Español dropdown-ico

Manual de instrucciones Aerus CC3610

24 de páginas 0.3 mb
Descargar

Pasar a la página of 24

Summary
  • Aerus CC3610 - page 1

    Installa tion/Oper a tion CC3610 and CC3710 Series Color Camer a C2914M-F (08/05) Pelco Worldwide Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.pelco.com USA & Canada: Tel 800/289-9100 • FAX 800/289-9150 International: Tel: 1-559/292-1981 • FAX 1-559/348-1120 ...

  • Aerus CC3610 - page 2

    [ 2 ] Pelco Manual C2914M-F (08/05) ® Pelco, the Pelco logo, Spectra, Genex, Legacy , Esprit and Camclosure are registered trademarks of Pelco. ™Endura and ExSite are trademarks of Pelco ™DLP is a trademark of T exas Instruments, Inc. ™SuperHAD CCD is a trademark of the Sony Corporation. © Copyright 2005, Pelco. All rights reserved. ...

  • Aerus CC3610 - page 3

    Pelco Manual C2914M-F (08/05) [ 3 ] CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ........................................................................................................... 4 REGULA TORY NOTICES ............................................................................................................. .................... 5 DESCRIPTION ...

  • Aerus CC3610 - page 4

    [ 4 ] Pelco Manual C2914M-F (08/05) This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are impor- tant operating and maintenance instructions in the literature accompanying this unit. Please thoroughly familiarize yourself with the information in this manu ...

  • Aerus CC3610 - page 5

    Pelco Manual C2914M-F (08/05) [ 5 ] REGULA T OR Y NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVI ...

  • Aerus CC3610 - page 6

    [ 6 ] Pelco Manual C2914M-F (08/05) DESCRIPTION CC3610 and CC3710 Series cameras are color video cameras with a 1/3-inch CCD imager . All cameras have a direct drive/auto iris lens connector and adjustable back focus, and they accept C and CS lenses. Models CC3610H-6 High resolution (480 TV lines), Exview HAD™ CCD, 0.4 lux at F1.2, NTSC, 12 VDC/2 ...

  • Aerus CC3610 - page 7

    Pelco Manual C2914M-F (08/05) [ 7 ] CAMERA LA Y OUT Figure 1. Camera Layout INST ALLA TION Lens Mounting CC3610 and CC3710 Series cameras can use fixed iris, manual iris, auto iris, or direct drive lenses. Cameras are factory-set for CS-mount lenses, but are easily adjusted for C-mount lenses. 1. C-Mount Lens Onl y - Loosen the two back focus locki ...

  • Aerus CC3610 - page 8

    [ 8 ] Pelco Manual C2914M-F (08/05) Camera Mounting Mounting points are provided on the top and bottom of the camera and are used to mount the camera on a bracket or tripod. They are designed to accept standard photographic mounting bolts (1/4-inch UNC-20). The mounting bracket must be capable of supporting the weight of the camera and its lens. NO ...

  • Aerus CC3610 - page 9

    Pelco Manual C2914M-F (08/05) [ 9 ] CONNECTIONS CC3610 and CC3710 Series cameras offer standard power and coax video connectors as well as an RJ45-10 connector that combines low voltage power and video (composite or UTP). These cameras also have a service connector allowing a video monitor to be connected locally to the camera using a composite vid ...

  • Aerus CC3610 - page 10

    [ 10 ] Pelco Manual C2914M-F (08/05) Low V olt age Power Supply Cameras fitted with an automatic-switching low voltage power supply operate at 10.8 to 13.8 VDC (12 VDC -10% +15%) or 20.4 to 27.6 V AC (24 V AC ±15%) at 50/60Hz. Connections and polarity are indicated adjacent to the screw terminals on the rear panel. Refer to T able B for the recomm ...

  • Aerus CC3610 - page 11

    Pelco Manual C2914M-F (08/05) [ 11 ] RJ45-10 Connections The RJ45-10 connector allows video (composite and twisted pair) and power connections to be made to the camera using a single Cat5-style cable. NO TE: The PCM150 camera mount is designed for the CC3610 and CC3710 Series camera. It comes with preconfigured auxiliary connectors and cables as we ...

  • Aerus CC3610 - page 12

    [ 12 ] Pelco Manual C2914M-F (08/05) Ser vice Connection The service connector allows a video monitor to be connected locally to the camera using a 2.5 mm plug to composite video BNC cable. Figure 5. Service Connector NO TE: Inserting the plug into the service connector disconnects video from the composite BNC connector on the rear panel of the cam ...

  • Aerus CC3610 - page 13

    Pelco Manual C2914M-F (08/05) [ 13 ] CAMERA SETUP Lens Setup and Focus Procedures Video Drive or Direct Drive (DC) Auto Iris Lens 1. Set the ESC switch and AGC switch to OFF . 2. Adjust the lens for the optimum picture. Video Drive Refer to the lens instructions and adjust the lens for the optimum picture (video output level of 1 V peak-to-peak). D ...

