-
Kenwood KDV-MP3346 - page 1
DVD-RECEIVER INSTRUCTION MANUAL KDV-MP3346M KDV-MP3346 © GET0637-001B [U/UU] (B64-4732-18) The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classied as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger ...
-
Kenwood KDV-MP3346 - page 2
2 ENGLISH WARNINGS (to prevent injury or fire): • Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent short circuit. • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety dev ...
-
Kenwood KDV-MP3346 - page 3
3 ENGLISH CONTENTS 4 Preparation 4 Canceling the display demonstration 4 Setting the clock 5 Prepare the remote controller (RC-DV350) 5 Other settings before operations 7 Basic operations 7 Control panel 7 Remote controller (RC-DV350) 9 Listening to the radio 11 Playable disc type 12 Listening to a disc 13 Operation using the control panel 14 Opera ...
-
Kenwood KDV-MP3346 - page 4
4 ENGLISH 4 Finish the procedure. Setting the clock 1 Turn on the power. 2 Enter Function Control settings. 3 Turn the control knob to make a selection, then press to confirm. 1 : 00 4 Adjust the hour. Preparation [Hold] The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), ...
-
Kenwood KDV-MP3346 - page 5
5 ENGLISH 5 Adjust the minute. 1 : 00 Press 4 to return to the hour adjustment. 6 Finish the procedure. While in clock display screen, press and hold SCRL DISP will enter <CLOCK ADJ> setting directly. Perform steps 4 and 5 to adjust the hour and minute. Prepare the remote controller (RC-DV350) Insert the batteries into the remote cont ...
-
Kenwood KDV-MP3346 - page 6
6 ENGLISH The following settings can only be done when the unit is on standby state. Item Selectable setting, [ Initial ] KEY BEEP • ON • OFF : Activates the keypress tone. : Deactivates the keypress tone. TDF ALARM • ON • OFF : When you turn off the ignition switch of the car, the unit beeps if the control panel is not detached. Detach the ...
-
Kenwood KDV-MP3346 - page 7
7 ENGLISH Basic operations Control panel Remote controller (RC-DV350) When using the remote controller, point the top of the remote control towards the remote sensor as directly as possible. The operations from the remote controller differ depending on the position of the mode switch. AUD (audio) mode: For controlling a selected source or t ...
-
Kenwood KDV-MP3346 - page 8
8 ENGLISH When you press or hold the following button(s)... Main unit Remote controller General operation — • Turns on. • Turns off if pressed and held. Selects the available sources (if the power is turned on). • If the source is ready, playback also starts. Adjusts the volume level. • Selects items if turn the control knob on the main u ...
-
Kenwood KDV-MP3346 - page 9
9 ENGLISH 1 Enter Function Control settings. 2 Select “TUNER CTRL.” Listening to the radio ~ ] “TUNER” Ÿ ] “F1,” “F2,” “F3,” or “AM” ! “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. You can select or set the <TUNER CTRL> settings while listening to the radio. Item Selectable ...
-
Kenwood KDV-MP3346 - page 10
10 ENGLISH Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.5 MHz into preset number “4” of the F1 band. 1 ] “F1” 2 ] “92.5” Make sure <MANU> is selected for <SEEK MODE> in <TUNER CTRL>. ( 9) • To fast-forward/fast-reverse manual search, press and ...
-
Kenwood KDV-MP3346 - page 11
11 ENGLISH Playable disc type Disc type Recording format, file type, etc Playable DVD DVD-Video * 1 Region Code: 2 (for KDV-MP3346M) or 3 (for KDV-MP3346) Ex.: DVD-Audio / DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Video: UDF bridge • DVD-VR • DivX/MPEG-1/MPEG-2/MP3/ WMA/WAV: ISO 9660 level 1, level 2, Romeo, Joliet ...
-
Kenwood KDV-MP3346 - page 12
12 ENGLISH Listening to a disc Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. ( 16 – 20) • Selects an appropriate color system (PAL/NTSC) for your monitor. ( 5, 6) The disc type is automatically de ...
-
Kenwood KDV-MP3346 - page 13
13 ENGLISH Ejects the disc * “NO DISC” appears and “IN” indicator goes off. Press SRC to listen to another playback source. Pauses or resumes playback Stops playback Selects title/program/ playlist/folder Selects chapter/ track/file Fast-forwards/ fast-reverses * If the ejected disc is not removed within 15 seconds, the disc is automaticall ...
-
Kenwood KDV-MP3346 - page 14
14 ENGLISH Changing the display information Title number & Chapter number / Program/Playlist number & Chapter number = Play time = Clock = (back to the beginning) Track number * 1 & Play time = Clock = (back to the beginning) Disc title = Track title = Track number & Play time = Clock = (back to the beginning) Title & Artist nam ...
-
Kenwood KDV-MP3346 - page 15
15 ENGLISH Reverses/fast-forwards “ × 2, × 5, × 10, × 20, × 60” “1, 2, 3” During pause: Reverse slow motion * 1 /forward slow motion “1/32, 1/16, 1/8, 1/4, 1/2” * 1 Not possible for DVD-VR or Video CD. During pause: Forward frame-by-frame playback Skip back or forward the scenes by about five minutes * 2 * 2 The operation is enable ...
