-
Perle Systems S-110PP - page 1
P/N 5500318-12 Perle PoE/PoE+ 10/100 Ethern et Media Con verters Inst allation Guide S-110P S-110PP S-110P-SFP S-110PP-SFP ...
-
Perle Systems S-110PP - page 2
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the ins tallation and operatio n of the Per le Standalon e PoE/PoE + 10/100 rate converting Me dia Conv erters ( S-110P). These pr oducts have the ability to con vert 10/100 Base-T cable connect ions (copper) to 100Ba ...
-
Perle Systems S-110PP - page 3
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 3 Inst allation The default DI P switch s ettings (al l switches in the UP posit ion) will work f or mos t installations. These are the s teps req uired to conf igure the Per le S-1 10P Ethernet m edia converter : 1. Insert SFP M odule (SFP Model on ly). 2. Set the DIP s witch setti ...
-
Perle Systems S-110PP - page 4
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 4 UTP (copper) Power PoE • IEEE 802.3af (PoE) up t o 15.4 W atts for the UT P port. PoE+ • IEEE 802at- 2009 (PoE +) • Up to 30 W atts on UT P port • PoE+ models will also sup port 802 .3af PDs (T ype 1) and PoE+ PDs (T ype 2) Powe ring Options Ju mper Se ttings Note: T he fa ...
-
Perle Systems S-110PP - page 5
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 5 DIP Switches The DIP s witches for Bank 1 are acces sible throu gh the op ening in the side of th e enclosure . Bank 1 Bank 2 To acc ess the DIP switc hes f or Bank 2, unscr ew the six s ide screws on the c ase an d rem ove the cover plat e. Locate th e jum per set as detai led be ...
-
Perle Systems S-110PP - page 6
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 6 Bank 2 Note: All switch cha nges tak e effect imm ediately. Swi tch changes will cycle p ower to the PD onl y if the PD Reset s witch i s set to On or you m ake changes to the PSE Po wer switch es. DIP Switch Setti ngs Bank 1 Auto-negotiation (cop per) (Switch 1) Switch Posit ion ...
-
Perle Systems S-110PP - page 7
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 7 with the copper link partner. T he param eters used b y the media converter will be determ ined b y the Copper Spe ed (Bank 2 - switch 1) and D uplex Co pper (Bank 2 - switch 2) DIP switch settings. Paus e receive an d send wi ll be disable d. Link Pass-Through Mod e (Switch 2) Sw ...
-
Perle Systems S-110PP - page 8
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 8 4. (B) Drops li nk on copper c onnection because Li nk Pass- Through is c onfigured. 5. (A) Link on c opper conn ection is not affec ted because Link Pass-T hrough Mode is s et to Stand ard. Far End Fault (Switch 3) Switch Posit ion Fiber Port Up (defau lt) Enabled Down Disabled E ...
-
Perle Systems S-110PP - page 9
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 9 detection Down Down PSE disab led These s witches m ust be set in order t o enable t he power s ourcing function and t o indicate t he type of de vice detec tion required. If the device t ype is unknown, th e default sho uld be used as per IEEE802.3af /at standards . Enabled : W h ...
-
Perle Systems S-110PP - page 10
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 10 powered d evices will be m aintained. T his m ode will overr ide all other switch s ettings. Bank 2 Speed Copper (Switch 1) Switch Posit ion Copper po rt Up (defau lt) 100 Down 10 100: W hen Switch 1 is in the Up pos ition, the S-1 10P wil l force the speed to 100 Mbps. 10: W hen ...
-
Perle Systems S-110PP - page 11
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 11 Half Duplex: T he m edia converter will be set to H alf Duplex mode. Auto/MDIX (Switch 4) Switch Posit ion Copper po rt Up (defau lt) Auto Down MDIX Auto: In the Up switch pos ition; th e media con verter wi ll automatical ly detect th e Ethernet cabl e’s polarit y. MD IX: The ...
