-
Anritsu MW9076 - page 1
MW9076 Series Optical Time Domain Reflectometer 1.31/1.45/1.55/1.625 µm (SM), 0.85/1.3 µm (GI) T omorr o ws T echnolog y , T oda y ...
-
Anritsu MW9076 - page 2
2 Highest P er formance, Functions, and Measuring Speed ■ 45 dB high dynamic range ■ 8 m short dead zone ■ Simple measurement of chr omatic dispersion fr om one end of optical fiber ■ Measurement in 10 s (Full-A uto mode), 0.15 s real-time s weep ■ A utomatic execution of functions suc h as wavelength/c hannel switc hing, file sa ving, pr ...
-
Anritsu MW9076 - page 3
3 ...
-
Anritsu MW9076 - page 4
4 ● High-Speed Measurement It takes only 10 seconds to measure and displa y the wav e- f or m and connection loss on one screen. Just one press of the Star t key is all that is needed to mak e measurement. ● Short Dead Zone Clearly measure up to near end by 8 m dead zone (back-scatter , SM unit) ● High Dynamic Range When using a wa velength o ...
-
Anritsu MW9076 - page 5
5 ● Fresnel Reflection The f ar-end F resnel reflection can be measured for f our wa velengths (1310/1450/1550/1625 nm). ● Group Delay Characteristics The fitting f or mula suppor ts cubic or quintic Sellmeier , and polynomials can be applied to various types of fibers. ● Chromatic Dispersion Characteristics The zero and total dispersion can ...
-
Anritsu MW9076 - page 6
6 Compact, Lightweight, and Easy to Operate O TDR (main frame) Lithium ion batter y mounted, with remaining power displa y Connector f or e xter nal CRT Displa y unit Measurement conditions can be changed at mea- surement screen Large easy-to-read 8.4 inch TFT -LCD Simultaneous displa y of measured results and e vent tab le Rotar y encoder f or eas ...
-
Anritsu MW9076 - page 7
7 q Status-indicating LED w Function keys e Menu key r Star t key t Arrow ke y y Select key u Batter y pack i Optical power meter connector o Visible LD output connector !0 OTDR connector and light source connector f or optical loss measure- ment !1 Exter nal monitor (V GA) connector !2 PC card slot (two PC cards con- nectable) !33333 Exter nal key ...
-
Anritsu MW9076 - page 8
8 High-Speed Measurement ● Full Automatic Mode Measurement results are displa yed by simply pressing the Star t key . All complicated settings of distance range, pulse width, attenuator , and mar ker can be automatically e xecuted. Measurement speed in this mode was significantly increased. When the wa velengths are set to ALL, w av elengths are ...
-
Anritsu MW9076 - page 9
9 V arious Useful Functions ● Waveform Comparison Function Measured and sav ed data can be compared on the same screen. In addition, differences can be displa yed as a wa vef orm for simple observation of distance and le vel dif- f erences. This is useful f or checking aging changes or comparing sev eral fibers. ● Communication Light Check Func ...
-
Anritsu MW9076 - page 10
10 ● Light Source, Power Meter Optical fiber loss can be measured using the optical powe r meter function and light source function. T w o types of optical power meters are supported: One is measurement range of –70 to +3 dBm (MW9076B/B1/C-02 option), the other is measurement range of –50 to +23 dBm (MW9076B/B1/C-03 option). ● VGA Output T ...
-
Anritsu MW9076 - page 11
11 ● Both-End Measurement Function A new w av eform can be composed by a veraging data mea- sured at both ends of an optical fiber . ● Data T ransmission Function Data files recorded by the MW9076 series can be transf erred to a PC via the RS-232C por t. ● Emulation Function Measured wa vef orm data can be analyzed using a PC. MX907600A O TDR ...
-
Anritsu MW9076 - page 12
● Report Output The ev ent table of a specified file is analyzed and the printed automatically . It is also possible to print multiple wav eforms on one page. In par ticular , at both ends measurement, the measurement results f or both ends can be output automati- cally in a repor t. In addition, the repor t can be sav ed as the Excel file. ● C ...
