-
Pelco PT55OP - page 1
Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ® PT550P Series Medium Duty Pan/Tilt Installation/ Operation Manual C325M-C (6/99) ...
-
Pelco PT55OP - page 2
2 Pelco Manual C325M-C (6/99) REVISION HISTOR Y Manual # Date Comments C325M-C 10/98 Changed manual to new f ormat. Added ratings. Re vised installation instructions. Mov ed exploded assemb ly dia- gr am, par ts lists, and potentiometer adjustment to main- tenance/ser vice manual. Rev ersed wire colors f or pins 5 and 8 in wiring schematics. 6/99 R ...
-
Pelco PT55OP - page 3
Pelco Manual C325M-C (6/99) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be obser v ed. 1. Installation and servicing should only be done by qualified ...
-
Pelco PT55OP - page 4
4 Pelco Manual C325M-C (6/99) 2.0 DESCRIPTION Pan/tilts in the PT550P Series are designed to remotely position a TV camer a in both the horizontal and vertical attitudes. Pan (horizontal) and tilt (v er tical) mov e- ments are caused by activ ating small DC motors in the pan/tilt unit. All Pelco units are equipped with adjustable limits f or both p ...
-
Pelco PT55OP - page 5
Pelco Manual C325M-C (6/99) 5 CAUTION: Pan/tilts in the PT550P Series are designed f or upr ight or in- ve r ted operation and should ne ver be mounted horizontally . NOTE: When mounting the pan/ tilt outdoors in the inv er ted position (base up), RTV silicone sealant, such as Dow Corning T ype 732 or equivalent, should be applied to the areas indi ...
-
Pelco PT55OP - page 6
6 Pelco Manual C325M-C (6/99) Ta b le A . Maxim um Cable Distances Wire Size Maximum Distance 20 A WG 635 f eet (193.55 m) 18 A WG 1,015 feet (309.37 m) 16 A WG 1,610 feet (490.73 m) Distances are calculated with both motors (pan/tilt) running and assuming a 10% v oltage drop in cab le. ...
-
Pelco PT55OP - page 7
Pelco Manual C325M-C (6/99) 7 Figure 2. Connector Assembly 3.3.1 Mating Connector Assembly To assemble the mating connectors, ref er to Figure 2 and perf orm the following steps. The instructions that follow apply to all AMP style connectors regardless of pin siz e or pin number . 1. Slide the connector clamp assemb ly ov er the conductor cab le. I ...
-
Pelco PT55OP - page 8
8 Pelco Manual C325M-C (6/99) Figure 3. PT550P Wir ing Diagr am (including HB Option) ...
-
Pelco PT55OP - page 9
Pelco Manual C325M-C (6/99) 9 Figure 4. PT550P/PP Wiring Diagram (including HB Option) ...
-
Pelco PT55OP - page 10
10 Pelco Manual C325M-C (6/99) Figure 5. Limit Stops 3.4 LIMIT STOP ADJUSTMENTS To set pan/tilt limit stops, perform the follo wing steps. Refer to Figure 5. 1. Loosen the pan limit stops. 2. T ur n the control unit on. P an the unit to the right until the desired right pan limit is reached. 3. Mo ve the right pan limit stop until it touches the pa ...
-
Pelco PT55OP - page 11
Pelco Manual C325M-C (6/99) 11 4.0 OPERA TION Ref er to the manual for y our control equipment for operating the pan/tilt. ...
-
Pelco PT55OP - page 12
12 Pelco Manual C325M-C (6/99) 5.0 TROUBLESHOOTING Some common problems encountered with pan/tilt systems include mis wir ing, ov er- loading, and not using the units for the correct application. If the pan/tilt unit fails to operate, do the f ollowing: 1. Chec k the fuse in the control unit. If the fuse is bad, replace it. 2. If the fuse b lows af ...
-
Pelco PT55OP - page 13
Pelco Manual C325M-C (6/99) 13 Figure 6. Servicing the P an/Tilt 6.0 MAINTENANCE Inspect the pan/tilt unit ev er y six months to ensure trouble-free operation and an e xtended product lif e. Harsh environments and/or continuous motion applications may require more frequent maintenance . Please read all of the instructions that follow bef ore ser vi ...
-
Pelco PT55OP - page 14
14 Pelco Manual C325M-C (6/99) 7.0 SPECIFICA TIONS MECHANICAL Pan: 0-355 ° movement in horizontal plane Speed 6 ° /sec ± 1 ° (No load condition) Tilt: ± 90 ° movement in vertical plane Speed 3 ° /sec ± .5 ° (No load condition) Torque 20 ft/lb with specified voltage Maximum Load: 40 lb (18.16 kg) at 5 inches (12.7 cm) from tilt table surfac ...
-
Pelco PT55OP - page 15
Pelco Manual C325M-C (6/99) 15 Figure 7. PT550P Series Dimension Drawing GENERAL Construction: Aluminum plate; all internal parts corrosion protected Environment: Indoor/outdoor; completely weather proofed Temperature: -10 ° F to 120 ° F (-23 ° C to 49 ° C) Dimensions: See Figure 7 Weight: 22 lb (9.9 kg) Shipping Weight: PT550P/PP 25 lb (11.5 k ...
-
Pelco PT55OP - page 16
16 Pelco Manual C325M-C (6/99) 8.0 WARRANTY AND RETURN INFORMA TION W ARRANTY P elco will repair or replace, without charge, any merchandise prov ed defectiv e in material or wor kman- ship for a period of one year after the date of shipment. Exceptions to this warranty are as noted belo w: • Five y ears on FT/FR8000 Ser ies fiber optic products. ...
¿Tienes una pregunta acerca de Pelco PT55OP?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pelco PT55OP, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pelco PT55OP probablemente compartirá una forma de solucionarlo.