-
Simpson SWF10832 - page 1
SWF10832 8.0 Kg Fr ont Load W asher Instruction Booklet ...
-
Simpson SWF10832 - page 2
CONTENTS CUSTOMER CARE AND SERVICE 2 Contents / Customer Care And Service SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL BEFORE FIRST USE DAILY USE WASHING HINTS INTERNATIONAL WASH CODE SYMBOLS CARE AND CLEANING TROUBLESHOOTING .............................................................................................. 3 ................... ...
-
Simpson SWF10832 - page 3
Safety Information 3 SAFETY INFORMATION 1. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. This appliance is intended to be used in household and similar applications such as: Farm houses By clients in serviced apartment ...
-
Simpson SWF10832 - page 4
4 Safety Information After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely. Always be sure, that there is no water leakage from hoses ...
-
Simpson SWF10832 - page 5
Product Description 5 PRODUCT DESCRIPTION 2. 1 Worktop 2 Detergent/Softener Dispenser 3 Control Panel 4 Door Handle 5 Door 13 Child Safety Device 14 Rating Plate 15 Drain Pump 7 6 Level Adjustment Feet (Front) 8 Mains Cable 9 Water Inlet Hose 10 Water Drain Hose 11 Hose Support 12 Level Adjustment Feet (Back) Transit Bolts 14 13 Your new appliance ...
-
Simpson SWF10832 - page 6
CONTROL PANEL 3. 6 Product Description / Control Panel To remove the transit bolts. To adjust levelling legs. To connect the drain hose on the edge of a sink. Plastic hose guide Spanner - - 1 2 10 3 4 5 6 7 8 1 2 Program Selector Knob 3 4 Spin Button 5 Options Button 6 Prewash Button Rinse Plus Button 7 Night Cycle Button 8 Display and Door Lock In ...
-
Simpson SWF10832 - page 7
Control Panel 7 3.5 Rinse Plus Button 3.6 Night Cycle Button This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. Press it to add rinsing phases to a program. The indicator of this option comes on. At the end of program the display will show ‘ ’ and the ‘Door Lock’ indicator goes o ...
-
Simpson SWF10832 - page 8
8 Control Panel 3.8 Start/Pause Button 3.7 Display and Door Lock Indicator To start the selected program, press the ‘Start/Pause’. To interrupt a program which is running, press the ‘Start/Pause’ to pause the machine. To restart the program from the point at which it was interrupted, press the ‘Start/Pause’ again. If you have chosen a d ...
-
Simpson SWF10832 - page 9
Control Panel 9 3.11 Programs + Options Program; Temperature Cottons; 90 °C, 60 °C, 40 °C Cottons; 30 °C, Cold Wash Rinses Long Spin Spin Reduction, No Spin, Rinse Hold Stain, Eco, Quick Wash Prewash, Rinse +, Night Cycle, Delay Start Spin Reduction, No Spin, Rinse Hold Stain, Eco, Quick Wash Prewash, Rinse +, Night Cycle, Delay Start White and ...
-
Simpson SWF10832 - page 10
10 Control Panel/Before First Use Program; Temperature Spin To spin the laundry and to drain the water in the drum; maximum load 8 kg. Type of load; Max. weight of load Cycle description Options can be combined Drain For emptying out the last rinse water in programs with the ‘Rinse Hold’ or ‘Night Cycle’ option; maximum load 8 kg. Drain Spi ...
-
Simpson SWF10832 - page 11
Daily Use 11 DAILY USE 5. Connect the mains plug to the mains socket. Turn the water tap on. Step 1 - Setting A Program For Washing 5.1 Four Steps Start Up Guide 1 2 3 4 1. 4. 2. 3. Turn the program selector dial to the required program. Once you select a wash program, the program selected will stay at that position for the whole of the wash. - The ...
-
Simpson SWF10832 - page 12
12 Daily Use Step 2 - Loading The Laundry 1. Before loading the laundry, please make sure: Empty pockets. Tie the cords. Fasten buttons. Close zippers. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 3. Open the door by carefully pulling the door handle outwards. Check and remove objects (if there are any) t ...
-
Simpson SWF10832 - page 13
Daily Use 13 The detergent dispenser is divided into three compartments. Detergent Dispenser Drawer Step 3 - Using Detergent And Additives Compartment ‘SOFTENER’ Compartment ‘PREWASH’ This compartment is used for fabric conditioner and starching agent. This compartment is only used for detergent when a Prewash is selected. 1. - - Compartmen ...
-
Simpson SWF10832 - page 14
14 Daily Use To pause press Start/Pause. The indicator will start flashing. - Press the Start/Pause again. The program will continue. - 5.2 Interruption Of A Program 5.3 Changing A Program It is possible to change only some options after the program has started. Press the Start/Pause button. The indicator will start flashing. 1. Change the options. ...
-
Simpson SWF10832 - page 15
Daily Use 15 If the door lock indicator does not disappear, this means that the machine is already heating and the water level is above the bottom edge of the door or the drum is turning. In this case the door CAN NOT be opened. If you can not open the door but you need to open it you have to switch the machine off by turn the program selector knob ...