-
Anritsu MW9076 - page 13
13 Model MW9076B MW9076C MW9076B1 MW9076J MW9076K MW9076D1 W avelength 1310/1550 nm 1310/1550/1625 nm 1310/1550 nm 850 nm 850/1300 nm 1310/1450/1550/ ±25 nm ∗ 1 ±25 nm ∗ 1 ±25 nm ∗ 1 ±30 nm ±30 nm 1625 nm ±3 nm ∗ 1 Measurable optical fiber 10/125 µm single-mode optical fiber (ITU-T G.652) 62.5/125 µm GI fiber ∗ 2 Optical connector ...
-
Anritsu MW9076 - page 14
14 Model MW9076B MW9076C MW9076B1 MW9076J MW9076K MW9076D1 Applicable optical fibers: SM optical fiber (ITU-T G.652) Optical connectors: Shared with O TDR (same por t) Light-emitting elements: FP-LD Center wav elength: 1310/1550 ±25 nm (MW9076B, CW , 25°C) 1310/1550/1625 ±25 nm (MW9076C, CW , 25°C) Spectrum width: ≤ 5/10 nm (MW9076B, CW , 25? ...
-
Anritsu MW9076 - page 15
Model MW9076B MW9076C MW9076B1 MW9076J MW9076K MW9076D1 15 ∗ 1 At 25°C, pulse width: 1 µs ∗ 2 For GI fiber (core diameter: 62.5 µm ±3.0 nm, NA: 0.275 ±0.015, transmission loss: ≤ 3.2/0.9 dB/km (wav elength: 0.85/1.3 µm). At measurement of 50/125 µm GI fiber , the dynamic range drops by about 3.0 dB. ∗ 3 At 25°C, pulse width: SM 20 ? ...
-
Anritsu MW9076 - page 16
16 ● MU250000A/A1/A4 Display Unit MU250000A Unit: 8.4 inch color , TFT -LCD (640 × 480 pixels , transparent type, with bac k light) Display MU250000A1 Unit: 7.2 inch color , STN-LCD (640 × 480 pixels , semi-transparent type, with bac k light on/off) MU250000A4 Unit: 7.8 inch color , STN-LCD (640 x 480 pixels , reflective type , with front light ...
-
Anritsu MW9076 - page 17
Ordering Information 17 Model/order No . Name Remarks Optical Time Domain Reflectometer (main frame) MW9076B SMF 1.31/1.55 µm O TDR Requires Display Unit MW9076B1 SMF 1.31/1.55 µm OTDR Requires Display Unit MW9076C SMF 1.31/1.55/1.625 µm O TDR Requires Display Unit MW9076D1 SMF 1.31/1.45/1.55/1.625 µm O TDR Requires Display Unit MW9076J GIF 0.8 ...
-
Anritsu MW9076 - page 18
Model/order No . Name Remarks JT512MA3-NT1 PC-A T A card (512 MB) J0057 Optical adapter FC type T o connect optical fiber cable with FC connector J0635 ∗ 3 Optical fiber cord With FC-PC at both ends (SM) B0442 Soft carrying case For MW9076B/B1/C/J/K, 440 (W) × 310 (H) × 110 (D) mm Z0435 Soft carr ying case For MW9076D1(MW9076B/B1/C + MU960001A/ ...
-
Anritsu MW9076 - page 19
Selection Guide 19 Visible LD (Option 01) Display Units Main Frames Options MU250000A 8.4" TFT -LCD F or indoor , exceedingly easy to see MU250000A1 7.2" STN-LCD F or indoor , easy to see MU250000A4 7.8" STN-LCD F or outdoor , exceedingly easy to see under direct sunshine MW9076B1: High cost perf or mance F or SM fiber F or GI fiber ...
-
Anritsu MW9076 - page 20
ANRITSU CORPORA TION 5-10-27, Minamiazabu, Minato-ku, T okyo 106-8570, Japan Phone: +81 - 3 - 3446 - 1111 T elex: J34372 F ax: +81 - 3 - 3442 - 0235 • • U.S.A. ANRITSU COMP ANY North American Region Headquar ters 1155 East Collins Blvd., Richardson, Tx 75081, U.S .A. T oll Free: 1 - 800 - ANRITSU (267 - 4878) Phone: +1 - 972 - 644 - 1777 F ax: ...
¿Tienes una pregunta acerca de Anritsu MW9076?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Anritsu MW9076, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Anritsu MW9076 probablemente compartirá una forma de solucionarlo.