-
Pelco EW5001 - page 1
OPERA TION/CONFIGURA TION C2684M (2/08) Endura ® EW5001 Single Radio Wireless Device ...
-
Pelco EW5001 - page 2
2 C2684M (2/08) ...
-
Pelco EW5001 - page 3
C2684M (2/08 ) 3 Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Accessing the EW5001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Pelco EW5001 - page 4
4 C2684M (2/08) W elcome The Endura ® EW5001 is a high performance, single radio wireless unit that can be configur ed as either an access poin t or a bridge. There a re various network and de vice settings that can be applied depe nding on the applicat ion. Refer to the installation manual sh ipped with your EW5001 for more in formation on app li ...
-
Pelco EW5001 - page 5
C2684M (2/08 ) 5 Figure 2. WS5000 Setup Window 5. Click the Configure butt on. The Web browser opens in a n ew window displaying a login dia log box for the device you se lected. 6. T ype admin (all lowercase) in the User ID and Pas sword bo xes (admin is the default value for these b oxes). Figure 3. EW5001 Login Dialog Box 7. Click the Lo g In bu ...
-
Pelco EW5001 - page 6
6 C2684M (2/08) USING A W EB BROWSER The following are the minimum system requirements for the EW5001: • PC (Pentium ® 4 microprocessor , 1.6 GHz) with Wind ows ® 98, Windows 2000, or Wind ows XP (or higher), or Mac ® O S X 10.3.9 (or higher) • RAM: 512 Mbyte • Etherne t Card: 100 Mbit • Microsoft Internet Ex plorer 6.0 ( or higher) or F ...
-
Pelco EW5001 - page 7
C2684M (2/08 ) 7 Navigation T ools The navigation tools locat e d at the top right of the window and the bott om of the window are always accessible, regardless of w hich tab is open at a parti cular time. Figure 4. Navigation T ools Navigation Bar • Change T imeout: Use this button to change th e fail-safe timeout setting. • Change Password: U ...
-
Pelco EW5001 - page 8
8 C2684M (2/08) CHANGING THE T IMEOUT SETTING The EW5001 has a built-in , fail-safe t imeout setti ng. The defaul t timeout set ting is 10 min utes. When you make changes to other settings on the device and cl ick the T est Settin gs button, a c onfirmation message and a timer ap pear on the p age. This time r reflects t he curre nt timeout setti n ...
-
Pelco EW5001 - page 9
C2684M (2/08 ) 9 SAVING THE SETTINGS 1. After testing the chan ged settings, the Save Settings button ap pears in place of the T est Settings button. 2. If the settings are correct , click the Save Settings butt on to apply changes. 3. If the changes are not correct, click the Cancel button to revert to the last sav ed settings. RESTORING DEFAULTS ...
-
Pelco EW5001 - page 10
10 C2684M (2/08) Network Settings T ab Use the Networ k Settings tab to manage net work settings su ch as changing the unit mode a nd host name, tu rning on/off the Dynami c Host Configurat ion Protocol (DHCP), or setting a static IP address. Figure 5. Network Settings T ab CHANGING THE UNIT MODE The unit mod e you select sh ould be based o n the c ...
-
Pelco EW5001 - page 11
C2684M (2/08 ) 11 CHANGING THE HOST NAME The defaul t name for the device is EW50 00. T o c hange the hos t name, do the following: 1. Click the Host Name box and highlight th e text. 2. T ype a user- friendly name into the Host Name box (maximum 16 characte rs). A user -friendly name makes it easier to recognize t he device on the network. CHANGIN ...
-
Pelco EW5001 - page 12
12 C2684M (2/08) Access Point or Wireless Bridge T ab Depending o n the selected u nit mode, the label on the second tab will either read Ac cess Point or Wireless Bridge. Use the Access Point tab or th e Wireless Bridge tab to change the serv ice set identifier (SS ID) , manage encryption sett ings, an d modify the channel. In a ddition, the bridg ...
-
Pelco EW5001 - page 13
C2684M (2/08 ) 13 CHANGING THE ENCRYPTION PASSPHRASE The encrypti on passphrase a llows devices to securely communicat e over the networ k by enab ling encryption. T o safeguard the netw ork against Pelco devices that are part of another network, change th e passphrase. T o sp ecify a new encry ption passph rase, select Custo m and type you r perso ...
-
Pelco EW5001 - page 14
14 C2684M (2/08) CHANGING THE CHANNEL If your networ k is experien cing excessive interference, the channel should be chang e d. When changing the channel, remember that all wireless devices on the network must be set to the same channel. T o ch ange the channe l, do the fo llowing: 1. Open the Channe l drop-down bo x by clicking the down arrow . 2 ...
-
Pelco EW5001 - page 15
C2684M (2/08 ) 15 WIRELESS BRIDGE If the device is set to act as a bridge or backhaul , this inform ation will appea r on the secon d tab. The Wi reless Bridge tab ha s all of t he same settings that are available on the Access Point tab, as we ll as the brid ge connection sett ings and connection speed. Figure 7. Wireless Bridge T ab CHANGING THE ...
-
Pelco EW5001 - page 16
16 C2684M (2/08) CHANGING THE BRIDGE CONNECTION SETTINGS This setting manages how the bridge or backhaul co mponent will connect to th e appropriate device. The available settings allow the bridge or backhaul to co nnect to anot her device aut omatically or manually by ent ering a valid me dia access cont rol (MAC) addres s. 1. Select the Auto or M ...
-
Pelco EW5001 - page 17
C2684M (2/08 ) 17 Device Log T ab This information is a 24-hour record of ac tivity on the EW5001 . If your system is experiencing proble ms, you may need to refere nce this information to help determine the cause. ...
-
Pelco EW5001 - page 18
18 C2684M (2/08) T roubleshooting If the following in structions fail to solve your problem, contact Pelco P roduct Support at 1-800-289- 9100 or 1-559- 292-1981 for assistance. Access the pro perties windows for the EW 5001 single radio wir e less device on the WS500 0 Endura workstation (re f er to the WS50 00 Oper ation manual). Then note the fo ...
-
Pelco EW5001 - page 19
PRODUCT W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without c harge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on fiber optic products and TW3000 Series unsh ielded twisted pair (UTP) tra ...
-
Pelco EW5001 - page 20
W orldwid e Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.c om ISO 9001 Australia | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab Emirates ...
¿Tienes una pregunta acerca de Pelco EW5001?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pelco EW5001, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pelco EW5001 probablemente compartirá una forma de solucionarlo.