  • Aerus CC3610 - page 14

    [ 14 ] Pelco Manual C2914M-F (08/05) Back F ocus Adjustment The back focus adjustment is located at the front of the camera and is accessible from either side of the case. T o adjust the back focus: 1. Loosen the two back focus locking screws (one on each side). 2. T urn the back focus ring counterclockwise until the CCD sensor assembly is as far a ...

  • Aerus CC3610 - page 15

    Pelco Manual C2914M-F (08/05) [ 15 ] Switch Settings NO TE: Under most conditions, no setting of switches will be required. Please read the details of each switch before making any adjustments. AGC (Automatic Gain Control) - Switch Setting 1 Automatically adjusts the image to compensate for low levels of illumination. Choose between the following s ...

  • Aerus CC3610 - page 16

    [ 16 ] Pelco Manual C2914M-F (08/05) Flickerless - Switch Setting 4 The flickerless setting can reduce the flicker caused by certain lighting conditions. The Electronic Shutter Control must be off for the correct operation of the flickerless function and is therefore automatically disabled. Choose between the following settings: ON - Enables the Fl ...

  • Aerus CC3610 - page 17

    Pelco Manual C2914M-F (08/05) [ 17 ] Camera Synchronization When using more than one camera power supply , a brief vertical roll may occur on the monitor when a camera view is switched. T o eliminate this vertical roll, it is necessary for the cameras to be synchronized. If the cameras are connected to certain Pelco matrix products, the cameras wil ...

  • Aerus CC3610 - page 18

    [ 18 ] Pelco Manual C2914M-F (08/05) SPECIFICA TIONS GENERAL Imaging Device: 1/3-inch interline transfer CCD Picture Elements CC3710H and CC3610H: NTSC 768 (H) x 494 (V); P AL 752 (H) x 582 (V) CC3710S: NTSC 510 (H) x 492 (V); P AL 500 (H) x 582 (V) Sensing Area: 6 mm diagonal Scanning System NTSC: 525 lines, 2:1 interlace P AL: 625 lines, 2:1 inte ...

  • Aerus CC3610 - page 19

    Pelco Manual C2914M-F (08/05) [ 19 ] MECHANICAL Lens Mount: C/CS mount (adjustable) Camera Mount: 1/4 –inch UNC-20 screw , top or bottom of camera housing ENVIR ONMENT AL Operating T emperature: 14° to 122°F (-10° to 50°C) Storage T emperature: 14° to 158°F (-10° to 70°C) Operating Humidity: 20% to 80%, non-condensing Storage Humidity: 20 ...

  • Aerus CC3610 - page 20

    [ 20 ] Pelco Manual C2914M-F (08/05) ...

  • Aerus CC3610 - page 21

    Pelco Manual C2914M-F (08/05) [ 21 ] ...

  • Aerus CC3610 - page 22

    [ 22 ] Pelco Manual C2914M-F (08/05) If the goods are to be sent by a FREIGHT FORWARDER, send the goods to: Pelco c/o Expeditors 473 Eccles Avenue South San Francisco, CA 94080 USA Phone: 650-737-1700 Fax: 650-737-0933 PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in ...

  • Aerus CC3610 - page 23

    Pelco Manual C2914M-F (08/05) [ 23 ] REVISION HIST ORY Manual # Date Comments C2914M 05/04 Original version. C2914M-A 07/04 Lens connector pin out changed. C2914M-B 09/04 Clarified instructions for UTP use. C2914M-C 1 1/04 Added UL warning for high-voltage models. C2914M-D 1 1/04 Revised safety instructions. C2914M-E 12/04 Revised back focus instru ...

  • Aerus CC3610 - page 24

    [ 24 ] Pelco Manual C2914M-F (08/05) Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com www.pelco.com www.pelco.com www.pelco.com www.pelco.com ISO 9001 9001 9001 9001 9001 United States | Canada | United Kingdom ...

Fabricante Aerus Categoría Security Camera

Los documentos del dispositivo Aerus CC3610 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Aerus
- manuales de instrucciones CC3610
- hojas de producto Aerus
- folletos informativos
- o etiquetas energéticas Aerus CC3610
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Aerus CC3610.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Aerus CC3610, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Aerus CC3610. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Aerus CC3610.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Aerus CC3610, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Aerus CC3610. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Aerus CC3610.

El manual de instrucciones completo de Aerus debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Aerus CC3610 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Aerus CC3610, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Aerus CC3610 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Aerus CC3610 - que deben facilitarnos los primeros pasos durante el uso de Aerus CC3610
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Aerus CC3610
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Aerus CC3610 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Aerus CC3610?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Aerus CC3610, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Aerus CC3610 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)