-
Kenwood KDV-MP3346 - page 16
16 ENGLISH Using the Disc Menu 1 Disc menu is displayed. 2 ] Select an item. • To return to the previous menu, press MENU . • To return to the first menu feature, press TOP MENU . 1 ] To show Program list menu. or ] To show Playlist menu. 2 ] Select an item. • To remove the Program list/Playlist menu, press MENU or TOP MENU again. Direct Sear ...
-
Kenwood KDV-MP3346 - page 17
17 ENGLISH D Playback information Current title/chapter Current program/chapter Current playlist/chapter Current track Current folder/track Current folder/file E Time indication Elapsed playing time of the disc (For DVD-Video/DVD-VR: Elapsed playing time of the current title/program/playlist.) DVD-Video/DVD-VR: Remaining title/program/playlist time ...
-
Kenwood KDV-MP3346 - page 18
18 ENGLISH Control screen operations A Current folder number/total folder number B Folder list with the current folder selected • An image is displayed when an album art is attached to the tag of a playing audio file. C Selected playback mode D Elapsed playing time of the current track E Operation mode icon ( 3 , 7 , 8 , ¡ , 1 ) F Current track ...
-
Kenwood KDV-MP3346 - page 19
19 ENGLISH 3 ] Selects a folder or track. 4 ] Starts playback. Playback starts automatically. To select a playback mode While the control screen is displayed.... 1 Press OSD to show the playback mode selection screen. 2 Press 2 / 3 to select a playback mode (“REPEAT” / “RANDOM”). 3 Press 5 / ∞ to select an item. “REPEAT” : “TRACK” ...
-
Kenwood KDV-MP3346 - page 20
20 ENGLISH Menu Item Setting LANGUAGE MENU LANGUAGE Select the initial disc menu language. ( 27) AUDIO LANGUAGE Select the initial audio language. ( 27) SUBTITLE Select the initial subtitle language or remove the subtitle (OFF). ( 27) ON SCREEN LANGUAGE Select the language for the on screen display. PICTURE MONITOR TYPE Select the monitor type to w ...
-
Kenwood KDV-MP3346 - page 21
21 ENGLISH • When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming. • When you select “16:9” for a picture whose aspect ratio is 4:3, th ...
-
Kenwood KDV-MP3346 - page 22
22 ENGLISH Other adjustments 1 Enter Function Control settings. 2 Select “AUD CTRL,” “DISP CTRL,” or “AUD SETUP.” The following settings can be made while: AUD CTRL : Listening to any source except in STANDBY state or when listening to a phone call. DISP CTRL : Listening to any source. AUD SETUP : Listening to any source except in STAND ...
-
Kenwood KDV-MP3346 - page 23
23 ENGLISH Item Selectable setting, [ Initial ] AUD CTRL (audio control) BASS LEVEL * 2 –8 — +8, [0] : Adjusts the bass level of the selected sound mode. MID LEVEL * 2 –8 — +8, [0] : Adjusts the middle level of the selected sound mode. TRE LEVEL * 2 –8 — +8, [0] : Adjusts the treble level of the selected sound mode. BALANCE L15 — R15, ...
-
Kenwood KDV-MP3346 - page 24
24 ENGLISH Symptom Remedy/Cause General Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. “PROTECT” appears on the display and no operations can be done. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. ( 2) ...
-
Kenwood KDV-MP3346 - page 25
25 ENGLISH Symptom Remedy/Cause Disc in general “NO DISC” appears on the display. Insert a playable disc into the loading slot. “PLEASE” and “EJECT“ appear alternately on the display. The disc is quite dirty, inserted upside down, severely scratched, or unreadable. Press 0 , then insert a disc correctly. “REGION ERR” appears on the ...
-
Kenwood KDV-MP3346 - page 26
26 ENGLISH Maintenance How to clean the unit If the control panel is stained, wipe it with a dry soft cloth such as a silicon cloth. If it is badly stained, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. • Applying spray cleaner directly to the unit may affect its mechanical parts. ...
-
Kenwood KDV-MP3346 - page 27
27 ENGLISH Language codes Code Language Code Language Code Language Code Language ENGLISH English ET Estonian LN Lingala SM Samoan SPANISH Spanish EU Basque LO Laothian SN Shona FRENCH French FA Persian LT Lithuanian SO Somali GERMAN German FI Finnish LV Latvian, Lettish SQ Albanian ITALIAN Italian FJ Fiji MG Malagasy SR Serbian DUTCH Dutch FO Faro ...
-
Kenwood KDV-MP3346 - page 28
28 ENGLISH Specifications AUDIO/VIDEO SECTION Maximum Power Output: Front/Rear: 50 W per channel Full Bandwidth Power (at less than 1% THD): 22 W per channel Speaker Impedance: 4 Ω to 8 Ω Tone Action: Frequency: Bass: 100 Hz Middle: 1 kHz Treble: 10 kHz Level: ±8 dB Frequency Response: 40 Hz to 20 000 Hz Line-Out Level/Impedance: 2.5 V/20 kΩ lo ...
-
Kenwood KDV-MP3346 - page 29
29 ENGLISH DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range: 90 dB Signal-to-Noise Ratio (1 kHz): 90 dB Wow and Flutter: Less than measurable limit Div ...
¿Tienes una pregunta acerca de Kenwood KDV-MP3346?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Kenwood KDV-MP3346, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Kenwood KDV-MP3346 probablemente compartirá una forma de solucionarlo.