-
HP S7300CL - page 1
Compaq Presario Desktop Products Upgrading and Ser vicing Guide ...
-
HP S7300CL - page 2
The informati on in this document is subject to chan ge without notice. Hewlett-Packard ® Company makes no warranty of an y kind with regard to this material, including, but not lim i ted to, the implied w arranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or cons ...
-
HP S7300CL - page 3
Upgrading and Ser vicing Guide iii upgrading and serv i cing the pc ...................................................... 1 preparing the pc ............................................................................ 1 removing or upgr ading a drive ...................................................... 2 locating drive positions ................ ...
-
HP S7300CL - page 4
iv Upgrading and Ser v icing Guide ...
-
HP S7300CL - page 5
Upgrading and Ser vicing Guide 1 upgrading and ser vicing the pc This guide describes procedures for ac cessing the internal parts of the PC and installing components. NOTE: The procedures for the S0000 and 8000 series models are t he same except whe re noted. IN 8000 series model and S0000 series model preparing the pc Before you upgrade any compo ...
-
HP S7300CL - page 6
2 Upgrading and Ser vicing Guide removing the pc access panel on the 8000 series 8 Remove the fr ont bezel by following the appropriate method for your PC model: • T o re move the fro nt bezel from the S0000 series model, gently pr y the top section (1) of the bezel away from the cha ssis. On the in side of the front bezel, press the center two t ...
-
HP S7300CL - page 7
Upgrading and Ser vicing Guide 3 locating drive positions 1 Optical drive, may be a CD-ROM, CD-RW , DVD-ROM, or DVD+ RW/+R drive 2 Second optical drive, may be a DVD- ROM, DVD+R W/+R, CD-ROM, CD-RW drive, or 7-In-1 memor y card reader (select mod els only) 3 Diskette (flop py) drive 4 Hard disk drive drive positions on the S0000/8000 serie s (S0000 ...
-
HP S7300CL - page 8
4 Upgrading and Ser vicing Guide disconnecting the hard disk drive cables 4 Release the drive fro m the chassis by foll owing the method appropriate for your PC model. • T o release a drive from the chassis of the S0000 series, lift th e release tab (1) on the lat ch drive bracket of the drive you want to remove, and then slide the drive from its ...
-
HP S7300CL - page 9
Upgrading and Ser vicing Guide 5 NOTE: If you have the S0000 series , and you removed a 7-In-1 memory ca rd reader, continue to step 7; otherwise, you ar e finished with the task of removing a drive fro m the chassis. If you have the 8000 se ries and you removed a hard disk drive, a 7-In-1 memory card reader, or an optical drive, you are also finis ...
-
HP S7300CL - page 10
6 Upgrading and Ser vicing Guide 2 Slide the drive into the drive bay (1) , making sure to align the guide screw s with the guid e slots, until it snaps into place. sliding the drive into the drive bay on the S0000/8000 (S0000 shown) 3 Reconnect the power and data cables to your drive as indicated in the fo llowing illustrations. reconnecting the 7 ...
-
HP S7300CL - page 11
Upgrading and Ser vicing Guide 7 2 Press inward on each sid e of the bracket brace ( 3 ), and lower the bracket until it snaps into place over the diskette drive. Ensur e that the guide screw s ( 4 ) are installed in the adapter . 3 Return to “replacing or a dding a drive” on page 5, and begin with step 1. 2 2 1 3 2 4 replacing the diskette dri ...
-
HP S7300CL - page 12
8 Upgrading and Ser vicing Guide replacing or adding a memor y module Upgrade the memory in your PC with memory of the same type and speed as the memory originally installed in your PC. CAUTION: When handling a memo ry module, be careful not to touch any of the contacts. Doing so may damage the module. 1 Open both latches of the memor y module sock ...
-
HP S7300CL - page 13
Upgrading and Ser vicing Guide 9 to remove an expansion card 1 Complete the procedur e described in “preparing the pc” on page 1, but d o not remove the front bezel. • T o remo ve an expansion card from the S0000 series, continue to step 2. • T o remo ve an expansion card from the 8000 series, skip to st ep 3. 2 On the S0000 s eries, on the ...
-
HP S7300CL - page 14
10 Upgrading and Ser vicing Guide • If you have an 8000 ser ies, continue to step 2. • If you have an S0000 series, skip to step 3. 2 For the 8000 series, secure the expansion card to the chassis with th e slot cover screw . 3 For both the S0000 and 8000 series, if you have replaced an expansion card, store the old card in the anti-static packa ...
-
HP S7300CL - page 15
Upgrading and Ser vicing Guide 11 replacing the side access panel on the S0000 series replacing the side access panel on the 8000 series 3 Reconnect the power cable ( 1 ) to the PC, and plug the cable into an electrical outlet ( 2 ). reconnecting the power cable on the S0000/8000 (S0000 shown) 4 Reconnect the mod em/teleph one cable, if present. 5 ...
-
HP S7300CL - page 16
Printed in ...
¿Tienes una pregunta acerca de HP S7300CL?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con HP S7300CL, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con HP S7300CL probablemente compartirá una forma de solucionarlo.