-
La Crosse Technology WT-5721 - page 1
WT-5721 433 MHz Radio Controlled Projection Alarm Instruction Manual P R OJE CT I ON 0 2' ( ...
-
La Crosse Technology WT-5721 - page 2
2 TABL E OF CONTENT S Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Programming Sequence 6 Function Buttons 6 Time Zone Setting 6 DST (Daylight Saving Time) Setting 7 Adjustable Snooze 7 Time Setting 7 Date Setting 7 12/24-Hour Setting 8 Features ...
-
La Crosse Technology WT-5721 - page 3
3 INVENTORY OF CONTENTS 1) WT-5721 Alarm Clock 2) TX6U Remote temperature sensor 3) AC adapter/transformer 4) Instruction manual and warranty card. ADDITION AL EQUIPMENT (not included) 1) Two fresh 1.5V AA batteries (optional for alarm clock) 2) Two fresh 1.5V AA batteries (for remote sensor) FEATURES OF PROJECTION ALARM Operation of these fea ture ...
-
La Crosse Technology WT-5721 - page 4
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteri es and avoid rec hargeable batteries. 1. Have the indoor station and outdoor remote 3 to 5 ap art. 2. Batteries shoul d be out of both units for 1 0 m inutes. 3. Place the batteries into the outdoor remote first then into the indoor station. (All outdoor remotes must be started before the ...
-
La Crosse Technology WT-5721 - page 5
5 B attery Cover DETAILED SET-UP GUIDE II. BATTERY INSTALLATIO N A. REMOTE TEMPERATURE SENSOR 1. Remove the battery cover. Observing the correct polarity, install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation). 2. Replace the battery cover. B. PROJECTION ALARM 1 ...
-
La Crosse Technology WT-5721 - page 6
6 III. PROG RAM MODE To enter the Program Mode hold down the “SET ” button for 1 second, until the time zone (“-5” default) flashes in the lower left. The Program Mode Guide is laid out in a manner t hat allows you to program each function separ ately, or you can follow the instructions entirely to program the projection alarm. Complete pro ...
-
La Crosse Technology WT-5721 - page 7
7 D. DST (DAYLIGHT S AVING TIME) SETTING Note: The DST default is “On ”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recogni ze DST changes (Arizona and parts of Indiana) turn th e DST “OFF”. 1. Hold down the “ SET” button for 1 second (the sele ...
-
La Crosse Technology WT-5721 - page 8
8 9. Press and release the “ SET” button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. H. 12/24-HOUR SETTIN G Note: Setting to the 24 hour mode (also known as Military Time) will also change the temperature to display in ° C instead of ° F. 1. Hold down the “ SET” button for 1 second (the se ...
-
La Crosse Technology WT-5721 - page 9
9 IV. FEATURES & OPERATIONS A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 8. Adjustable snooze B. RA DIO-CONTROLL ED TIME AND DA TE 1. The projection alarm will autom ...
-
La Crosse Technology WT-5721 - page 10
10 6. The projector case can be rotated 180 ° to furthe r help orient the projected display. 7. The intensity of the projection can be adjusted to three different settings as well as turned “off” by pressing the light Intensity button. When turned off, the projection will only come on when a button is pressed. The intensity cannot be set for t ...
-
La Crosse Technology WT-5721 - page 11
11 G. TIME ALARM The projection alarm has two se parate alarms for time, “ALM1 ” and “ALM2”. The alarms have a different sound; ALM1 increases in volume after 25 seconds, and again after 50 seconds. ALM2 is a constant volume. The total duration is 96 seconds for each alarm. 1. SETTING THE ALARM a. Press and hold “ALM1” OR “ALM2” for ...
-
La Crosse Technology WT-5721 - page 12
12 V. MOUNTING THE REMOTE TEM PERATURE SENSOR A. The Remote Temperature Sensor can be mounte d in two ways: 1) with the use of screws, or 2) using the adhesive tape. B. MOUNTING WITH SCREWS 1. Remove the mounting bracket from the Remote Temperatu re Sensor. The bracket should snap off easily. 2. Place the mounting bracket over the desir ed location ...
-
La Crosse Technology WT-5721 - page 13
13 TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batteries (if AC is not used) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor temp erature LCD. Solution: 1) Move unit to an area with warm er or cool ...
-
La Crosse Technology WT-5721 - page 14
14 SPECIFICATIONS FOR WT-5721 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.2 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C resolution) Checking intervals: Every 10 second s indoor, 3 times in 10 minutes for remote temperature. Power source: AC Adapter (included) Input ...
-
La Crosse Technology WT-5721 - page 15
15 W AR R AN T Y I N F O R M AT I ON La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this produc t ...
-
La Crosse Technology WT-5721 - page 16
16 For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.lacrossetechnology.com FCC ID: OMO-01RX (recei ver) OMO-01TX ...
¿Tienes una pregunta acerca de La Crosse Technology WT-5721?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con La Crosse Technology WT-5721, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con La Crosse Technology WT-5721 probablemente compartirá una forma de solucionarlo.