inside the fl ame generation cylinder drum and repla ...
-
Napoleon Fireplaces EF30 - page 16
W415-0675 / A / 03.28.08 16 NO TES ...
¿Tienes una pregunta acerca de Napoleon Fireplaces EF30?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Napoleon Fireplaces EF30, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Napoleon Fireplaces EF30 probablemente compartirá una forma de solucionarlo.