-
Lowrance electronic X-25 - page 1
X-25 INSTALLATION AND OPERATION INSTRUCTIONS LITHO IN U.S.A. 988-0105-33 LOWRANCE ELECTRONICS, INC. 12000 E. SKELLY DR., TULSA, OK 74128 PDF compression, OCR, web-optimization with CVISION's PdfCompressor ...
-
Lowrance electronic X-25 - page 2
N OTES PDF compression, OCR, web-optimization with CVISION's PdfCompressor ...
-
Lowrance electronic X-25 - page 3
N 0 T ES TABLE OF CONTENTS INTRODUCTION 1 INSTALLATION 1 POWER CONNECTIONS 2 SPEED/TERMPERATURE SENSOR 3 KEYBOARD BASICS 4 DISPLAY 5 MENUS 5 OPERATION 6 AUTOMATIC 6 RANGE 6 ZOOM - Automatic Operation 7 ZOOM- Manual Operation 8 SENSITIVITY 9 GRAYLINE® 9 FISH ID 10 CHARTSPEED 11 DISPLAY MODE 12 ALARMS 14 FISHALARM 14 DEPTH ALARMS 14 LAMP 15 FEET/MET ...
-
Lowrance electronic X-25 - page 4
4. The boat must be moving at aslowtrolling speed to seefish arches. If the boat Is motionless, fish stay in the cone, showing on the display as straight horizontal lines. ELECTRICAL NOISE A major cause of sonar problems is electrical noise. This usually appears on the sonar's display as random patterns of dots or lines. In severe cases, it ca ...
-
Lowrance electronic X-25 - page 5
Weak bottom echo, digital readings erratic, or no fish signals (cont.): INTRODUCTION 2. Electrical noisefromthe boat's motorcan interfere with the sonar. Thiscauses the sonar to automatically increase its Discrimination or noise rejection feature. This can cause the unit to eliminate weakersignals such as fish or even structure from the displa ...
-
Lowrance electronic X-25 - page 6
a one inch hole. TherefOre, after drilling the hole, pass the transducer connector up through the hole from under the dash. Then drop the power cable down from the front side of the dash. Slide the bracket over the hole, then route the transducer and power cables out the slots in the bracket. Finally, fasten the bracket to the dash. POWER CONNECTIO ...
-
Lowrance electronic X-25 - page 7
SURVEYING A LAKE The most successful anglers on any body of water are those who fish it day after day and year after year. Eventually, they learn the hot spots that produce fish consistently. They discover through experi- ence where, and at what depth, they can expect to find the fish they want at any season. And they realize that these productive ...
-
Lowrance electronic X-25 - page 8
KEYBOARD BASICS The unit sounds a tone when you press any key. This tells you the unit has accepted a command. ON/CLEAR Use this key to turn the unit on. It also clears menu selections and the menus from the screen. OFF This key turns the unit off. MENU The X-25 has many menus of features that are accessed with this key. UP and DOWN ARROWS Use thes ...
-
Lowrance electronic X-25 - page 9
Very small fish probably will not arch at all. Medium sized fish will show a partial arch, or a shape similar to an arch if they're in deep water. Large fish will arch, but turn the sensitivity up in deeper water to see the arch. Because of water conditions, such as heavy, surface clutter, thermoclines, etc., the sensitivity sometimes cannot b ...
-
Lowrance electronic X-25 - page 10
Menus change depending on the mode the unit is in. For example, if FISH ARCHES the automatic mode is turned off, the sensitivity menu changes from "AUTO SENS" to "MAN SENS." Other messages may appear in menu boxes or new menus can appear, again depending on previous selections. OPERATION Fish arches are created when the cone of ...
-
Lowrance electronic X-25 - page 11
Both 8 degree and 20 degree transducers give accurate bottom read- ings, even though the bottom signal is much wider on the 20 degree model. This is because you are seeing more of the bottom. Remem- ber, the shallow edge of the signal shows you the true depth. The rest of the signal tells you whether you are over rocks, mud, etc. SIGNAL INTERPRETAT ...
-
Lowrance electronic X-25 - page 12
Press the up arrow key to decrease the zoom size, press the down arrow key to increase the zoom size. When the unit is switched into the zoom mode, the tellers "ZM" appear at the top of the screen. The zoom window size displays in the top right corner of the screen. To turn the zoom feature off, press the menu key until the RANGE/ZOOM men ...
-
Lowrance electronic X-25 - page 13
To chanQe from feet to meters or vice-versa, press the menu key until SENSITIVITY the FEEt/METER menu appears. Press the down arrow key to switch to metric, the up arrow to switch to feet. Displays show in feet when the unit is first turned on. The menu will clear automatically after a few seconds or press the ON/CLEAR key to clear the screen. DISP ...
-
Lowrance electronic X-25 - page 14
narrow or no gray line. A hard bottom returns a strong signal that turn the alarm Sound off until the shallow alarm is triggered again. causes a wide gray line. If you have two targets of equal size, one with gray and the other without, the target with gray is the stronger echo. This helps distin- guish fish from structure, or the larger fish from ...
-
Lowrance electronic X-25 - page 15
ALARMS FISH ALARM The Fish Alarm sounds a tone when a fish symbol appears on the screen. To use the fish alarm, press the menu key until the "FISH ALARM" menu appears on the screen. Now press the up arrow key to turn the alarm on. Repeat the above steps to turn the fish alarm off. (Note: If the Fish ID feature is off, it will be turned on ...
-
Lowrance electronic X-25 - page 16
DISPLAY MODE CHT 1 (Chart #1) This is the default mode used when the X-25 is first turned on. It has the following features: 1. Automatic On 2. Fish ID Feature On ____________ 3. Digital Depth Display On ___________________ CHT 2 (Chart #2) Same as Chart #1 plus digital surface water temperature display (Requires optional LST-T Speed/Temp Sensor.) ...
¿Tienes una pregunta acerca de Lowrance electronic X-25?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Lowrance electronic X-25, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Lowrance electronic X-25 probablemente compartirá una forma de solucionarlo.