-
Simpson SWF10832 - page 16
16 Washing Hints WASHING HINTS 6. Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 6.1 Sorting The Laundry 6.2 Temperatures 90°C 60°C 50°C 40°C 30°C Cold For normally soiled, colourfast garments (e.g. shirts, night ...
-
Simpson SWF10832 - page 17
Washing Hints 17 Rust : oxalic acid dissolved in hot water or a rust removing product used in cold water. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains : treat with bleach, rinse well (whites and fast coloureds only). Grass : soap lightly and ...
-
Simpson SWF10832 - page 18
18 Washing Hints the wash load to turn grey, greasy clothes. sudsing, inadequate rinsing. reduced washing effect, Any fabric softener or starching additives must be poured into the compartment marked ‘ ’ before starting the wash program. Follow the product manufacturer’s recommendations on quantities to use and do not exceed the MAX mark in t ...
-
Simpson SWF10832 - page 19
International Wash Code Symbols 19 INTERNATIONAL WASH CODE SYMBOLS 7. These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Bleach in cold water DO NOT bleach Bleaching Energetic wash Delicate wash Hand wash Max. wash temperature 95 °C Hot iron max. 200 °C Dry cleaning in all solvents Dry cleaning ...
-
Simpson SWF10832 - page 20
20 Care And Cleaning CARE AND CLEANING 8. You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Clean the appliance only with soap and warm water. Fully dry all t ...
-
Simpson SWF10832 - page 21
Care And Cleaning 21 Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse program without any clothes in the drum. 8.6 Cleaning The Drawer Recess To aid cleaning, the top part of the additive compartment ...
-
Simpson SWF10832 - page 22
22 Care And Cleaning 3. Press the two levers and pull forward the drainage duct to let the water flow out. 4. When the container is full of water, put the drainage duct back again and empty the container. Do steps 3 and 4 again and again until no more water flows out from the drain pump. 5. Pull back the drainage duct and turn the filter to remove ...
-
Simpson SWF10832 - page 23
Care And Cleaning 23 If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time. Remove the water inlet hose from the water tap. Remove the inlet hose behind the appliance. Clean the filter in the valve with a stiff brush or a towel. Install aga ...
-
Simpson SWF10832 - page 24
24 Care And Cleaning If the machine is exposed to temperatures below 0°C, certain precautions should be taken. 8.9 The Dangers Of Freezing Turn off the water tap. 1. 2. Unscrew the inlet hose. 3. Put a bowl below the recess of the drain pump to collect the water that flows out. 4. Pull forward the drainage duct and that of the inlet hose in a bowl ...
-
Simpson SWF10832 - page 25
Troubleshooting 25 The door has not been closed. (Error code: ) The plug is not properly inserted in the power socket. There is no power at the socket. Insert the plug into the power socket. Please check your domestic electrical installation. The Start/Pause button has not been pressed. Press the Start/Pause button. The delay start has been selecte ...
-
Simpson SWF10832 - page 26
26 Troubleshooting Malfunction Possible cause Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. Reduce the detergent quantity or use another one. Reduce the detergent quantity or use another one. Redistribute laundry manually in the drum and start the spin phase again. Refer to relevant paragraph in “Posit ...
-
Simpson SWF10832 - page 27
Troubleshooting 27 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Malfunction Possible cause Solution The electronic unbalance detection device has cut in because the laund ...
-
Simpson SWF10832 - page 28
28 Technical Data TECHNICAL DATA 10. Dimensions Power supply (voltage/frequency) Total power absorbed Minimum fuse protection Water supply pressure Maximum load Spin speed 220-240 V/50 Hz 2200 W 10 A 0.8 MPa 0.05 MPa Maximum Minimum 1000 RPM 700 RPM Maximum Minimum Width Height Depth 59.6 cm 84.8 cm 66.5 cm Programs Max. Load 8.0 kg 3.5 kg 3.5 kg 2 ...
-
Simpson SWF10832 - page 29
Installation 29 INSTALLATION 11 . 11.1 Unpacking You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. Use gloves. Remove the external film. If necessary, use a cutter. Remove the polystyrene packaging materials. Remove the plastic bag which cover the machine. Open the door. Remove ...
-
Simpson SWF10832 - page 30
30 Installation Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. Use a spirit level on the top and side of the washing machine to check the levels. If you do not have a spirit level, as a guide use the edge of a door frame, ...
-
Simpson SWF10832 - page 31
Installation 31 Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. When the washing machine is levelled, try to rock it from corner to corner. If it does rock, adjust the legs again until it is levelled and does not rock. Connect the water inlet hose to a tap with 3/4” BSP thread. Use ...
-
Simpson SWF10832 - page 32
32 Installation Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. When the appliance is installed the power supply cable must be easily accessible. If this appliance is supplied from a cord extension set or electrical portable outlet device, the cord extension set or electrical portable d ...
-
Simpson SWF10832 - page 33
Environment Concerns 33 The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. To save water, energy and to help protect the environment, we recommend that you follow these ti ...
-
Simpson SWF10832 - page 34
NOTE ...
-
Simpson SWF10832 - page 35
...
-
Simpson SWF10832 - page 36
www .simpson.com.au 147194897-001-352013 ...
¿Tienes una pregunta acerca de Simpson SWF10832?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Simpson SWF10832, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Simpson SWF10832 probablemente compartirá una forma de solucionarlo.