-
Perle Systems S-110PP - page 12
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 12 Inst alling the Simplex Fiber Ca ble • Locate a 100 BASE-X com pliant sim plex (1 str and) fibe r cable with appropr iate connector s. Ensure t hat the TX wavelengt h matc hes the RX wavele ngth at the other end an d the RX wavelength m atches the TX wave length at the other e ...
-
Perle Systems S-110PP - page 13
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 13 5. Plug the other end of the power cord into an appr opriate power out let. Powe ring up the P erle Media Con verter • Connect the Perle supp lied power adapter to th e m edia converter. • Connect the power adapt er to a po wer source. • Check that the PW R LED is lit. ...
-
Perle Systems S-110PP - page 14
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 14 Operation Status LED The Perle Po E/PoE+10/ 100 Rate c onverting Med ia co nverters have status LEDs locat ed on the front panel of the unit. PWR On – Power is applie d to the unit Blinking (slow) – Loo pback mode - fiber interface is in loopba ck mode Blinking (fast) Power O ...
-
Perle Systems S-110PP - page 15
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 15 100- (Copper Port) On – 100 Mbps (valid link and detected speed is 100 Mbps) Off – 10 Mbps (i f link is currently established) LKC- (Link Sta tus on Copper port) On – Coppe r link is present Off – No coppe r link present Blinking (fast) – Cop per link up and receiving d ...
-
Perle Systems S-110PP - page 16
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 16 Other Fea tures Auto-MDIX Auto-MDIX ( autom atic medium -dependent int erface cross over) detects the s ignalling on the 10/100 BASE-T interface t o determ ine the type of c able connec ted (straight-thr ough or c rossover) an d automatical ly configures t he conn ection. Pause ( ...
-
Perle Systems S-110PP - page 17
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 17 T roublesh ooting General • Ensure po wer is supplied t o the m edia converter. O nly the Perle provided power s upply ma y be used. • Ensure the rem ote dev ice’s f iber connection t ype is compatible with the m edia convert er. If usin g a simplex fiber connection, ensure ...
-
Perle Systems S-110PP - page 18
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 18 back and pas sed throu gh the fiber, back to the local converter a nd passed to the copper l ink. No Power to the PD • Ensure that the PD is c ompatible wit h the S-110 P. If the PD is a POE+ de vice then a POE+ m edia converter m ust be used (S-110PP) • Ensure that the power ...
-
Perle Systems S-110PP - page 19
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 19 T echnical Speci fications The f ollowing applies to a ll S-110 P media co nverters: Power Input / Consumption: 48V DC to 56V DC @ 6 W Operating Temperature: 0° C to 50° C (32° F to 122° F) Storage Temperature: -25° C to 70° C (-13° F to 158° F) Operating Humidity : 5% to ...
-
Perle Systems S-110PP - page 20
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 20 S-110 P -S2ST120 S-110 PP -S2ST120 SM TX: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: 0 35 S-110 P -S1SC20U S-110 PP -S1SC20 U SM TX: 1310 RX: 1550 Min: -14 Max: -8 Min: -32 Max: -3 1 8 S-110 P -S1SC20D S-110 PP -S1SC20 D SM TX: 1550 RX:1310 Min: -14 Max: -8 Min: -32 Max: -3 1 8 S- ...
-
Perle Systems S-110PP - page 21
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 21 Complian ce Informa tion FCC This produc t has been f ound to com ply with th e limits for a Class A digital devic e, pursuant to Part 15 of the FCC ru les. These l imits are design ed to provide re asonab le protection against harmful interference when the eq uipm ent is operate ...
-
Perle Systems S-110PP - page 22
Perle PoE/PoE + 10/100 Ethernet Media Converter Installation Guide 22 Warranty / Registration Perle’s stan dard Lifetim e Warrant y provides cus tomer s with return to factor y repairs for Perl e products th at fail un der the c onditions of the warrant y coverage. De tails ca n be found at: http://www.perle.com/supp ort_services/warranty.shtml C ...
¿Tienes una pregunta acerca de Perle Systems S-110PP?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Perle Systems S-110PP, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Perle Systems S-110PP probablemente compartirá una forma de solucionarlo.